• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.585-599
• /
• 2016

Steel cables serve as the key structural components in long-span bridges, and the force state of the steel cable is deemed to be one of the most important determinant factors representing the safety condition of bridge structures. The disadvantages of traditional cable force measurement methods have been envisaged and development of an effective alternative is still desired. In the last decade, the vision-based sensing technology has been rapidly developed and broadly applied in the field of structural health monitoring (SHM). With the aid of vision-based multi-point structural displacement measurement method, monitoring of the tensile force of the steel cable can be realized. In this paper, a novel cable force monitoring system integrated with a multi-point pattern matching algorithm is developed. The feasibility and accuracy of the developed vision-based force monitoring system has been validated by conducting the uniaxial tensile tests of steel bars, steel wire ropes, and parallel strand cables on a universal testing machine (UTM) as well as a series of moving loading experiments on a scale arch bridge model. The comparative study of the experimental outcomes indicates that the results obtained by the vision-based system are consistent with those measured by the traditional method for cable force measurement.

• 한국전산구조공학회논문집
• /
• 제31권2호
• /
• pp.115-120
• /
• 2018

본 논문에서는 PSC 거더의 긴장력을 계측하기 위한 EM 센싱 기법을 다양한 PS 텐던에 적용하기 위하여 PS 강종별 긴장력 변화에 따른 자기이력 모니터링 결과를 소개한다. PSC 교량의 성능평가에 있어 PS 텐던의 긴장력은 매우 중요한 인자이나 현재는 시공시 설계 긴장력의 도입 여부만을 검증하고 그 이후에는 긴장력 관리가 이루어지지 않는 실정이다. 이를 계측하기 위하여 EM 센서를 이용하여 긴장력을 계측하는 기법에 대한 연구가 이루어지고 있으나 PSC 거더에 사용되는 모든 PS 텐던에 대한 연구는 이루어지지 않았다. 이에 본 연구에서는 PSC 교량에 주로 사용되는 B, C, D종 PS 텐던에 대해 EM 센싱 기법을 적용하기 위하여 각 강종별 긴장력에 따른 자기 이력 변화를 모니터링하였다. 이를 위해 B종 12.7mm, C종 15.2mm, D종 15.2mm PS 텐던 시편에 50, 100, 150, 180kN의 긴장력을 도입하고 각 긴장력 단계마다 자기 이력 곡선을 EM 센서를 통하여 계측하였다. 계측 결과 각 긴장력 단계마다 그 투자율이 정량적으로 변화하는 것을 확인할 수 있었다. 특히 B, C 종의 경우 단면적이 달라 선형회귀분석식의 상수는 상이하지만 유사한 기울기를 가지고 변화하고 D종의 경우 다른 강종과 다른 기울기를 가지고 변화하는 것을 확인하였다.

• 한국강구조학회 논문집
• /
• 제22권1호
• /
• pp.21-31
• /
• 2010

본 연구에서는 구조 케이블의 인장력 모니터링을 위한 무선 임피던스 센서노드를 개발하였다. 이를 위해 다음과 같은 연구가 수행되었다. 첫째, 경제적이고 자동화된 구조 케이블의 인장력 모니터링을 위한 무선임피던스 센서노드를 설계/제작 하였다. 둘째, 자동화된 인장력 모니터링을 위해 임피던스 기반 모니터링 기법을 무선 센서노드에 내장하였다. 셋째, 측정 범위가 제한적인 무선임피던스 센서노드의 한계점을 극복하기 위하여 인터페이스 와셔를 이용하는 구조케이블 인장력 모니터링 기법을 제안하였다. 마지막으로 내장형/외장형 텐던을 가지는 모형 프리스트레스트 콘크리트 거더에 대하여 무선임피던스 센서노드와 인터페이스 와셔를 이용하는 모니터링 기법의 적용성을 평가하였다.

