• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.712-723
• /
• 2015

This study was conducted to develop the SWCC estimation equation using scaling technique, and to investigate relative sensitivity of the SWCC according to the soil water tension, for the four kinds of soil texture such as Sand [S], Sandy Loam [SL], Loam [L] and Clay Loam [CL]. The SWCC estimation equation of scale factor [${\Theta}sc$] (Eq. 1) was developed based on the log function (Eq. 2) and exponential function (Eq. 3). ${\Theta}sc=[({\Theta}-{\Theta}r)/({\Theta}s-{\Theta}r)]$ (Eq. 1) ${\Theta}sc=-0.196ln(H)+0.4888$ (Eq. 2) ${\Theta}sc=0.3804(H)^{(-0.448)}$ (Eq. 3) where, ${\Theta}$: water content (g/g %), ${\Theta}s$: water content at 0.1bar, ${\Theta}r$: water content at 15bar, H: soil water tension (matric potential) (bar) Relative sensitivity of soil water content was decreased as increase soil water tension, those according to soil water tension were 0.952~0.620 compared to 0.1bar case. Relative sensitivity of scale factor was also decreased as increase soil water tension, those according to soil water tension were 0.890~0.577 compared to 0.2bar case.

• 대한토목학회논문집
• /
• 제32권5A호
• /
• pp.255-266
• /
• 2012

현수교 주케이블은 완성시 교량의 구조적 건전성을 나타내는 중요한 지표이다. 주케이블은 가설완료시 자유 매달림(free hanging) 상태의 형상이 되며 교량완성시 행어, 보강형 등의 고정하중을 지지하여 가설완료시 형상과는 차이가 발생한다. 따라서, 주케이블의 가설완료시 형상이 교량완성시 형상에 직접적인 영향을 미치므로 가설중 형상관리가 매우 중요하다. 주케이블의 가설중 형상관리는 중앙 및 측경간은 새그조정으로, 정착경간은 장력조정으로 수행된다. 새그조정은 새그조절량에 대한 스트랜드 길이 조절량을 나타내는 산정값인 새그민감도가 필요하며 장력조정은 온도변화에 대한 장력변화량을 나타내는 장력민감도가 필요하다. 이에 본 연구에서는 케이블 형상가정에 따라 유도된 기본식과 이로부터 도출된 미분 관계식으로부터 새그 및 장력민감도를 산정하는 방법을 제안하였다. 그리고, 다양한 새그변화 요인에 대해 현수선 기본식을 사용한 비선형 수치해석 새그민감도 계산 흐름도를 제안하여 미분관계식을 적용한 새그민감도 결과와 비교하였다. 또한, 각 새그변화 요인이 복합적으로 발생함으로 이를 고려하여 케이블의 최종 새그변화량을 산정하는 방법을 제안하였다. PPWS 공법으로 시공중인 실교량을 대상으로 PPWS의 길이변화 및 온도변화, 경간장변화 등의 다양한 시공여건의 변화에 따른 새그 및 장력민감도를 산정하였다. 본 연구내용이 주케이블 가설중 형상관리 방법에 대한 체계적인 지침이 되기를 바라며, 향후 실교 현장적용 및 실증에 의해 완성도를 높일 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1141-1146
• /
• 1993

The problem of tension control in metal-strip processing line is discussed. A new mathematical dynamic model which relates tension change, motor-speed change and roll-gap change is developed. Through the computer simulation of this model, parameter sensitivity, the tension transfer phenominon, and static and dynamic characteristics of strip tension were studied. Guidelines are developed to help one selecting locations of the master-speed drive in multi-drive speed control for tension adjustment and reducing the effect of interaction between tension and roll gap control.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.109-115
• /
• 2008

A Plastic Bonded Explosive(PBX) is mainly composed of nitramine explosive and polymer binder. The great number of serious applications of PBX requires the good adhesion between nitramine crystals and binder, which depends on the surface characteristics of a filler and binder. In the pursuit of the better design to achieve the enhanced adhesion, profound knowledge of the surface and interfacial characteristics of explosive and binder should be exploited. In this study, the influences of physicochemical properties between RDX and binders such as interfacial tension($\gamma_{SL}$), latent heat($Q_m$), and density($\rho$) on impact sensitivity of PBX were investigated. As experimental results, the major contribution factor to impact sensitivity of PBX was the interfacial tension, compare with other surface properties. The correlation coefficient of $H_{50}$ versus $\gamma_{SL}$ is 0.9932 when a polynomial regression method was used.

• The Korean Journal of Physiology and Pharmacology
• /
• 제13권3호
• /
• pp.189-194
• /
• 2009

This study was designed to clarify the mechanism of the inhibitory effect of forskolin on contraction, cytosolic $Ca^{2+}$ level $([Ca^{2+}]_i)$, and $Ca^{2+}$ sensitivity in guinea pig ileum. Forskolin (0.1 nM ${\sim}$ 10 ${\mu}M$) inhibited high $K^+$ (25 mM and 40 mM)- or histamine (3 ${\mu}M$)-evoked contractions in a concentration-dependent manner. Histamine-evoked contractions were more sensitive to forskolin than high $K^+$-evoked contractions. Spontaneous changes in $[Ca^{2+}]_i$ and contractions were inhibited by forskolin (1 ${\mu}M$) without changing the resting $[Ca^{2+}]_i$. Forskoln (10 ${\mu}M$ ) inhibited muscle tension more strongly than $[Ca^{2+}]_i$ stimulated by high $K^+$, and thus shifted the $[Ca^{2+}]_i$-tension relationship to the lower-right. In histamine-stimulated contractions, forskolin (1 ${\mu}M$) inhibited both $[Ca^{2+}]_i$ and muscle tension without changing the $[Ca^{2+}]_i$-tension relationship. In ${\alpha}$-toxin-permeabilized tissues, forskolin (10 ${\mu}M$) inhibited the 0.3 ${\mu}M$ $Ca^{2+}$-evoked contractions in the presence of 0.1 mM GTP, but showed no effect on the $Ca^{2+}$-tension relationship. We conclude that forskolin inhibits smooth muscle contractions by the following two mechanisms: a decrease in $Ca^{2+}$ sensitivity of contractile elements in high $K^+$-stimulated muscle and a decrease in $[Ca^{2+}]_i$ in histamine-stimulated muscle.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.31-35
• /
• 2018

