• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.461-465
• /
• 1996

Position and rate control modes arc the two common modes for controlling remote manipulators with joysticks or hand controllers. Generally, position mode is easier for teleoperation than rate modes, when the manipulation work space is small or comparable to the human operator's control space. When the telemanipulator's work space is very large, human operator's control motion range must be large to allow telemanipulator's full range of motion resulting poor control resolution. One way to solve the poor resolution problem is to use indexing. However, rate mode can provide any higher degree of resolution without use of indexing. If two modes are mixed, master controller will be more convenient. The mixed mode algorithm, changes operating mode from position mode to rate mode or vise versa using fuzzy logic. The fuzzy logic algorithm, which has been designed to recognize the teleoperator's intended motion properly, provides an intelligence to a master controller.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.1-9
• /
• 2001

The recent spread of scaled telemanipulation into microsurgery and the nano-world increasingly requires the identification of the possible operation region as a main system specification. A teleoperation system is a complex cascaded system since the human operator, master, slave, and communication are involved bilaterally. Hence, a small time delay inside a master and slave system can be critical to the overall system stability even without communication time delay. In this paper we derive an upper bound of the scaling product of position and force by using Llewellyns unconditional stability. This bound can be used for checking the validity of the designed bilateral controller. Time delay from the sample and hold of computer control and its effects on stability of scaled teleoperation are modeled and simulated based on the transfer function of the teleoperation system. The feasible operation region in terms of position and force scaling decreases sharply as the sampling rate decreases and time delays inside the master and slave increase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.261-265
• /
• 2005

In this paper, we constructed the infrastructure with wireless LAN and Access Point in the indoor environment and implemented the teleoperation. Wireless LAN based teleoperation system is irregular communication delay according to environment condition and occurrence possibility of blackout is very high. In this paper, In case these problem happened, we measured communication delay time by real time, and did mobile robot to control harmoniously through vision and force reflection information. Also, we present obstacle-avoidance mode that mobile robot can travel without collision using direction information in case communication delay time is large. We proved usefulness of presented algorithm through teleoperation experiment to apply presented algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.158-163
• /
• 2001

Operators suffer much difficulty in manipulating micro/nano-sized objects without the assistance of human interfaces, due to the scaling effects in micro/nano world. This paper presents a micro manipulation system based on the teleoperation techniques which enables the operators to manipulate the objects with ease by transferring both human motion and manipulation skill to a micromanipulator. An experimental setup consisting of a micromanipulator operated under stereo-microscope with the help of intelligent user interface provides a tool that can be used to visualize and manipulate micro-sized 3D objects in a controlled manner. The key features of a micro manipulation system and control strategies using teleoperation techniques for handling micro objects are presented. Experimental results demonstrate the feasibility of this system in precisely controlling trapping and manipulation of micro objects based on teleoperation techniques.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.363-371
• /
• 2021

Forest operations like timber harvesting have already been mechanized to reduce hazards to the worker and increase productivity. However, timber harvesting operations have still been considered potentially dangerous and expensive on steep terrain. Teleoperation, to control the timber harvesting machine at a distance, has the potential to improve the safety, productivity and efficiency of harvesting operations on steep terrain. To verify the effects of teleoperation, an experimental prototype system of a monitor image-based teleoperation was constructed using a real forestry machine. In this study, the productivity of excavator based grapple loader, which is one of the most used mechanized harvesting equipment in the timber production, was analyzed using time-study method. Factors like skill and age of operators, influencing loader productivity in timber loading operation were also evaluated by statistical analysis. Productivity analysis results showed that less experienced operators were more productive than experienced operators for teleoperation through image of monitors in the operator cabin. These results are shown to be unfamiliar to the monitor image and different loading operation pattern by operators. According to the results, the monitor image-based teleoperation system of forestry machine need to improve the resolution and installation position of camera. It was expected that additional studies will be needed for real-time remote control of forestry machine in the future.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3876-3881
• /
• 2012

일반적으로 마스터/슬레이브 원격제어 시스템에서 작업자는 원격에서 슬레이브를 제어하기 위하여 카메라 영상 같은 시각 정보를 이용하는 경우가 많은데, 많은 데이터 양으로 인하여 원격지의 영상 정보에 지연이 발생할 수 있고 카메라 위치에 따라 영상 정보가 제한되거나 불완전하여 제어가 어려운 경우가 생길 수 있다. 카메라 영상을 이용한 원격제어 시스템의 이러한 문제점을 해결하기 위하여 본 논문에서는 영상 정보 대신에 3차원 재구성 그래픽 모델을 이용한 원격제어 시스템을 제안한다. 제안된 원격제어시스템은 로봇 제어 모듈, 힘반향 조이스틱을 이용한 마스터 모듈, 그래픽유저인터페이스모듈로 이루어져 있는데, 여기서 그래픽유저인터페이스모듈은 원격지에서 전달된 적은 양의 센싱 데이터를 이용하여 3차원으로 재구성된 그래픽 모델을 작업자에게 제공해 준다. 제안된 원격제어 시스템은 펙인홀(peg-in-hole) 조립 작업을 이용하여 그 효과가 검증되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.824-828
• /
• 2003

This paper explains problems of force-reflecting teleoperation grinding work and proposes some methods to solve those. For stable contact between robot tool(grindstone) and contact surface the mechanical impedance force control is used. The sliding phenomenon of grindstone has been appeared at the contact surface during the grinding work. The sliding problems caused by friction and rotation of grindstone are eliminated by using tangential direction sliding compensation control. The rotation force of grindstone makes the tool move to tangential direction along the surface suddenly even though an operator pushes the tool only in normal direction to the surface. Normal direction force control is applied for grinder not to roll and fracture on the grinding surface. Vibration problem of grindstone is decreased by second order low-pass filter. Therefore we can precise grinding work at the grinding surface and feel the reality

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1124-1129
• /
• 2008

Recently, two-port time-domain passivity approach was modified for time-varying communication delay. The newly proposed approach could achieve stable teleoperation even under the serious time-varying delay and packet loss communication condition. However, after some operation hour, the accumulated energy difference between the input energy from one port and the output energy at the other port caused unstable behavior until the passivity controller is activated. Resetting scheme is introduced for solving this problem, and stable bilateral teleoperation can be guaranteed without worrying about the accumulated energy difference.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.789-794
• /
• 2014

This paper presents some real performance of two typical bilateral teleoperation benchmark tasks: peg-in-hole and surface tracking tasks. The tasks are performed by an energy-bounding algorithm in the master control and position-based impedance algorithm in the slave control. Performance is analyzed for the position-force tracking capabilities from free space motion to surface contacting motion. In addition, preliminary user performance is evaluated by measuring the completion time and maximum/average contact forces. The quality of the measured performance is also compared with that of other existing approaches.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.349-354
• /
• 2002

In this study, we proposed a web-based teleoperation system to enhance the productivity and flexibility of the greenhouse since basically, internet-based teleoperation enables cheap, expandable system to be implemented. Platform independent language, Java-based control system can overcome the platform dependency which most of conventional control systems have. One of the merits of the proposed system is the flexibility of the data based system from which some valuable analysis can be implemented on-line. Some basic experiments show the stability and field applicability of the proposed remote control system.