• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.852-857
• /
• 1990

The rheological properties and food functionality of the novel sugar derivatives, fructo-oligosaccharide, high maltose syrup(HMS), maltitol and sorbitol were examined and compared to those of sucrose. All samples tested showed Newtonian fluid property at the concentration range of 10% to the original concentrated products containing $69{\sim}81%w/w$ solid. HMS showed the highest viscosity. The viscosity increased(r=0.8038) as the average molecular weight of sugar derivatives were increased. The viscosity increased exponentially as the concentration increased, and sugar alcohols had lower value of the exponent compared to HMS and fructo-oligosaccharide. The viscosity of sugar derivatives solutions decreased by the increasing temperature following the Arrhenius equation. The flow activation energies of sorbitol and HMS were higer than that of sucrose. Substitution of sucrose with fructo-oligosaccharide in apple jam processing did not change the textural characteristics, but in redbean jelly(yanggaeng) it reduced the hardness, adhesiveness, springiness and cohesiveness. When sucrose was 100% replaced by HMS, the texture of apple jam and redbean jelly was not changed, but by mixing sucrose and HMS 1 : 1 ratio, the hardness decreased substantially The sugar alcohols reduced the hardness, adhesiveness, springiness of apple jam and redbean jelly significantly. Addition of fructo-oligosaccharide and HMS to sucrose did not influence the solidifying rate of candy, but sorbitol, even at 10% addition, retarded the candy moulding.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.496-502
• /
• 2004

Purified acorn starch was obtained from alkali precipitation method. Acorn amylose and acorn amylopectin were fractionated from purified acorn starch by butanol improvement method. Gel permeation chromatography (GPC) was used to measure molecular weight distribution of acorn starch, acorn amylose, acorn amylopectin and corn starch, corn amylose, corn amylopectin. GPC measurement diagrams were obtained by each retention time. And then, we used DMSO and DMF as solvent, pullulan as standard material. We calculated the Number-average molar mass (Mn), Weight-average molar mass (Mw) and polydispersity from molecular weight distribution of each sample. As a result of estimating molecular weight using GPC, Mw of amylose has small value than Mw of amylopectin. From this fact, the molecular structural aspects of amylose and amylopectin were predicted and it was in good agrement with the tendency of polydispersity by GPC. The polydispersity of starch had big value than amylose and amylopectin, from this result, it might be known that the range of molecular weight appeared broad by heterogeneous properties of two components. The viscosity of purified acorn starch, amylose, amylopectin seperated from acorn starch, was decreased by increasing the shear rate and raising the temperature exponentially. Acorn starch solutions exhibited pseudoplastic power law fluid behavior.

• Journal of Life Science
• /
• v.21 no.4
• /
• pp.554-560
• /
• 2011

This study was performed to investigate the effects of microbial augmentation on the biological treatment of paper mill wastewater. Three bacteria (KN11, KN13, KN27) capable of degrading aromatic compounds and a bacterial strain (GT21) producing an extracellular cellulase were isolated from soil and wastewater by selective enrichment culture. Through morphological, physiological, and biochemical taxonomies, isolated strains of KN11, KN13, KN27, and GT21 were identified as Acinetobacter sp., Neisseria sp., Bacillus sp., and Pseudomonas sp. and named Acinetobacter sp. KN11, Neisseria sp. KN13, Bacillus sp. KN27, and Pseudomonas sp. GT21, respectively. For analysis of non-biodegradable and chemical oxygen demand (COD)-increasing matter in a paper mill wastewater, we utilized GC/MS to detect aromatic compounds and their derivatives containing several substituted functional groups. The microbial augmentation, J30 formulated with the mixture of bacteria including Acinetobacter sp. KN11, Neisseria sp. KN13, Bacillus sp. KN27, and Pseudomonas sp. GT21, was used for the treatment of paper mill wastewater. The optimum temperature and pH for COD removal of the microbial augmentation, J30, were $30^{\circ}C$ and 7.5, respectively. For evaluation of the industrial applicability of the microbial augmentation, J30 in the pilot test, treatment efficiency was examined using paper mill wastewater. The microbial augmentation, J30, showed a COD removal rate of 87%. On the basis of the above results, we designed the wastewater treatment process of the activated sludge system.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.939-946
• /
• 1997