When REBCO coated conductors (CCs) are applied to superconducting devices such as coils and magnets, they are subjected to deformation in various modes such as compression/tension bending, uniaxial/transverse tension and torsion. Despite outstanding performances by REBCO CC tapes, their electromechanical properties have been evaluated primarily under uniaxial tension, therefore data about the critical current ($I_c$) response in the compressive strain region are lacking. In this study, the characteristic responses of $I_c$ in REBCO CC tapes under bending strains in the range from tensile to compressive were evaluated. The springboard bending beam was used, wherein the CC tape sample was soldered onto the surface of the springboard. A Goldacker-type bending test rig, which lacks a support holding the sample during testing, was used as a comparator. Degradation in $I_c$ behaviors, including strain sensitivity, in differently processed REBCO CC tapes were examined based on the test rig used.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.16-21
• /
• 2022

This study investigates the effect of the deformation on the sensitivity of a flexible polydimethylsiloxane (PDMS) membrane sensor. A PDMS membrane sensor was developed to measure the impact force of a water droplet using a silver nanowire (AgNW). The initial deformation of the membrane was confirmed with the application of a tensile force (i.e., tension) and fixing force (i.e., compressive force) at the gripers, which affects the sensitivity. The experimental results show that as the tension applied to the membrane increased, the sensitivity of the sensor decreased. The initial electrical resistance increased as the fixing force increased, while the sensitivity of the sensor decreased as the initial resistance increased. The movement of the membrane due to the impact force of the water droplet was observed with a high-speed camera, and was correlated with the measured sensor signal. The analysis of the motion of the membrane and droplets after collision confirmed the periodic movement of not only the membrane but also the change in the height of the droplet.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.627-644
• /
• 2004

In this study, the endochronic theory was used to investigate the collapse of thick-walled tubes subjected to external pressure and axial tension. The experimental and theoretical findings of Madhavan et al. (1993) for thick-walled tubes of 304 stainless steel subjected to external pressure and axial tension were compared with the endochronic simulation. Collapse envelopes for various diameter-to-thickness tubes under two different pressure-tension loadings were involved. It has been shown that the experimental results were aptly described by the endochronic approach demonstrated from comparison with the theoretical prediction employed by Madhavan et al. (1993). Furthermore, by using the rate-sensitivity function of the intrinsic time measure proposed by Pan and Chern (1997) in the endochronic theory, our theoretical analysis was extended to investigate the viscoplastic collapse of thick-walled tubes subjected to external pressure and axial tension. It was found that the pressure-tension collapse envelopes are strongly influenced by the strain-rate during axial tension. Due to the hardening of the metal tube of 304 stainless steel under a faster strain-rate during uniaxial tension, the size of the tension-collapse envelope increases.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.559-577
• /
• 2016

There are many theoretical analyses and experimental studies of the hydrodynamics for the tension leg platform (TLP) of a floating wind turbine. However, there has been little research on the arrangement of the TLP's internal structure. In this study, a TLP model and a 5-MW wind turbine model as proposed by the Minstitute of Technology and the National Renewable Energy Laboratory have been adopted, respectively, to comprehensively analyze wind effects and wave and current combinations. The external additional coupling loads on the TLP and the effects of the loads on variables of the internal structure have been calculated. The study investigates preliminary layout parameters-namely, the thickness of the tension leg body, the contact mode of the top tower on the tension leg, the internal stiffening arrangement, and the formation of the spoke structure-and conducts sensitivity analyses of the TLP internal structure. Stress is found to be at a maximum at the top of the tension leg structure and the maximum stress has low sensitivity to the load application point. Different methods of reducing maximum stress have been researched and analyzed, and the effectiveness of these methods is analyzed. Filling of the spoke structure with concrete is discussed. Since the TLP structure for offshore wind power is still under early exploration, arrangements and the configuration of the internal structure, exploration and improvements are ongoing. With regard to its research and analysis process, this paper aims to guide future applications of tension leg structures for floating wind turbine.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.42-45
• /
• 2003

Nondestructive damage sensing and mechanical properties for acid-treated carbon nanotube (CNT) and nanofiber (CNF)/epoxy composites were investigated using electro-micromechanical technique and acoustic emission (AE). Carbon black (CB) was used to compare to CNT and CNF. The results were compared to the untreated case. The fracture of carbon fiber was detected by nondestructive acoustic emission (AE) relating to electrical resistivity under double-matrix composites test. Sensing for fiber tension was performed by electro-pullout test under uniform cyclic strain. The sensitivity for fiber damage such as fiber fracture and fiber tension was the highest for CNT/epoxy composites. Reinforcing effect of CNT obtained from apparent modulus measurement was the highest in the same content. For surface treatment case, the damage sensitivity and reinforcing effect were higher than those of the untreated case. The results obtained from sensing fiber damage were correlated with the morphological observation of nano-scale structure using FE-SEM. The information on fiber damage and matrix deformation and reinforcing effect of carbon nanocomposites could be obtained from electrical resistivity measurement as a new concept of nondestructive evaluation.