• 지질공학
• /
• 제30권4호
• /
• pp.673-682
• /
• 2020

비탈면의 안정성 측면에서 파괴형태에 따라 예상 파괴면에서의 지반 전단력과 앵커보강에 의한 저항력은 중요한 요소로 작용할 수 있다. 또한, 앵커가 보강된 비탈면에서는 지압판이 설치된 지반의 풍화, 침하 및 불완전하게 방청 처리된 강연선의 부식 등으로 인하여 앵커축력이 변할 수 있다. 그러나 앵커 축력의 변화로 인해 국부적으로 앵커의 저항력을 상실한 경우에는 앵커가 저항력을 발휘하지 못하게 되어 주변 앵커로 외력이 전가되는 경향이 있으며, 이에 따라 주변앵커의 긴장력을 증가시키게 된다. 이로 인해 전체 비탈면의 안정성에 문제가 발생하게 되므로 주의가 요구된다. 따라서 본 연구에서는 비탈면에 설치되어 있는 앵커의 긴장력 변화경향을 모니터링하고 이를 고려한 비탈면 전체의 외적 안정성을 유추하는 방법을 제안하고자 하였다.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.107-122
• /
• 2016

We propose an effective methodology using electromechanical impedance characteristics for estimating the remaining tensile force of tendons and simultaneously detecting damages of the anchorage blocks. Once one piezoelectric patch is attached on the anchor head and the other is bonded on the bearing plate, impedance responses are measured through these two patches under varying tensile force conditions. Then statistical indices are calculated from the impedances, and two types of relationship curves between the tensile force and the statistical index (TE Curve) and between statistical indices of two patches (SR Curve) are established. Those are considered as database for monitoring both the tendon and the anchorage system. If damage exists on the bearing plate, the statistical index of patch on the bearing plate would be out of bounds of the SR curve and damage can be detected. A change in the statistical index by damage is calibrated with the SR curve, and the tensile force can be estimated with the corrected index and the TE Curve. For validation of the developed methodology, experimental studies are performed on the scaled model of an anchorage system that is simplified only with 3 solid wedges, a 3-hole anchor head, and a bearing plate. Then, the methodology is applied to a real scale anchorage system that has 19 strands, wedges, an anchor head, a bearing plate, and a steel duct. It is observed that the proposed scheme gives quite accurate estimation of the remaining tensile forces. Therefore, this methodology has great potential for practical use to evaluate the remaining tensile forces and damage status in the post-tensioned structural members.

• Smart Structures and Systems
• /
• 제7권4호
• /
• pp.303-317
• /
• 2011

A specially designed tendon, which is proposed by embedding an FBG sensor into the center king cable of a 7-wire strand tendon, was applied to monitor the prestress force and load transfer of ground anchor. A series of tensile tests and a model pullout test were performed to verify the feasibility of the proposed smart tendon as a measuring sensor of tension force and load transfer along the tendon. The smart tendon has proven to be very effective for monitoring prestress force and load transfer by measuring the strain change of the tendon at the free part and the fixed part of ground anchor, respectively. Two 11.5 m long proto-type ground anchors were made simply by replacing a tendon with the proposed smart tendon and prestress forces of each anchor were monitored during the loading-unloading step using both FBG sensor embedded in the smart tendon and the conventional load cell. By comparing the prestress forces measured by the smart tendon and load cell, it was found that the prestress force monitored from the FBG sensor located at the free part is comparable to that measured from the conventional load cell. Furthermore, the load transfer of prestressing force at the tendon-grout interface was clearly measured from the FBGs distributed along the fixed part. From these pullout tests, the proposed smart tendon is not only expected to be an alternative monitoring tool for measuring prestress force from the introducing stage to the long-term period for health monitoring of the ground anchor but also can be used to improve design practice through determining the economic fixed length by practically measuring the load transfer depth.

• Smart Structures and Systems
• /
• 제19권3호
• /
• pp.269-277
• /
• 2017

Recently, there has been significant interest in structural health monitoring for civil engineering applications. In this research, a specially designed tendon, proposed by embedding FBG sensors into the center king cable of a 7-wire strand tendon, was applied for long-term health monitoring of tensile forces on a ground anchor. To make temperature independent sensors, the effective temperature compensation of FBG sensors must be considered. The temperature sensitivity coefficient ${\beta}^{\prime}$ of the FBG sensors embedded tendon was successfully determined to be $2.0{\times}10^{-5}^{\circ}C^{-1}$ through calibrated tests in both a model rock body and a laboratory heat chamber. Furthermore, the obtained result for ${\beta}^{\prime}$ was formally verified through the ground temperature measurement test, expectedly. As a result, the ground temperature measured by a thermometer showed good agreement compared to that measured by the proposed FBG sensor, which was calibrated considering to the temperature sensitivity coefficient ${\beta}^{\prime}$. Finally, four prototype ground anchors including two tension ground anchors and two compression ground anchors made by replacing a tendon with the proposed smart tendon were installed into an actual slope at the Yeosu site. Tensile forces, after temperature compensation was taken into account using the verified temperature sensitivity coefficient ${\beta}^{\prime}$ and ground temperature obtained from the Korean Meteorological Administration (KMA) have been monitored for over one year, and the results were very consistent to those measured from the load cell, interestingly.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.270-276
• /
• 2020

