• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.43-46
• /
• 1991

Nd-Fe-B Permanent Magnet, which is recently more used, has some advantages in comparison with other permanent magnet. However, for the Nd-Fe-B has higher RTC(reversible temperature coefficient), property of the Nd-Fe-B magnet is changed by temperature rise. In this paper temperature rise of a disc type motor is calculated using a heat source network method.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.89-92
• /
• 2008

The extreme heat watch warning system(EHWWS) that Korea Meterological Administration carried out a preliminary from July 1, 2007, considered both daily maximum temperature and daily maximum heat index simultaneously. It was requested revision of the standard level of EHWWS to solve the difficulty of forecasting occurred when we were considering two parameters simultaneously and we did not considering heat index according to areas. For this, we established three type standard, such as type 1 that considered both daily maximum temperature and daily maximum heat index, Under the extreme heat day that daily minimum temperature was more than $25^{\circ}C$, type 2 that considered daily maximum temperature and type 3 that considered only daily maximum heat index and then analyzed whether these 3 types satisfies the excess mortality of the extreme heat warning or not. As a results, type 1 and 2 were more explain away excess mortality each warning step than type 3. type 2 could also apply case of not to consider heat index according to areas and had a merit for extreme heat forecasting easily because the standard was simple. Therefore we think type 2 is more suitable and reasonable standard for Korea extreme heat watch warning system(KEHWWS) than type 1. In addition, we need to develop model that exactly predicts the excess mortality will be take place during the extreme heat warning and construct KEHWWS.

• 한국환경생태학회지
• /
• 제26권5호
• /
• pp.801-811
• /
• 2012

본 연구는 도시공원의 토지피복 및 식재구조에 따른 온도 영향요인을 규명하는데 목적이 있다. 성남시 분당구 중앙공원을 대상으로 전 지역에 대한 토지피복 및 식재현황을 파악하였으며 30개의 조사구를 설정하여 정밀 토지피복 및 식재구조를 파악하고 온도는 10회 반복 측정하였다. 온도 영향요인은 토지피복유형, 식재유형, 층위구조, 녹지량(녹피율, 녹지용적계수)을 선정하여 실측 온도와의 통계분석을 실시하였다. 토지피복유형, 식재유형, 층위구조와 실측 온도와의 분산분석 결과, 토지피복유형에서 목본 식재지는 저온역으로 초지와 포장지는 고온역으로 구분되었다. 식재유형은 침엽수 및 활엽수 식재지는 저온역으로, 초지와 포장지는 고온역으로 구분되었다. 층위구조는 교목층과 교목층+하부식재 유형은 저온역으로, 초지와 포장지는 고온역으로 구분되었다. 녹지량과 실측 온도와의 상관관계 분석 결과 녹피율과 녹지용적계수는 모두 실측 온도값과 고도의 음(-)의 상관관계가 인정되었다. 녹지량과 실측 온도와의 회귀모형에 의하면 녹피율은 1% 증가할 때마다 $-0.002^{\circ}C$, 녹지용적계수는 $1m^3/m^2$ 증가할 때마다 $-0.122^{\circ}C$의 온도저감 효과가 있을 것으로 예측되었다.

• 생물환경조절학회지
• /
• 제4권1호
• /
• pp.32-42
• /
• 1995

1. 시설형태별 온도분포는 Type 1의 경우 지붕의 환기구가 없기 때문에 중력환기는 거의 일어나지 않고, 풍력환기에만 의존하게 되므로 풍속이 약한 경우는 온도가 상승하였다. Type 2 및 Type 3는 지붕의 환기구를 통하여 중력환기가 일어나기 때문에 대체로 온도 분포도 균일한 편으로 나타났다. 2. 시설형태별 평면 광분포는 Type 1가 가장 높고 Type 2, Type 3순으로 나타났다. 즉 일사투과율에 의한 지면 일사 도달율과 직접적으로 관련되기 때문에 Type 1, Type 2, Type 3순으로 지면온도 상승에 영향을 주었다. 3. 환기모델과 열수지 모델을 도입하여 환기량 및 실내온도 변화를 구한 결과, 시설형태별 풍속의 변화에 따른 내외기온차 변화는 Type 1이 가장 크고 Type 2, Type 3순이었다. Type 1의 경우 다른 형태에 비하여 풍속이 1 ㎧로 증가하면 급격히 내외기온차가 감소하였다. 4. 실측치를 사용하여 모델에 의한 풍속변화에 따른 환기량의 변화를 추정한 결과, Type 3 및 Type 2가 상대적으로 Type 1보다 낮은 경향을 나타냈다. 5. 전체적으로 개량형인 Type 2 및 Type 3은 관행형인 Type 1보다 효율적이라고 판단된다. 특히, 성력화의 차원에서 보면 Type 3이 Type 2보다 월등히 우수하기 때문에 자연적인 강우차단 능력이 보장된다면 Type 3이 Type 2보다 효율적이라고 사료된다.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.447-451
• /
• 1991

