• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.11-18
• /
• 2004

A solar concentrator, named KIERDISH II, was built at KIER in order to investigate the feasibility of high temperature solar energy application system. The constructed concentrator is a dish type solar concentrator with a focal length of 4.68m and a diameter of 7.9m. To successfully operate KIERDISH II, optimal design of the absorber is very important and flux density distribution has to be known. The focal flux density distribution on the receiver was measured. We have observed the shape and size of flux images and evaluated percent power within radius. Flux density distribution is usually measured by a CCD(charge coupled device) camera and a radiometer. In this paper we present a flux mapping method to estimate the characteristic features of the flux density distribution in the focal region of solar concentrator. The minimum radius of receiver is found to be 0.15m and approximately 90% of the incident radiation is intercepted by receiver aperture.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.13-13
• /
• 2017

By the progress of genome sequencing, infrastructures for marker-assisted breeding (MAB) of rice came to be established. Fine mapping and gene isolation have been conducted using the breeding materials derived from natural variations and artificial mutants. Such genetic analysis by the genome-wide dense markers provided us the knowledge about the many genes controlling important traits. We identified several genes or quantitative trait loci (QTL) for heading date, blast resistance, eating quality, high-temperature stress tolerance, and so on. NILs of each gene controlling heading date contribute to elongate the rice harvest period. Determination of precise gene location of blast resistance gene pi21, allowed us to overcome linkage drag, co-introduction of undesirable eating quality. We could also breed the first practical rice cultivar in Japan with a brown planthopper resistance gene bph11 in the genetic back-ground of an elite cultivar. Discovery of major and minor QTLs for good eating quality allowed us to fine-tune of eating quality according to the rice planting area or usage of rice grain. Many rice cultivars have bred efficiently by MAB for several traits, or by marker-assisted backcross breeding through chromosome segment substitution lines (CSSLs) using genetically diverse accessions. We are also systematically supporting the crop breeding of other sectors by MAB or by providing resources such as CSSLs. It is possible to pyramid many genes for important traits by using MAB, but is still difficult to improve the yielding ability. We are performing a Genomic Selection (GS) for improvement of rice biomass and grain yield. We are also trying to apply the genome editing technology for high yield rice breeding.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.33.1-33.1
• /
• 2017

Molecular clouds are the sites of stellar birth, and conditions within the clouds control the mode and tempo of star formation. In particular, turbulence largely determines the density and velocity fields, and can affect the gas kinetic temperature as it decays via shocks. However, despite its central role in star formation and many years of study, the properties of turbulence remain poorly understood. As a part of the TRAO key science program, "Mapping turbulent properties of star-forming molecular clouds down to the sonic scale (PI: Jeong-Eun Lee)", we mapped the northern region of the Orion A molecular cloud and the L1688 region of the ${\rho}$ Ophiuchus molecular cloud in 2 sets of lines (13CO 1-0/C18O 1-0 and HCN 1-0/and HCO+ 1-0) using the Taeduk Radio Astronomy Observatory (TRAO) 14-m telescope. We analyze these maps using a python package 'Turbustat', a toolkit which contains 16 different turbulent statistics. We will present the preliminary results of our TRAO observations and various turbulence statistical analyses.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.71-74
• /
• 2014

Cancer-related facial pain refractory to pharmacologic management or nondestructive means is a major indication for destructive pain surgery. Stereotactic mesencephalotomy can be a valuable procedure in the management of cancer pain involving the upper extremities or the face, with the assistance of magnetic resonance imaging (MRI) and electrophysiologic mapping. A 72-year-old man presented with a 3-year history of intractable left-sided facial pain. When pharmacologic and nondestructive measures failed to provide pain alleviation, he was reexamined and diagnosed with inoperable hard palate cancer with intracranial extension. During the concurrent chemoradiation treatment, his cancer-related facial pain was aggravated and became medically intractable. After careful consideration, MRI-based stereotactic mesencephalotomy was performed at a point 5 mm behind the posterior commissure, 6 mm lateral to and 5 mm below the intercommissural plane using a 2-mm electrode, with the temperature of the electrode raised to $80^{\circ}C$ for 60 seconds. Up until now, the pain has been relatively well-controlled by intermittent intraventricular morphine injection and oral opioids, with the pain level remaining at visual analogue scale 4 or 5. Stereotactic mesencephalotomy with the use of high-resolution MRI and electrophysiologic localization is a valuable procedure in patients with cancer-related facial pain.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.376-386
• /
• 2014

Zinc oxysulfide nanocrystals (ZnOS NCs) were synthesized by forming ZnS phase on a ZnO matrix. ZnO nanocrystals (NCs) with a diameter of 10 nm were synthesized by forced hydrolysis in an organic solvent. As-synthesized ZnO NCs aggregated with each other due to the high surface energy. As acetic acid (AA) was added into the milky suspension of the aggregated ZnO NCs, transparent solution of well dispersed ZnO NCs formed. Finally ZnOS NCs were formed by adding thioacetic acid (TAA) to the transparent solution. The effect of recrystallization on the structural, optical and electrical properties of the ZnOS NCs were studied. The results of UV-vis absorption confirmed the band gap tunability caused by increasing the curing temperature of ZnOS thin films. This may have originated from the larger effective size due to the recrystallization of zinc sulfide (ZnS). From XRD result we identified that ZnOS thin films have a zinc blende crystal structure of ZnS without wurtzite ZnO structure. This is probably due to the small amount of ZnO phases. These assertions were verified through EDS of FE-SEM, XPS and EDS mapping of HR-TEM results; we clearly proved that ZnOS were comprised of ZnS and ZnO phases.

