• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.12 no.1
• /
• pp.34-61
• /
• 1986

The microstructural transitions of aqueous micellar solutions of cetyltrime-thylammonium bromide and sodiumdodecyl sulfate by adding 1-hexanol were investigated, measuring the concentrations of equilibrated phases and the electrical conductivities at the low concentrations of surfactants, where the solobilities of 1-hexanol varied significantly, at 3$0^{\circ}C$ and 45$^{\circ}C$. Ternary phase diagrams of multiphase regions, constructed by liquid chromatography analysis and by counting the number of phase of samples, consisted of one three-phase region and three two-phase regions. One of the two-phase regions was found to equilibrate an aqueous micellar solution and a liquid crystal, and had a critical point between them. Near this region, the solubility curve varied abruptly, and the isotropic solution turned birefrigent. The conductivities of the single phase regions above the critical point increased up to a certain point as 1-hexanol added, and then decreased, representing the microstructural transition at the supercritical region. Further, the solubility of 1-hexanol in aqueous micellar solution was found to increase as temperature and the number of hydrophilelipophile balance of surfactants increase.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.180.1-180.1
• /
• 2003

Eukaryotic DNA topoisomerase I (top I) is an essential enzyme that act to relax supercoiled DNA during the transcription, replication and mitosis. Intracellular levels of top I are elevated in a number of human solid tumors, relative to the respective normal tissues, suggesting that controlling the topI level is important to treat cancer. Top I poisons show their antitumor activities by stabilizing the cleavable ternary complex consisting of top I enzyme, DNA, and drug. Thus, top I is a promising target for the development of new cancer chemotherapeutics against a number of solid tumors. (omitted)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.594-599
• /
• 2007

[ $CulnS_2$ ] thin films were synthesized by sulfurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furnace annealing at temperature $200^{\circ}C$. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_2$ thin films with non-stoichiometry composition. $CuInS_2$ thin film was well made at the annealed $200^{\circ}C$ of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and Hall measurement system. The compositional deviations from the ideal chemical formula for $200^{\circ}C$ material can be conveniently described by non-molecularity$({\Delta}x=[Cu/In]-1)$ and non-stoichiometry $({\Delta}y=[{2S/(Cu+3In)}-1])$. The variation of ${\Delta}x$ would lead to the formation of equal number of donor and accepters and the films would behave like a compensated material. The ${\Delta}y$ parameter is related to the electronic defects and would determine the type of the majority charge carriers. Films with ${\Delta}y>0$ would behave as p-type material while ${\Delta}y<0$ would show n-type conductivity. At the sane time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}cm^{-3},\;312.502cm^2/V{\cdot}s\;and\;2.36{\times}10^{-2}\;{\Omega}{\cdot}cm$, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.4
• /
• pp.3-19
• /
• 2009

This paper proposes efficient scalar multiplication algorithms based on Montgomery ladder method. The proposed algorithm represents the scalar as ternary or quaternary and applies new composite formulas utilizing only x coordinate on affine coordinate system in order to improve performance. Furthermore, side-channel atomicity mechanism is applied on the proposed composite formulas to prevent simple power analysis. The proposed methods saves at least 26% of running time with the reduced number of storage compared with existing algorithms such as window-based methods and comb-based methods.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.19-30
• /
• 2005

Packet classification is defined as the action to match the packet with a set of predefined rules. One of classification is to use Ternary Content Addressable Memory hardware search engine that has faster than other algorithmic methods. However, TCAM has some limitations. One of them is that TCAM can not perform range matching efficiently. A range has to be expanded into prefixes to fit the boundary. In general, the number of expansion could be up to 2w-2, where w is the width of the field. For example, if two range fields with 16 bits are used, there could be up to $30\;{\times}\;30\;=\;900$ expansions for a single rule. In this paper, we describe the novel algorithm for converting range matching rules into TCAM entry efficiently. The number of maximum entry is 2w-4 when using the algorithm. Furthermore, it has also benefit about the negation range. In the result of experimentation, the new scheme practically reduces 14 percent in case that searched fields are source port and destination port number.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.239-247
• /
• 2016

This study aims to examine absorption characteristics of toluene, isopropyl alcohol (IPA), ethyl acetate (EA), and ternary-compounds, all of which are widely used in industrial processes, by means of four types of commercial activated carbon substances. It turned out that among the three types of volatile organic compounds, the breakthrough point of activated carbon and that of IPA, whose affinity was the lowest, were the lowest, and then that of EA and that of toluene in the order. With the breakthrough point of IPA, which was the shortest, as the standard, changes in the breakthrough points of unary-compounds, binary-compounds, and ternary-compounds were examined. As a result, it turned out that the larger the number of elements, the lower the breakthrough point. This resulted from competitive adsorption, that is, substitution of substances with a low level of affinity with those with a high level of affinity. Hence, the adsorption of toluene-IPA-EA and ternary-compounds require a design of the activated carbon bed based on the breakthrough of IPA, and in the design of activated carbon beds in actual industries as well, a substance whose level of affinity is the lowest needs to be the standard.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.238-246
• /
• 2005