Effects of insulation after exposure of the extremities on the temperature regulation in clothed men were studied. Experiment was carried out with six males in a climatic chamber fixed at $10^{\circ}C$, $55\%$ R.H. treated with Type A (face only was exposed) and Type B (face and half of the extremities were exposed). Mean skin temperature fell greater in Type B due to intense vasoconstriction than in Type A. Rectal temperature rose a little in Type B and resumed in Type A without any significant differences in metabolism between two types of clothing. These findings suggest that Type B is more effective in physiological defense to the cold stimuli than Type A at least at $10^{\circ}C$.

• 생물환경조절학회지
• /
• 제5권2호
• /
• pp.187-193
• /
• 1996

여름철 고온기 참외재배시 환기방법에 따른 시설내 온도차이가 참외의 생육 및 품질에 미치는 영향을 구명하고자 측면환기공 환기구(Type 1), 측면환기공 환가+천정 환기공 환기구(Type 2) 및 권취식 환기구(Type 3)로 구분하여 시험을 실시한 결과를 요약하면 다음과 같다. 1. 환기방법별 온도의 하강효과는 Type 3이 가장 좋았고 Type 2, Type 1의 순으로 나타났다. 2. 환기방법에 따른 온도분포는 측면환기공만 있는 Type 1과 천정환기통 및 측면환기공이 있는 Type 2의 경우 환기공 및 환기통의 면적이 적어 중력환기 및 풍력환기가 미세하여 온도가 상승하였다. Type 3은 측면환기 면적이 넓어 풍력환기에 의한 공기의 유입, 유출이 쉬워 온도분포가 비교적 균일하였다. 3. 실측치를 이용하여 내외기온차이에 의한 환기량을 추정한 결과, Type 3이 Type 1 및 Type 2보다도 많음을 알 수 있었다. 4. 생육 및 상품성을 조사한 결과, Type 3이 Type 2, Type 1보다도 엽수 및 엽면적이 증가하여 생육이 양호하였고 과중, 과육두께, 기형과율, 상품과율 등 상품성도 우수하였다. 5. 수확시기별 상품수량은 각처리 공히 수확초기 보다는 후기로 갈수록 증가하였다. 특히 Type 3에서 뚜렷한 경향을 보였다.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.81-87
• /
• 2009

The purpose of this study is to evaluate of the outdoor thermal environment by building scale and block type as variable factors. In this study, 18 cases of office in central business district that have different condition are compared about their surface temperature, HIP(Heat Island Potential), and MRT(Mean Radiant Temperature). They are simulated with 3-dimension numerical simulation software named Hoyano-model. The output results contain visualized distribution chart and numerical data. The results of evaluation are as follows. (1)The surface temperature of the building becomes higher as building coverage ratio is higher but floor area ratio is lower. In same conditions, unified block type is maximum $3.2^{\circ}C$ higher than divided block type. (2)HIP shows different daily pattern as block type. During daytime, divided block type is much higher than unified block type but after sunset, it is changed. (3)MRT shows different distribution pattern as sunlight moves expecially at noon. (4)As the results of this study, cases that have high floor area ratio condition show lower surface temperature by tendency to stay low indoor temperature in office building and big rate of windows on building surface.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.69-78
• /
• 1998

Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.550-556
• /
• 2002

The changes of the main body temperature of a I tube 2 chamber bent silkworm type dyeing machine and the reduction of energy consumption of the dyeing machine by the energy saving design are reported. This dyeing machine was developed for the purpose of the energy saving and high efficiency. In this study, the changes of the main body temperature of the 1 tube 2 chamber bent silkworm type dyeing machine were studied experimentally. Especially the effect of the blower motor electric current and the main body pressure at various blower frequencies were studied experimentally. In the experimental data for the changes of main body temperature, it was shown that the main body temperature increased as the blower motor electric current and the main body pressure increased.

• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.178-181
• /
• 2010

An automotive IC voltage regulator which consists of one-chip based on a metal-oxide semiconductor field effect transistor (MOSFET) is investigated experimentally with three types of packaging. The closed type is filled with thermal silicone gel and covered with a plastic lid on the MOSFET. The half-closed type is covered with a plastic case but without thermal silicone gel on the MOSFET. Opened type is no lid without thermal silicone gel. In order to simulate the high temperature condition in engine bay, the operating circuit of the MOSFET is constructed and the surrounding temperature is maintained at $100^{\circ}C$. In the overshoot the maximum was mainly found at the half-closed packaging and the magnitude is dependent on the packaging type and the surrounding temperature. Also the impressed current decreased exponentially during the MOSFET operation.