• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.721-724
• /
• 2000

This paper has been demonstrated to be essential to successful telemanipulator control when the communication delay between master arms in the operator control station and telemanipulators in the remote site. This paper includes the human dynamics to generate a control command, the monitoring force feedback in order to robust under short time delays and the controller not to requre the derivative of interaction forces. Simulation results suggest that, the proposed control system should be superior to conventional systems in terms of performance and robustness under short time delays.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2827-2830
• /
• 2003

Tele manipulator is distingushed from industrial robot by iterating same specified work. Manipulator operator is included in control loop for controlling the telemanipulator because he decide directly during the work and order controllabily reducing the modelling error of telemanipulator which depend on the PID controller. But position-force control method of bidirectional control impose unsafety of vibiration and Analytic Hierachy Method can stabilize for reducing nonlinear modelling error by expert operator because of transformation empirical control rule to linear model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.35-38
• /
• 2000

Since the telemanipulator consisting of high reduction ratio gear joints has a slow dynamics comparing with the master manipulator, its control signal is likely to be saturated resulting in poor tracking performance and deteriorated stability. This paper proposes a bilateral control scheme of a telemanipulator having high reduction ratio, which can compensate the control input saturation. The experimental results show that the proposed control scheme has excellent performances.

• 한국지능시스템학회논문지
• /
• 제14권5호
• /
• pp.525-532
• /
• 2004

원격 조작기는 같은 일을 반복적으로 수행하지 않는다는 점에서 산업용 로봇과는 구별된다. 즉 조작자가 작업을 하는 동안 직접 판단을 내리며 조작기에 제어 명령을 내린다는 점에서 조작자도 원격 조작기를 제어하기 위한 제어루프에 포함된다. PID 제어에 의존하는 원격 제어기의 모델링 오차를 줄이기 위한 방법이 퍼지 제어기의 구현이라 할 수 있는데 위치-힘 제어 방식의 양방향 제어에서는 진동으로 인한 불안정성을 내포하고 있다 비선형성에 의한 모델링 오차를 계층제어 방식에서는 여러 각도의 입력을 종합하여 판단한 조작자의 경험적 제어 규칙을 선형적으로 변환 모델링 함으로써 안정화시킬 수 있다. 즉, 다속성 계층을 사용함으로써 선형적인 결과를 얻어 낼 수가 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.164-167
• /
• 1993

Telemanipulator became one of refocused fields with the help of various technology integration concerned. As one of key technologies much simpler opeartion of manipulator by operators and feedback method to operator can be counted. For such purpose virtual reality techniques are being implemented and in this paper tactile feeling among human 5 feelings will be discussed. Movement manipulation in free space and gripper manipulation methods are discussed in combination with operator's organs. Tactile signal of telemanipulator's gripper is also integrated into tactile VR control system. Such tactile VR technology is regarded as one of important roles for advanced robot technology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.461-465
• /
• 1996

Position and rate control modes arc the two common modes for controlling remote manipulators with joysticks or hand controllers. Generally, position mode is easier for teleoperation than rate modes, when the manipulation work space is small or comparable to the human operator's control space. When the telemanipulator's work space is very large, human operator's control motion range must be large to allow telemanipulator's full range of motion resulting poor control resolution. One way to solve the poor resolution problem is to use indexing. However, rate mode can provide any higher degree of resolution without use of indexing. If two modes are mixed, master controller will be more convenient. The mixed mode algorithm, changes operating mode from position mode to rate mode or vise versa using fuzzy logic. The fuzzy logic algorithm, which has been designed to recognize the teleoperator's intended motion properly, provides an intelligence to a master controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.838-843
• /
• 1991

A telemanipulator that reflects grasping force of the slave gripper to the human operator was implemented in order for manipulation to be more delicate and safe. An industrial robot gripper was used as the slave manipulator. The master manipulator was constructed to make it easy for a human operator to direct the slave and to feel the reflected gripping force. Reflected force was generated by the servomotor of the master. The force signal and position signals of the master and the slave was used to generate driving force signal. Basically position-position type control was used. Miner force feedback is added to improve the performance of the system. Implemented system was tested by colliding two fingers of the slave manipulator, and here switching was used to archive more fast and easy manipulation.

• 전자공학회논문지SC
• /
• 제37권5호
• /
• pp.22-33
• /
• 2000

고감속비의 관절을 갖는 고하중 조작기를 원격조작 힘반영 제어시스템의 슬레이브 조작기로 사용할 경우에는 마스터 조작기에 비하여 느린 동특성으로 인해 슬레이브 조작기의 제어입력에 포화가 빈번히 발생한다. 슬레이브 조작기가 유연성을 갖도록 설계한 경우에도 제어입력이 포화되면 위치제어루프가 끊어지기 때문에 시스템이 불안정해지고 슬레이브 조작기가 물체에 강하게 접촉하는 경우가 발생하며, 유연한 힘제어 성능을 얻는데 어려움이 있다. 본 논문에서는 고하중 원격조작기에 대해 제어입력의 포화를 고려한 힘반영 유연성 제어기법을 제안한다. 제안하는 힘반영 유연성 제어기법은 제어입력의 포화를 가지는 원격조작기에 대하여 안정한 힘반영 성능과 함께 정밀한 위치제어와 유연성제어 성능을 얻을 수 있다는 장점이 있다. 제안한 제어기법의 안정도를 해석하였고 실험을 통하여 성능을 검증하였다.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.

• 제어로봇시스템학회논문지
• /
• 제6권10호
• /
• pp.894-902
• /
• 2000

This paper proposes a force reflection control method with a speed saturation compensation scheme for the slave manipulators having a speed saturation due to the high reduction ratio joints. When speed saturation is generated, the proposed force reflection control method not only shows an anti-windup feature in controlling the slave manipulator but also makes the master manipulator move slowly using the force reflection caused by saturation. In this way, the position of the slave manipulator tracks the reference position regardless of speed saturation. The experimental results show that the proposed control method provides excellent performance.