Effects of moisture content on the gelatinization and recrystallization of non-waxy and waxy rice starch gels were investigated by differential scanning calorimetry (DSC). The recrystallization rates of the starch gels containing various moisture contents $(40{\sim}70%)$ were analyzed by Avrami equation. The waxy rice starch had higher gelatinization temperature and enthalpy than non-waxy one. The highest degrees of recrystallization in both rice starch gels stored at $4^{\circ}C$ were shown at 40%, and recrystallizations above 80% moisture content were not found. The degree of recrystallization of waxy one was higher than that of non-waxy one in the range of 40 to 60% moisture content. The Avrami exponents (n) of both rice starch gels were near to 1.0 and the time constant (1/k) was increased with increasing moisture content in the range of 40 to 70% moisture content. The recrystallization rate of waxy rice starch gel was slower than that of non-waxy one. The recrystallization of rice starch gels could be explained by the change of ice melting enthalpy during storage. The Wg's, represented the maximum practical amount of plasticizing water, were about 29.9% and 28.2% for non-waxy and waxy rice starch gels, respectively.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1016-1020
• /
• 1997

Treatments of irradiation alone and/or in combination with heat were investigated for the sterilization of Escherichia coli O157: H7. D values of the strain were 129.2 min at $50^{\circ}C$, 27.1 min at $55^{\circ}C$, and 2.4 min at $60^{\circ}C$. The survival effect of E. coli O157:H7 during heating at various media was investigated. On heating at temperature of $60^{\circ}C$ for 10 min, the strain was generally more resistant in the media containg such chemical substrates such as 0.03 M cysteine, 1% sodium citrate or 5% sucrose, whereas this strain was appeared weaker in the chemical substrates added group such as 1% meat extract, 1% casein or 1% casamino acid. In the case of irradiation alone, $D_{10}$ value of E. coli O157:H7 was 0.116 kGy, and inactivation factors were $17{\sim}25$ at doses of 2 to 3 kGy. Pre-and post-irradiation heating showed the same $D_{10}$ value about 0.07 kGy. And Inactivation factors were $25{\sim}41$ at doses of 2 to 3 kGy. Therefore, combination treatment with heat and irradiation significantly increased in inactivation rate by increasing radiation sensitivity of E. coli O157:H7.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.316-323
• /
• 1992

Studies on the changes in rheological properties, molecular weight distribution and dextran yield after being reacted in lO%(w/w) sucrose concentration were performed with crude dextransucrase produced from Leuconostoc mesenteroides isolated from Sikhae. The reaction rate of dextran formation was monitored by sugar analysis with HPLC and by the changes in apparent viscosity. According to the periodate oxidation test, the dextran produced in this experiment was estimated to have 89% $\alpha$-(1->6) main linkages and 11% $\alpha$-(1->) side linkages. The rheological properties of the dextran solution formed changed with reaction time, and it was related to the changes in molecular weight distribution of dextran as determined by GPC analysis. As the reaction proceeded, the rheological behavior changed from Newtonian to non-Newtonian, showing Binghampseudoplastic and thixothropic flow behavior. The apparent viscosity of dextran formed solution increased with increasing reaction time, reached a maximum value of 2680 cP ($\gamma$=$33.75s^{-1}$, $25^{\circ}C$) by enzyme reaction for 8 hours, and then decreased. The temperature dependency of dextran formed solutions was well expressed by the Arrhenius equation and the activation energy reached a maximum value of 1.69 kcal/mole by enzyme reaction for 8 hours.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.54-59
• /
• 1992

The characteristics of endogenous and exogenous ${\beta}-galactosidase\;({\beta}-Galase)$ produced from L. acidophilus were investigated as one of the serial studies on the fermentation of Chinese cabbage kimchi using L. acidophilus. Apparent molecular weight of endogenous and exogenous of the ${\beta}-Galase$ were investigated to be 550,000 and 740,000 daltons by the method of gel filtration and Km values of the both enzymes were 1.67mg/ml, 1.33mg/ml and $V_{max}$ were $8.5\;{\mu}\;mol/mg/30min.$, $2.65\;{\mu}\;mol/ml/30min.$, respectively. The optimum pH of the enzymes were 7 and 8, respectively. The optimum temperatures and salt concentrations of the both enzyme were the same and appeared to $30^{\circ}C$and$4{\sim}5%$, respectively. The activities of the endogenous and exogenous ${\beta}-Galase$ were decreased by increasing of temperature from $60^{\circ}C$to$90^{\circ}C$ and the decreasing rate of the enzyme activities on the processing of the heating times showed high at first 2 minutes of heating.