The long-term durability of an FKM O-ring used as parts of a hydrogen station was investigated by exposing it to high-pressure gaseous hydrogen for 1, 3, and 7 days at room temperature. Changes in its sealing force were subsequently measured at 150℃ using intermittent compression stress relaxation (CSR). No changes in the tensile properties of FKM O-ring were observed, but its initial and overall sealing forces at 150℃ significantly decreased with increasing exposure time to hydrogen gas. Microvoid formation in the FKM O-ring upon exposure to high-pressure hydrogen was minimized over time after the ring was exposed to atmospheric pressure at room temperature, which prevented changes in its tensile properties. However, applying heat accelerated FKM O-ring oxidation, which decreased its sealing force. These results indicated that identifying changes in the sealing force of rubber materials using intermittent CSR is not sufficient for monitoring changes in mechanical properties under high-pressure hydrogen atmospheres; however, it is suitable for evaluating the long-term durability of sealing materials for hydrogen station applications under similar conditions.

• Advances in concrete construction
• /
• 제11권5호
• /
• pp.375-386
• /
• 2021

In this paper, a study of stability and health of a newly-built railway tunnel is presented. The field test was implemented to monitor the secondary lining due to the significant cracking behaviors influenced the stability and health of the tunnel structure. Surface strain gauges were installed for monitoring the status of crack openings, and the monitoring outputs demonstrated that the cracks were still in the developing stage. Additionally, adjacent tunnel and poor condition of surrounding rock were identified as the causes of the lining cracking by systematically characterizing the crack spatial distribution, tunnel site and surrounding rock conditions. Reconstruction of partial lining and reconstruction of the whole secondary lining were designed as the maintenance projects for different cracking regions based on the construction feasibility. For assessing the health conditions of the reinforced lining, embedded strain gauges were set up to continuously measure the strain and the internal force of the reconstructed structures. For the partially reconstructed lining, the outputs show the maximum tensile elongation is 0.018 mm during 227 days, which means the structure has no obvious deformation after maintenance. The one-year monitoring of full-section was implemented in the other two completely reconstructed cross-sections by embedded strain gauge. The outputs show the reconstructed secondary lining has undertaken the pressure of surrounding rock with the time passing. According to the calculated compressive and tensile safety factors, the completely reconstructed lining has been in reliable and safe condition during the past year after reinforcement. It can conclude that the aforementioned maintenance projects can effectively ensure the stability and health of this tunnel.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권4호
• /
• pp.121-125
• /
• 2018

본 연구에서는 음향 방출 기법을 사용하여 강연선(7-wire strand)의 손상을 감지하기 위한 기초 실험을 수행하였다. 강연선은 주로 교량에 추가적인 인장력을 제공하기 위해 널리 사용되는 건설 자재이다. 프리스트레스 교량 또는 사장교가 대표적인 경우이다. 그러나 교량 노화가 급격히 진행되면서 강연선 부식 문제가 대두되고 있다. 이러한 이유로 케이블 점검을 위한 다양한 비파괴 방법이 연구되고 있고 현장 적용이 시도되고 있다. 비파괴 방법 ??중 하나인 음향 방출 기법은 케이블 손상 및 파단을 감지하는 효과적인 기술로 알려져 있다. 본 연구에서는 음향 방출 기법의 교량에 대한 적용 가능성을 평가하기 위해 강연선의 손상에 따른 음향 방출 신호 특성을 인장 실험을 분석 하고, 현장 적용을 위한 최적 센서 주파수 타입을 선정하였다. 결과적으로, 음향 방출 기법을 활용하여 향후 교량 케이블의 부식 파단 및 파단 징후를 감지 할 수 있다고 여겨진다.