• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.360-365
• /
• 2009

On this paper, piezoelectric generators using piezoelectric ceramics were designed and fabricated. Generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Generator converts wasting mechanical energy to electrical energy. Output voltage was increased when thickness of ceramic and displacement of vibration were increased. Temperature of the ceramic was increased when it generates, but the temperature rising was saturated at certain temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.169-170
• /
• 2008

On this paper, piezoelectric generators using piezoelectric ceramics were designed and fabricated. Generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Generator converts wasting mechanical energy to electrical energy. Output voltage was increased when thickness of ceramic and displacement of vibration were increased. Temperature of the ceramic was increased when it generates, but the temperature rising was saturated at certain temperature.

• 설비공학논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 1989

This paper treats the temperature effectiveness of the two-fluid counterflow regenerator in a rotary type. To avoid continual interpolation and to obtain the simple result in calculating that, it obtained the particular solution for the direct-transfer-type counterflow heat exchanger by the graphical procedures. Also, it introduced the empirical formula for the influence of the ratio of rotor matrix to minimum working fluid heat capacity rate with the particular solution induced. Particularly, substituting the published results of temperature effectiveness into the program, it obtained the simple and convenient equation which can applicate in the counterflow regenerator in a rotary type. To compare and discuss the results induced, selecting the regenerative air preheater and applying the their running datum and specifications to the related results, it shows that the above results are agree with the published results within absolute relative error, 3.0%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.177-181
• /
• 1998

In this paper, we used the $BaTiO_3$ system ceramics with high temperature stability for high voltage devision, and rosen type-piezoelectric transformer for high voltage measurement. when Line-high voltage is 13,20O[V], Input voltage of piezoelectric transformer type-actuator is about 390CV1, and output voltage of it is 26.5FVI on the no-load. And also, temperature stability from >$-25^{\circ}C$ to >$50^{\circ}C$ is less than ${\pm}4.45%$

• 대한금속재료학회지
• /
• 제48권12호
• /
• pp.1123-1129
• /
• 2010

In order to apply the Sievert's type automatic apparatus to thermal analysis of hydrogen absorbing materials, the dehydrogenation of the Mg-H system was investigated. As the initial wt% of hydrogen was increased to 4.4, the peak temperature of evolution rate shifted to higher temperature. However, with the initial wt% of hydrogen higher than 4.4, peak temperature of evolution rate did not change. The peak temperatures of evolution rate obtained by automatic apparatus were almost the same as those measured by a manual apparatus. As the heating rate was increased, the peak temperatures increased; the peak temperatures for heating rates 1, 2 and 3 K/min were 664, 687 and 702 K, respectively. The activation energy for the decomposition of Mg hydride was 101 kJ/mol. The Sievert's type automatic apparatus can be successively applied to the thermal analysis of metal hydride.

• 한국작물학회지
• /
• 제37권1호
• /
• pp.45-53
• /
• 1992

우리나라에 육성보급하고 있는 대표적인 벼품종으로 Japonica$\times$Japonica 교잡인 일반형품종 2품종(추청, 화진)과 Indica$\times$Japonica 원연교잡으로 육성한 통일형품종 2품종(삼강, 칠성)을 공시 하여 광합성 및 물질생산특성과 이와 관련된 주요 생리적특성을 구명코져 온도와 광도 조건을 달리하여 생육특기별로 실험한 결과 그 개요를 들어보면 다음과 같다. 2. 유묘기에 있어서도 통일형 품종은 일반형품종에 비하여 저온에서 광합성능력이 저하되나 상온에서는 오히려 높았다. 3. 저온에 의한 호흡율의 저하는 유묘기, 분얼기 모두 품종간 차이는 적으나 유묘기보다 분얼기에 저하정도가 큰 특징을 보였다. 4. 생육단계별 specific leaf area는 품종간에 큰 차이없이 분얼기가 가장 높고 유수변화기에서 출수기에 갈수록 높아지는 특성을 보였다. 5. 출수기의 광합성능력은 7KLx의 저광도에서는 일반형품종이 통일형품종 보다 조해도가 낮으나 60KLx의 광도하에서는 통일성품종이 높았으며 특히 2위엽에서 높은 특성을 보였다. 6. 출수기의 엽위별 광합성에 호흡율(R/P$\times$100)은 3위엽에서 현저히 높았고 품종간에도 그경향은 일정하였다. 7. CGR는 전반적으로 통일형품종이 일반형품종에 비하여 높았고 RGR는 품종간에 대차가 없었으나 NAR는 통일형인 삼강에서 현저히 높았다. 8. 통일형품종이 일반형품종에 비하여 1수영화수 및 주당 정조중도 많았고 수확지수도 높은 특성을 보여 주었다.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.826-832
• /
• 1998