• Korean Journal of Agricultural Science
• /
• v.28 no.1
• /
• pp.18-26
• /
• 2001

Application of the Asian ladybird (Harmonia axyridis) to control several species of aphids in the plastic green houses in mind, control effects of aphid populations regulated by the Asian ladybird were observed. The green peach aphid, the turnip aphid, and the cotton aphid were present on mustard plants, Angelia utlis, ornamental kales, and egg plants at greenhouses in spring, summer, and winter. Adults and larvae of the Asian ladybird used in experiments were collected from aggregated sites at Taejon in the autumn and reared on the cotton aphid in the laboratory. In winter, more number of adults and larvae of ladybirds than in other seasons were needed to control aphid population in successively double plastic greenhouses with supplied subterranean water for keeping warmth. In spring and summer, it was possible to keep the aphid populations low when necessary by manipulating ladybird populations according to the density of aphids. On the other hand, the innate increasing rate of aphid, the aphid population density at the time of applying ladybird, the predacious ability of ladybird at specific developmental stages, and needed periods should be taken into account to control aphids. In addition, the environmental factors, for example, optimum temperature and humidity should be considered to be biologically effective when ladybirds are released to greenhouses.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.145-152
• /
• 2006

Predation of Neoseiulus fallacis was observed for biological control of Panonychus citri that is one of the major insect pests on citrus. The daily predation of development stages of P. citri by an adult female of N. fallacis were 20.1 eggs, 26.1 larvae, 18.2 protonymphs, and 7.4 deutonymphs at 25$^{\circ}C$, The daily predation of P. citri eggs by N, fallacis was observed under different temperatures. The predation was increased as the temperature rise. At this time, ratio of eggs production of l! fallacis after predation of P. citri eggs (number of eggs N. fallacis/number of eggs P. citri consumed by N. fallacis) was 0.09. The daily predation of P. citri eggs by N, fallacis was 21.1, 17.3, and 16.7 on the different arenas (diameter: 20, 40, and 60 mm), respectively. The predation was decreased as the arena of the leaf increase. The functional response of M fallacis to P. citri showed Holling's Type II response: the consumption of prey by N. fallacis increased as the density of prey increase but increasing rate was gradually reduced. As the result, it seemed that N. fallacis can be use for biological control of P. citri.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.356-362
• /
• 2018

Hot pepper is a kind of seasoning vegetables, which is a major item in the Korean vegetable market. Since the use of hot pepper is processed into pepper powder, which is a powder form of dried hot pepper, improvement of quality and productivity of dried hot pepper is important. Therefore, this experiment was conducted to suggest proper drying method by comparing the changes of hot pepper powder ingredients considering production cost according to the drying method. As a drying method, we used sun drying and heat drying which are widely used in practice. We also compared the productivity and quality of dried hot pepper by applying a dehumidifying drying method using a dehumidifier. Drying rate of hot pepper was highest of 85.1% at heat drying. Accordingly moisture content of hot pepper powder was lowest of 13.5% at heat drying. The American Spice Trade Association (ASTA) color value, which influenced the coloring of red pepper, showed higher in heat drying and dehumidified drying treatment than the sun drying treatment. The content of capsaicinoids was higher at sun drying treatment than that of at both heat drying and dehumidified drying treatments. The content of sugar was higher at heat drying and dehumidified drying treatment where drying time was relatively short than that of sun drying treatment. Also, there was no significant difference in sugar content between the two treatments. The production cost of dried hot pepper with dehumidified drying was 9.9% more efficient than heat drying. Through this study, it was found that heat and dehumidified drying method were effective in increasing sugar content and coloring of hot pepper powder. In order to improve the capsaicinoid content of red pepper, it is considered that appropriate drying temperature and drying time should be added in the process of heat drying and dehumidified drying.