• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.58-63
• /
• 2016

This paper presents a study of heat dissipation away from the fuel combustion of a marine diesel engine. These engines are operated for long periods under high load conditions: so cooling systems are necessary for radiation and control of the high temperature levels. In the study, each component of the water cooling system was developed to achieve improvements in cooling and safety. Heat transfer considerations and arrangement design for the components were important and an intercooler and exhaust manifold incorporated. An optimization of the cooling water's flow path was achieved subject to the need for convenient maintenance. The 750Ps marine diesel engine was used for performance testing of the cooling system. The test results showed adequate cooling performance improvement.

• 컴퓨터교육학회논문지
• /
• 제14권6호
• /
• pp.83-89
• /
• 2011

이 연구에서는 스마트 HDMI 스위치를 제안하는데, HDMI 플러그를 물리적으로 빼고 다시 껴는 일이 없는 상태에서 새로이 형성되는 비디오 스트림을 감지해서 자동적으로 전송 경로를 해당 포트로 전환해 주는 것이 주된 내용이다. 더 나아가 제안하는 시스템은 밀리미터 밴드 기술을 기반으로 진보된 무선 비디오 전송 구조 안에서 설계되었다. 하드웨어 실험을 통해서 제안된 시스템이 스마트 포트 전환 기능을 포함하는 가운데 풀 HD 비디오 전송 성능을 갖는 것을 보임으로써 그 유용성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.670-672
• /
• 2014

In this study, we investigate active control of noise transmitted through a window of enclosures minimizing the acoustic power. To reduce noise of the enclosures, passive methods with absorbing material are generally used. The passive methods, however, are limited use due to the vantilation windows. In this case, these windows are path of noise leakage. Feedforward active noise control technology is applied to minimize the sound power from the enclosure. The feedforward controller is implemented with FIR filter based on the transfer functions calculated numerically. The controller reflects the delay due to FIR filter. The noise transmitted through the window is actively controlled, and the reduction of the power is obtained by 15dB.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.528-533
• /
• 2008

A closed circuit cooling tower having high temperature of cooling water and small water flow rate is investigated. To study the characteristics of the heat transfer of heat exchanges in a cooling tower with multi paths a numerical method is used. The results show that the staggered tube arrangements in a bank show better performance than aligned ones for temperature variation with various outer diameters of tube bundles. In case of one pass, the 15.88 mm tube case shows about 9% better performance than the 25.4 mm tube case. In two paths, the tube outside diameter of 15.88 mm show about 14.4% better results than the 25.4 mm diameter case.

• 산업경영시스템학회지
• /
• 제24권62호
• /
• pp.11-20
• /
• 2001

At the initial deployment of B-ISDN, the heterogeneity of services and the bandwidth requirement make dimensioning of B-ISDN much more complicated than the dimensioning of homogeneous circuit or packet switched networks. Therefore B-ISDN must be extended gradually according to future telecommunication technology or service demands. In this paper, we propose a mathematical formulation for dimensioning problem of B-ISDN extension, considering the characteristics of ATM(Asynchronous Transfer Mode) such as various quality of services, the statistical multiplexing effects of VPCs(Virtual Path Connections) and the modularity of transmission links allocated when new B-ISDN nodes are given. The algorithm based on the simultaneous linear approximation technique and Lagrangian relaxation method and some numerical results are also presented.

• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.257-265
• /
• 2001

Placing a hydrogen conducting, methanol impermeable metallic barrier like palladium (Pd) is a well-known method for preventing methanol crossover through solid polymer electrolyte for direct methanol fuel cells (DMFC). Applying a bias potential between the anode and the barrier can further develop this concept so that the hydrogen transfer rate is enhanced. Since hydrogen diffuses in Pd as atomic form while it moves through nafion electrolyte as ion, it has to be reduced or oxidized whenever it passes the interface formed by Pd and the electrolyte. We performed experiments to measure the hydrogen transport through the Pd membrane placed in Nafion electrolyte of hydrogen/oxygen fuel cell (PEMFC). Applying a bias potential between the hydrogen electrode of the cell and the Pd membrane facilitated the hydrogen passage through the Pd membrane. The results show that the cell current measured with the Pd membrane placed reached almost 40 % the value measured with the cell without Pd membrane. It was found that the current flown through the bias path is only a few percent of the cell current.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.439-451
• /
• 2018