In order to understand the influences of wearing clothings with different thermal insula-tions when men were exposed from $25^{\circ}C$ environment to 18$^{\circ}C$ environment, thermoregulatory responses were measured on 4 healthy female college students. Subjects rested wearing T-shirts, trousers, and socks called LC(total weight 541g) at 25$\pm$1$^{\circ}C$, 50$\pm$5% R.H. and then exposed to the room conditioned in 18$\pm$1$^{\circ}C$, 50$\pm$5$^{\circ}C$ R.H. with LC as it was(LC Type) or with T-shirts, trousers, socks, training wear upper garment, the training wear lower garment called HC (total weight 1368g)(HC Type) for 120 min. The results can be summarized as follows: 1) When subjects were exposed from $25^{\circ}C$ environment to 18$^{\circ}C$ environment, decrease of rectal temperature was significantly smaller in LC Type than in HC Type. 2)Increase of heat production and weight loss had no significant difference between two types of clothing. 3)Internal thermal conductance was higher in HC Type and external thermal conductance was higher in LC Type. Therefore total thermal conductance was higher in LC Type than in HC Type. 4)Decrease of skin temperature was greater in LC Type than in HC Type. 5)Subjects felt colder with LC Type than with HC Type, but did not feel differently in comfort sensation between two types of clothing. It was suggested that less decrease of rectal temperature in LC type inspite of more dry heat loss from body might be ascribed to a shift of blood from the shell area to the core area originating in the vasoconstriction and the lowered internal thermal conductance. In conclu-sion, the importance of the state of internal heat distribution in the homeostasis seemed to be reaffirmed.

• 전자공학회논문지 IE
• /
• 제47권2호
• /
• pp.32-37
• /
• 2010

본 연구에서는 초소형화의 욕구와 우수한 신뢰성을 가진 일체형 SMD 인덕터 코어를 개발하기 위하여 전력값에 따른 온도 특성을 분석하였다. 전자부품의 온도가 상승하면 소자의 정상적인 동작을 보장하기 힘든 기능적 장애를 가져오고, 부품의 고장율을 높여 수명을 단축하게 된다. 또한, 열응력이나 열팽창에 의하여 부품에 충격을 주고 오동작을 일으키게 되어 신뢰성에 많은 영향을 미치게 된다. 일체형 SMD Inductor Core를 주위온도와 소자온도 차에 의한 온도상승을 측정하였으며, 각 전력값에 따른 온도 특성을 통해서 안정된 전력값을 얻을 수 있었고, 측정된 직류 전류와 저항 $R_dc$를 이용하여 시뮬레이션한 결과 40[$^{\circ}C$]의 온도 상승분에서 양호한 정격 전류값을 찾을 수 있었다.

• Architectural research
• /
• 제10권1호
• /
• pp.33-39
• /
• 2008

Condensation has mainly occurred in corridor type apartment door which is exposed to the outside air and is made of steel, which has high thermal conductivity. As a result, the total costs of repair have increased with the number of disputes with residents. In this study, therefore, we investigate materials and construction methods used in apartment door, perform a computer simulation to find out possible improvements, and then suggest the dew point to prevent the occurrence of condensation throughout simulation. The results indicate that the temperature that condensation does not occur is $15.4^{\circ}C$, and the optimum method of achieving this dew point is shown to be a door frame system including a large vertical slot to decrease the area of thermal conduction between the outer and inner portions of the door frame. Mock-up tests show that the surface temperature of the door frame was higher than the dew point, and the system can withstand severe cold conditions of $-20^{\circ}C$. In application test, the surface temperature of door frame with vertical slots is $5.9^{\circ}C$in average, which is higher than the existing door frame. Furthermore, in the temperature distribution of the surrounding door measured with infrared ray camera, the existing door shows the high temperature distribution indicating lack of insulation, but the improved door shows the low temperature distribution indicating higher insulation.

• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.71-74
• /
• 2012

물체에서 방사되는 열잡음 신호를 수신하여 증폭하고 검파회로를 거쳐 DC전압으로 출력하는 35GHz 대역의 근거리 디케형(Dicke type) 복사계를 제작하고, 복사계의 온도 보정과 그 특성을 소개한다. 또한 이를 이용하여 특정 물체의 밀리미터파 방사에너지를 측정하기 위한 온도보정에 관한 연구를 수행 하였다. 온도범위 299K ~ 309K에서 온도 증가에 따른 밀리미터파 복사계의 출력전압은 선형적이었으며, 이 범위의 온도에서 미지의 흑체 복사에너지의 상대적인 양을 밀리미터파 복사계를 이용하여 측정이 가능하다. 실험한 온도 범위에서 온도와 출력전압과의 관계는 V=0.03601K - 10.70517 을 얻었다.