• 대한한방체열의학회지
• /
• 제6권1호
• /
• pp.32-38
• /
• 2008

Objective: To investigate the changes of facial temperature by Miso Facial Rejuvenation Acupuncture treatment. Methods: One middle-aged women who has no other disease was recruited. The Miso Facial Rejuvenation Acupuncture was performed on only right face. We measured the facial temperature using the Digital Infrared Thermal Imaging (DOREX Inc. Spectrum 9000 MB, USA, D.I.T.I.) before, immediate after and 10 minutes after treatment. And we used the Wilcoxon signed rank test (P<0.05) to compare the difference of facial temperature at each time. Results: Right facial temperature (the area treated by acpuncuture) increased immediately from $30.02{\pm}1.87^{\circ}C$ to $32.24{\pm}1.03^{\circ}C$, the change of temperature is statistically significant. At 10 minutes after treatment, right facial temperature decreased little, but there was no statistical significance. Left facial temperature increased little, but there was no statistical significance. The difference between right and left face increased after Miso facial rejuvenation acupuncture treatment. Conclusion: Miso facial rejuvenation acupuncture could make the facial temperature increase.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.525-533
• /
• 1996

Chemical characteristics of the industrial wastewater sludge, degradation of the sludge in soil and CO2 generation and changes of nitrogen in soil treated with the sludge were investigated. The results obtained were summarized as follows: 1. Degradation rate of the sludge in soil was 26% at natural temperature, and 33% at incubation temperature at 12 weeks after treatment. 2. T-C, T-N and the C/N ratio of sludge in soil was 16.0%, 0.63% and 26, respectively, at natural temperature, and 15.0%, 0, 65% and 23, respectively, at incubation temperature at 12 weeks after treatment. 3, Camulative CO2 generation in soil treated with l%, 3% and 5% of sludge was 284, 440 and 512 mg/100 g, respectively, at natural temperature, and 440, 558 g and 654 mg/100g, respectively, at incubation temperature at 12 weeks after treatment. 4, Changes of :norganic nitrogen in soil treated with l%, 3% and 5% of sludge were 7.8, 12.8 and 16.3 mg/100g, respectively, at incubation temperature at 12 weeks after treatment. Mineralization ratio of organic nitrogen in soil treated with 1%, 3% and 5% of sludge was 10.7%, 13.6% and 15.2%, respectively, at incubation temperature at 12 weeks after treatment. 5. Chanties of pH in soil treated with 1%, 3% and 5% of Industrial wastewater sludge were in the range of 6.7~7, 5 at natural temperature, and 6.1~7.9 at incubation temperature at 12 weeks after treatment.

• 한국작물학회지
• /
• 제38권4호
• /
• pp.330-335
• /
• 1993

참깨품종의 온도와 일장에 따른 항산화성분 함률차이를 조사하여 참깨 재배기술개선에 필요한 기초자료를 얻고자 무분지형 단백깨와 수원깨 및 분지형 안산깨와 한섬깨를 공시하여 작물시험장 인공기상실에서 온도와 일장을 달리 처리하여 시험하였던 바 얻어진 결과를 요약하면 다음과 같다. 1. 일장과 온도처리에 따른 참깨 항산화함량의 품종간 차이가 있었다. 2. 온도의 차이에 따라 20/15$^{\circ}C(주간온도/연간온도)에서 sesamin 0.22%, sesamolin 0.16% 인데 비하여 30/25$^{\circ}C에서는 sesamin 0.28%, sesamolin 0.19%를 보여 저온조건 보다는 고온조건에서 항산화 성분함량이 높았다. 3. 일장의 차이에 따라 11시간 일장에서 sesamin 0.24%, sesamin 0.26%, sesamolin 0.20%와 큰 차이가 없었다. 4. 따라서 참깨 항산화성분 함량은 일장의 길이보다는 온도의 차이에 의해 크게 영향 받는 것으로 생각된다.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1047-1054
• /
• 2018

This paper proposed the strategies for controlling both the heater temperature and the output voltage of a single-phase inverter for the heat treatment. The single-phase inverter system for the heat treatment controls the heater temperature to its reference one, and also it limits the inverter output voltage to 60 V for safety. The stability may be deteriorated due to the large time constant difference between the heater temperature and inverter output voltage. In order to ensure the stability, a hysteresis on/off control approach for the heater temperature control is adapted, and both the open-loop and the closed-loop control strategies of the output voltage are suggested. The performances for the proposed strategies are demonstrated with the experiments.

• 한국환경과학회지
• /
• 제27권4호
• /
• pp.251-259
• /
• 2018

This study was conducted to determine the effects of combination of air temperature and soil water content on the growth, physiological disorder rate, and yield of hot peppers. The study was carried out in a typical plastic house (open on one side and with ventilation fans on the other side), which was maintained with gradient air temperature (maximum difference in air temperature: $6^{\circ}C$). The deficit irrigation (DI) treatment commenced 65 days after transplanting. The height of plant and fresh and dry weights of the stem increased at high air temperature (ambient + $6^{\circ}C$, extreme high temperature; EHT). Furthermore, the leaf area decreased significantly with the DI treatment. There were no significant differences in the stem diameter, number of branches, and fresh and dry weights of the leaves among all the treatments. The net photosynthesis rate of the full irrigation (FI) treatment was higher than that of the DI treatment. The photosynthesis rate at ambient air temperature was $19.7{\mu}mol\;CO_2m^{-2}{\cdot}s^{-1}$, the highest among all the treatments; however, the photosynthesis rate of the EHT treatment decreased by 60% ($12.3{\mu}mol\;CO_2m^{-2}{\cdot}s^{-1}$). Additionally, the formation of guard cells in the leaf was abnormal with the EHT treatment, and there was a decrease in translocation efficiency. The effects of air temperature treatment were more pronounced on the physiological disorder rate and yield. The physiological disorder rate of the EHT treatment was the highest under the DI treatment condition. The yield of the AFI (ambient air temperature with full irrigation) treatment was 3,771 kg/10a, the highest among all the treatments; however, the yield of the EHT treatment with DI and FI was 1,282 and 1,327 kg/10a, respectively. These results indicate that growth and physiological disorder rate improved with the EHT treatment; however, there was a decrease in yield. Furthermore, the formation of guard cells was abnormal and malfunctional.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.908-916
• /
• 1991

