• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.227-230
• /
• 2000

건설 도면정보의 공유 및 교환은 건설 CALS/EC(Continuous Acquisition & Lifecycle Support /Electronic commerce) 환경의 필수적인 요소이다. 그러나 CAD 시스템의 버전변화와 별도의 한글처리로 인하여 도면정보의 관리 렌 활용에 많은 문제점이 발생하고, 상이한 CAD 시스템간의 파일 교환이 제대로 이루어지지 못하는 등 도면정보 교환을 위한 정보모델의 구축이 절실히 요구되고 있다. 이러한 환경에서 STEP(Standard for the Exchange of Product model data)은 건설 도면정보의 교환 및 공유를 위한 정보모델을 구축함에 있어서 그 활용 가능성이 높다. 본 연구에서는 STEP을 이용하여 건설분야에서 활용 가능한 2차원 도면정보 모델을 개발하고자 한다. 이를 위하여 STEP내의 AP 202를 기반으로, AP 214와 독일의 2차원 도면정보 표준화 프로젝트인 STEP-CDS를 참조하도록 한다. 그리고 실제 개발된 도면정보모델이 기존 CAD 도면 데이터를 제대로 표현할 수 있는지 검증하기 위하여 상용 CAD시스템인 AutoCAD Rl4의 DXF 데이터를 개발된 정보모델로 변환하여 그 결과를 검토하고자 한다. 세부적으로는 DXF 데이터의 도면정보모델로의 변환을 위하여 DXF 구조의 STEP 스키마를 정의한다. 이때 이 스키마와 도면정보모델의 스키마간의 매핑을 위하여 STEP내의 EXPRESS-X를 이용하기로 한다. 또한 도면정보 모델의 데이터의 뷰잉과 브라우징을 위하여 도면정보 뷰어를 개발한다.

• Nuclear Engineering and Technology
• /
• v.40 no.5
• /
• pp.397-408
• /
• 2008

This paper describes the application of a software fault tree analysis (FTA) as one of the analysis techniques for a software safety analysis (SSA) at the design phase and its analysis results for the safety-critical software of a digital reactor protection system, which is called the KNICS RPS, being developed in the KNICS (Korea Nuclear Instrumentation & Control Systems) project. The software modules in the design description were represented by function blocks (FBs), and the software FTA was performed based on the well-defined fault tree templates for the FBs. The SSA, which is part of the verification and validation (V&V) activities, was activated at each phase of the software lifecycle for the KNICS RPS. At the design phase, the software HAZOP (Hazard and Operability) and the software FTA were employed in the SSA in such a way that the software HAZOP was performed first and then the software FTA was applied. The software FTA was applied to some critical modules selected from the software HAZOP analysis.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1739-1745
• /
• 2014

Prediction of fault-prone modules continues to attract researcher's interest due to its significant impact on software development cost. The most important goal of such techniques is to correctly identify the modules where faults are most likely to present in early phases of software development lifecycle. Various software metrics related to modules level fault data have been successfully used for prediction of fault-prone modules. Goal of this research is to predict the faulty modules at design phase using design metrics of modules and faults related to modules. We have analyzed the effect of pre-processing and different machine learning schemes on eleven projects from NASA Metrics Data Program which offers design metrics and its related faults. Using seven machine learning and four preprocessing techniques we confirmed that models built from design metrics are surprisingly good at fault proneness prediction. The result shows that we should choose Naïve Bayes or Voting feature intervals with discretization for different data sets as they outperformed out of 28 schemes. Naive Bayes and Voting feature intervals has performed AUC > 0.7 on average of eleven projects. Our proposed framework is effective and can predict an acceptable level of fault at design phases.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.6
• /
• pp.193-204
• /
• 2022