We conducted this investigation to observe competitive adsorption phenomena among the heavy metals onto the available sorption sites of soil particle surfaces in sandy clay loam and clay soil collected from Nonsan city, Chungnam and Yoosung, Daejeon in Korea, respectively. Polluted and contaminated soils can often contain more than one heavy metal species, resulting in competition for available sorption sites among heavy metals in soils due to complex competitive ion exchange and specific sorption mechanism. And the adsorption characteristics of the heavy metals were reported that the selectivity for the sorption sites was closely related with electropotential and electro negativity carried by the heavy metals. The heavy metals were treated as single, binary and ternary systems as bulk solution phase. Adsorption in multi-element system was different from single-element system as Cr, Pb and Cd. The adsorption isotherms showed the adsorption was increased with increasing equilibrium concentrations. For binary and ternary systems, the amount of adsorption at the same equilibrium concentration was influenced by the concentration of individual ionic species and valence carried by the respective heavy metal. Also we found that the adsorption isotherms of Cd and Pb selected in this experiment were closely related with electronegativity and ionic potential regardless number of heavy metals in solution, while the adsorption of Cr carried higher valance and lower electro negativity than Cd and Pb was higher than those of Cd and Pb, indicating that adsorption of Cr was influenced by ionic potential than by electronegativity. Therefore adsorption in multi-element system could be influenced by electronegativity and ionic potential and valance for the same valance metals and different valance, respectively. But it still needs further investigation with respect to ionic strength and activity in multi-element system to verify sorption characteristics and reaction processes of Cr, especially for ternary system in soils.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1610-1620
• /
• 2015

A major problem in conventional multilevel inverter is that an increase in power semiconductor switches causes an increase in cost and switching losses of the inverter. The multicarrier strategy adopted for the multilevel inverters has become more popular due to reduced cost, lower harmonic distortion, and higher voltage capability than the conventional switching strategy applied to inverters. Various topologies and modulation strategies have been reported for utility and drive applications. Level shifted based pulse width modulation techniques are proposed to investigate the performance of the multilevel inverter. The proposed work focuses on reducing the utilized switches so that the cost and the switching losses of the inverter do not go up and the consistent efficiency could be achieved. This paper presents the detailed analysis of these topologies. The analysis is based on the number of switches, DC sources, output level, maximum voltage, and the efficiency. As an illustration, single phase cascaded multilevel inverter topologies are simulated using MATLAB/SIMULINK and the experimental results demonstrate the viability of these inverters.

• Journal of the Korean Mathematical Society
• /
• v.53 no.1
• /
• pp.187-199
• /
• 2016

The r-ary number sequences given by $$(b^{(r)}_n)_{n{\geq}0}=\Large{\frac{1}{(r-1)n+1}}(^{rn}_n)$$ are analogs of the sequence of the Catalan numbers ${\frac{1}{n+1}}(^{2n}_n)$. Their history goes back at least to Lambert [8] in 1758 and they are of considerable interest in sequential testing. Usually, the sequences are considered separately and the generalizations can go in several directions. Here we link the various r first by introducing a new combinatorial structure related to GR trees and then algebraically as well. This GR transition generalizes to give r-ary analogs of many sequences of combinatorial interest. It also lets us find infinite numbers of combinatorially defined sequences that lie between the Catalan numbers and the Ternary numbers, or more generally, between $b^{(r)}_n$ and $b^{(r+1)}_n$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5826-5841
• /
• 2019

In our previous research, we proposed a tag emotion-based item recommendation scheme. The ternary associations among users, items, and tags are described as a three-order tensor in order to capture the emotions in tags. The candidates for recommendation are created based on the latent semantics derived by a high-order singular value decomposition technique (HOSVD). However, the tensor is very sparse because the number of tagged items is smaller than the amount of all items. The previous research do not consider the previous behaviors of users and items. To mitigate the problems, in this paper, the item-based collaborative filtering scheme is used to build an extended data. We also apply the probabilistic ranking algorithm considering the user and item profiles to improve the recommendation performance. The proposed method is evaluated based on Movielens dataset, and the results show that our approach improves the performance compared to other methods.