The characteristics of the carbonized and calcined products made from coal tar pitch coke and coal tar pitch, were investigated in the aspect of the manufacture of isotropic graphite with high density. The mesophase from the pitch was rapidly formed at higher heat-treatment temperature between 410$^{\circ}C$ and 450$^{\circ}C$, where the insolubes in the pitch accelerated the rate of nucleation and growth of the mesophase. The benzene insolubles and the quinoline insolubes were increased as the heat treatment temperature and the heat-treatment time increased. The ratio of benzene insolubles and quinoline solubles (BI/QS) was decreased as the heat-treatment temperature was higher and maintained to be nearly constant regardless of heat-treatment time at fixed heat treatment temperature. The bulk density of the calcined carbon was linearly proportional to the ratio of quinoline solubes to volatile matter in the green coke. Anisotropic ratio of electrical resistance was measured to be between 0.98 and 1.10.

• Journal of Dairy Science and Biotechnology
• /
• 제38권4호
• /
• pp.230-236
• /
• 2020

Heat treatment is a fundamental processing technology in the dairy industry. The main purpose of heat treatment is to destroy pathogenic and spoilage promoting microorganisms to ensure milk safety and shelf life. Despite the development of alternative technologies, such as high-pressure processing and pulse field technology for microbial destruction, heat treatment is widely used in the dairy industry and in other food processes to destroy microorganisms. Heat treatment has contributed greatly to the success of food preservation since Pasteur's early discovery that heat treatment of wine and beer could prevent their deterioration, and since the introduction of milk pasteurization in the 1890s. In Korea, food labeling standards do not stratify heat treatments into low temperature, high temperature, and ultra-high temperature methods. Most milk is produced in Korea by pasteurization, with extended shelf life (ESL : 125--140℃ / 1-10 s). Classification based on temperature (i.e. low, high, and ultra-high), is meaningless.

• 한국작물학회지
• /
• 제42권2호
• /
• pp.196-201
• /
• 1997

참당귀 묘크기와 저온처리가 추대에 미치는 영향을 알아보고자 수행한 시험결과를 요약하며 다음과 같다. 1. 저온처리 기간에 따른 추대율은 30일, 60일과 90일 처리에서는 각각 69.4％, 69.3％과 75.2％로 처리기간이 길어짐에 따라 추대율이 높았으며, 무처리에서는 29.6％로 낮았다. 2. 묘크기별 저온처리에 따른 추대율은 소묘일수록 낮고, 대묘일수록 높아지는 경향이었다. 정식후 추대까지의 기간은 저온처리 기간이 길수록, 대묘일수록 추대가 빨라지는 경향이었다. 3. 추대시 생육은 저온처리 기간이 길어지고 대묘일수록 초장이 짧고 추대엽위가 낮으며 진전엽수가 적어지는 경향이었다. 추대율은 추대시 생육과는 부의 상관을 보이고, 후기생육과는 정의 상관을 보였다.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.13-19
• /
• 2017

The effect of heat treatment temperature (HTT) on the mechanical properties of polyacrylonitrile (PAN)-based carbon fiber had been investigated. The heat treatment on the carbon fiber was conducted under high vacuum atmosphere of $10^{-6}mmHg$, and the range of temperature of $1,000^{\circ}C$ to $2,000^{\circ}C$. As a results, The tensile strength of carbon fiber and carbon fiber composites showed increasing tendency with the rise of heat treatment temperature. And, the shape parameter of Weibull distribution for the strength of carbon single fiber showed an increasing trend until $1,800^{\circ}C$. But the shape parameter of Weibull distribution for the strength of carbon fiber composites showed no clear tendency with the rise of heat treatment temperature. The cause of reinforcement effect of the carbon fiber by the heat treatment was regarded as the carbonization of carbon single fiber.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.288-297
• /
• 2019

The specimens were heat treated at 180℃, 190℃, 200℃, 210℃ and 220℃ to observe the change of the physical properties of the double raschel pile fabric. The density, tensile strength, weight, elongation, dyeing characteristics, fabric surface morphology and cross sectional shape were observed by heat treatment temperature. Compared with untreated samples, weight, density and tensile strength were increased with increasing heat treatment temperature. No increase was observed at 220℃. In the case of elongation, it increased to 190℃ but thereafter it could not be observed. In the case of uprightness of brushed hair, it was observed that the gap between the yarns was narrowed and the density was increased and the straightness of the yarn and pile yarn was improved by widening the heat treatment temperature. As a result, it was observed that the uprightness was remarkably improved and the bulky properties was increased. It was also observed that the increase of the dyeability was observed with increasing the heat treatment temperature.