In a smart factory environment in a small and medium-sized enterprise (SME) environment, sensors and actuators operating on actual manufacturing lines, programmable logic controllers (PLCs) to manage them, human-machine interface (HMI) to control and manage such PLCs, and consists of operational technology server to manage PLCs and HMI again. PLC and HMI, which are in charge of control automation, perform direct connection with OT servers, application systems for factory operation, robots for on-site automation, and production facilities, so the development of security technology in a smart factory environment is demanded. However, smart factories in the SME environment are often composed of systems that used to operate in closed environments in the past, so there exist a vulnerable part to security in the current environment where they operate in conjunction with the outside through the Internet. In order to achieve the internalization of smart factory security in this SME environment, it is necessary to establish a process according to the IEC 62443-4-1 Secure Product Development Life cycle at the stage of smart factory SW and HW development. In addition, it is necessary to introduce a suitable development methodology that considers IEC 62443-4-2 Component security requirements and IEC 62443-3 System security requirements. Therefore, this paper proposes an application plan for the IEC 62443 based development security process to provide security internalization to smart factories in an SME environment.

• Journal of Information Technology Applications and Management
• /
• v.19 no.2
• /
• pp.181-196
• /
• 2012

The cost of software maintenance occupies about two thirds in the software lifecycle. However, it is not easy to estimate the cost of software maintenance because of various viewpoints about software maintenance, unclear estimation methods, and complex procedures. Until now, the cost estimation model has used compensation factors for software characteristic and environment on the basis of program size. Especially, most of existing models use maintenance rate of total software cost as a main variable. This paper suggests the software maintenance cost estimation model that uses the result of calculating real maintenance efforts. In this paper, we classify functional maintenance and non-functional maintenance as software maintenance activity type. For functional maintenance, present function point of target software is needed to evaluate. The suggested maintenance cost evaluation model is applied to a software case in public sector. This paper discusses some differences between our model and other modes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.936-941
• /
• 2005

To achieve rapid developments and ensure competitiveness, cost saving, digital manufacturing is essential in die shops. Digital Manufacturing is a technology to facilitate effective product developments and agile productions by digital environments representing the physical and logical schema and the behavior of real manufacturing system including manufacturing resources, processes and products. For applying digital manufacturing to die shop, engineering information managements of products, manufacturing process and resources are needed. In this paper proposes and implements, PLM approach for achieving engineering collaborations in engineering activities. We suggest detail procedures, some examples and considerations of PPR managements in die shop.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.1
• /
• pp.21-32
• /
• 2009

The systems engineering (SE) process shall be applied to the project for successful development of ultra-high-speed (UHS) Maglev train system which is one of very large and complex systems. It is important to abolish technology differentials from the advanced developers such as Germany, Japan, etc. and to ensure discriminatory competitiveness of the application of systems engineering process for the development of the system based on appropriate concepts and requirements. General operation concept and stakeholder's requirements of UHS Maglev train system must be elicited with system concept for initiating the project. The management plan should be devised for all sorts of systems engineering activities of risk management, performance management, lifecycle cost management, etc. This paper would support to establish the systems engineering management plan (SEMP) for the program of UHS Maglev train system development with associated documents.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.987-992
• /
• 2007

Safety critical systems are those in which a failure can have serious and irreversible consequences. Nowadays digital technology has been rapidly applied to critical system such as railways, airplanes, nuclear power plants, vehicles. The main difference between analog system and digital system is that the software is the key component of the digital system. The digital system performs more varying and highly complex functions efficiently compared to the existing analog system because software can be flexibly designed and implemented. The flexible design make it difficult to predict the software failures. This paper reviews safety standard and criteria for safety critical system such as railway system and introduces the framework for the software lifecycle. The licensing procedure for the railway software is also reviewed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5290-5304
• /
• 2016

With the growth of the massive amount of data, the failure probability of the cloud storage node is becoming more and more big. A single fault tolerance strategy, such as replication and erasure codes, has some unavoidable disadvantages, which can not meet the needs of the today's fault tolerance. Therefore, according to the file access frequency and size, an adaptive hybrid redundant fault tolerance strategy is proposed, which can dynamically change between the replication scheme and erasure codes scheme throughout the lifecycle. The experimental results show that the proposed scheme can not only save the storage space(reduced by 32% compared with replication), but also ensure the fast recovery of the node failures(increased by 42% compared with erasure codes).