The stress path characteristics of surrounding rock in the formation of gob were analysed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analysing the instability of deep gob was established based on the mechanism of stress relief in deep mining. The energy evolution law was investigated by introducing the local energy release rate index (LERR), and the energy criterion of instability of surrounding rock was established based on the cusp catastrophe theory. The results showed that the evolution equation of the local energy release energy of the surrounding rock was quartic function with one unknown and the release rate increased gradually during the mining. The calculation results showed that the gob was stable. The LERR per unit volume of the bottom structure was relatively smaller, which mean the stability was better. The LERR distribution showed that there was main energy release in the horizontal direction and energy concentration in the vertical direction which meet the characteristics of deep mining. In summary, this model could effectively calculate the stability of surrounding rock in the formation of gob. The LERR could reflect the dynamic process of energy release, transfer and dissipation which provided an important reference for the study of the stability of deep mined out area.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.97-105
• /
• 2002

The use of rapid prototyping (RP) has reduced time to market, cut total costs and improved product quality by giving design and manufacturing teams the opportunity to verify and fine tune designs before committing them to expensive tooling and fabrication. In order to improve their unique characteristics according to the working principles, Variable Lamination Manufacturing process (VLM-ST) and corresponding CAD/CAM software (VLM-Slicer) is developed. The objective of this study is to improve the accuracy of VLM-ST process, and it can be done by offset fur cutting error correction, cutting path overrun fur sharp edge and reference shape generation for off-line stacking. It has been shown that, through the verification experiments for given practical shapes, the proposed algorithms are effective for diverse categories of three-dimensional shapes.

• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.629-636
• /
• 2007

This paper describes the process of analyzing vehicle stiffness in terms of frequency band in order to improve vehicle handling. Vehicle handling and ride comfort are highly related to the systems such as suspension, seat, steering, and the car body design. In existing analytical processes, the resonance frequency of a car body is designed to be greater than 25 Hz in order to increase the stiffness of the body against idle vibration. This paper introduces a method for using a band with a frequency lower than 20 Hz to analyze how stiffness affects vehicle handling. Accordingly, static stiffness analysis of a 1g cornering force was conducted to minimize the deformation of vehicle components derived from a load on parts attached to the suspension. In addition, this technology is capable of achieving better performance than older technology. Analysis of how body attachment stiffness affects the dynamic stiffness of a bushing in the attachment parts of the suspension is expected to lead to improvements with respect to vehicle handling and road noise. The process of developing a car body with a high degree of stiffness, which was accomplished in the preliminary stage of this study, confirms the possibility of improving the stability performance and of designing a lightweight prototype car. These improvements can reduce the time needed to develop better vehicles.

• 한국전자파학회논문지
• /
• 제27권9호
• /
• pp.834-843
• /
• 2016

본 논문에서는 PIN 다이오드를 이용한 S-대역 고출력 경로선택형 SP4T 및 SP4T 구동회로의 설계를 보였다. 격리도 개선을 위하여 SP4T의 각 경로(path)는 직렬 및 병렬 PIN 다이오드 2개를 cascade하여 구성하였다. 설계된 SP4T 회로는 칩-형 PIN 다이오드와 박막(thin-film) 기법으로 제작된 20 mil AIN 기판을 사용하여 구현하였다. 또한, 설계된 SP4T의 구동회로는 1개의 multiplexer와 4개의 NMOS-PMOS push-pull 쌍을 이용하여 구성하였다. 온-웨이퍼 측정결과, 제작된 SP4T는 최대 삽입손실 1.1 dB, 최소격리도 41 dB의 특성을 보였다. 구동회로의 PIN 다이오드의 on-off, off-on 천이시간은 동일 PIN 다이오드의 패키지를 이용하여 시험하였으며, 모두 약 100 nsec 이하의 천이시간을 보였다. 150 W 입력 고출력 시험 결과, 격리도와 삽입손실은 동축 패키지의 손실 및 부정합을 고려하면 온-웨이퍼 측정결과에 준하는 결과를 얻었다.