• Microbiology and Biotechnology Letters
• /
• v.22 no.5
• /
• pp.485-490
• /
• 1994

A restriction endonuclease, PsyI, has been isolated from Pseudomonas syringae pv. pha- seolicola, and its catalytic properties have been studied. This enzyme was purified through strepto- mycin sulfate and ammonium sulfate fractionation, phosphocellulose Pll, DEAE-cellulose, hydroxy- apatite and Sephadex G-100 column chromatography. It's molecular weight was about 50,000 dalton as determined by 7.5% polyacrylamide gel electrophoresis containing 0.1% SDS. In catalytic proper- ties, PsyI shows stable at wide ranges of pH between 7.0 and 10.0, of temperature between 30$\circ$C and 37$\circ$C, and its thermal stability is between 25$\circ$C, and 45$\circ$C, at the presence Of 10 mM MgCl$_{2}$-PsyI essentially require Na salt for enzyme reaction, is rather inhibited in the high Na salt concent- ration. The presence of 2-mercaptoethanol is absolutely required for the enzyme activity. This endonuclease, PsyI was determined to be an isoschizomer of SalI from the results of the restriction mapping and DNA sequencing.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.76-81
• /
• 2016

We performed a molecular marker-based analysis of quantitative trait loci for traits that determine the quality of appearance of grains using 120 doubled haploid lines developed by anther culture from the F1 cross between 'Cheongcheong' (Oryza sativa L. ssp. Indica) and 'Nagdong' (Oryza sativa L. ssp. Japonica). We therefore calculated the alkali digestion value (ADV), used to indirectly measure gelatinization temperature, to evaluate the quality of cooked rice in 2013 and 2014. The ADV score of frequency distribution was higher milled rice than brown rice. In total, nine different quantitative trait loci (QTLs) were found on 5 chromosomes in 2013 and 2014. Also, chromosome 5, 8 were detected over two years. We conclude that selected molecular markers from this QTL analysis could be exploited in future rice quality. In conclusion, we investigated ADV of brown and milled rice in CNDH population. This study found nine QTLs related to the ADV of brown and milled rice. The detected one marker can be used to select lines with desirable eating-quality traits because ADV is closely associated with the eating quality of cooked rice. Therefore, it will be useful to collect resources and distinguishable in many varieties for rice breeding program.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.643-651
• /
• 2015

Multi-axis magnetic and accelerometer sensor are widely used in consumer product such as smart phones. The vector output of multi-axis sensors have errors on each axis such as offset error, scale error, non-orthogonality. These errors cause many problems on the performance of the applications. In this paper, we designed the effective inline compensation algorithm for calibrating of 3 axis sensors using ellipsoid for mass production of multi-axis sensors. The outputs with those kinds of errors can be modeled by ellipsoid, and the proposed algorithm makes sequential mappings of the virtual ellipsoid to perfect sphere which is calibrated function of the sensor on three-dimensional space. The proposed calibrating process composed of four main stages and is very straightforward and effective. In addition, another imperfection of the sensor such as the drift from temperature can be easily inserted in each mapping stage. Numerical simulation and experimental results shows great performance of the proposed compensation algorithm.

• Journal of Microbiology
• /
• v.34 no.1
• /
• pp.15-22
• /
• 1996

The cloned X-bacterial gene (groEx) which is analogous to groE of E. Coli strongly expressed in E. coli when grown at the temperature 27.deg. C or higher without having to add any inducers. By S1-nuclease mapping, primer extension analysis and site directed mutagenesis, we found 4 promoters in the gene. Among them two promoters located at 5'-extended region of the gene are homologous to the promoters found in groE family of heat-shock genes ; they are , .sigma.$^{32}$ factor-dependent P1 promotor and .delta$^{70}$factor-dependet P2 promoter. The other two promoters found within the coding region of groESx were P3, 5'-TTGGCG-(18 bases)-AATACT-3' and P4, 5'-TTGGCA-(19 bases)-TAAGT which overlapped within 49 bases. These unique intragenic .delta.$^{70}$-dependent promoters are the first to be cloned and characterized in groE analogous heat-shock genes so far. These P3 and P4 promoters appeared to be responsible for the strong expression of GroElx in X-bacteria in vivo.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.107.1-107.1
• /
• 2012

Because of beautiful glossy and color, the value of gold leverage is very high in Europe. For improve the quality of white gold, we performed heat treatment on 14K white gold alloys at various age-hardening conditions. Age-hardening behavior and the related phase transformation changes were studied to elucidate the hardening mechanism of 14K white gold alloys. For solid solution treatment [ST], casted 14K white gold alloy specimens were treated at high temperature ($750^{\circ}C$) during 30 minute, and the specimens dropped to water for quenching immediately. For Age-hardening treatment [AT], the specimens were treated at various temperatures ($250^{\circ}C{\sim}300^{\circ}C$). After the heat treatment, we observed increased hardness from 144 Hv to 214 Hv by Vicker's hardness tester. Variation of the grain size measured by optical microscopy (OM) and scanning electron microscopy (SEM) images. By electron probe micro-analysis (EPMA) mapping analysis, we investigated that irregular particles were changed uniformly. After heat treatment, 14K white gold alloys showed improved hardness and became uniformity of grain size by age-hardening treatment.