• Applied Microscopy
• /
• v.39 no.2
• /
• pp.133-139
• /
• 2009

A officinal mushroom, Phellinus linteus (PL) has been known to exhibit potent biological activities including antioxidative and anticancer effect. PL is consumed as a type of powder or extract for the purpose of health promotion and disease treatment. Recently superfine PL products was commercialized according to the development of pulverizing technology such as nanomill, so the evaluation of food safety is suggested. This study was conducted to evaluate the food safety of superfine PL (SPL) through hematological, biochemical and histological examination in mice as compared with fine PL (FPL). In the particle size distribution in volume after nanomill processing, the mean diameter of SPL and FPL particles was 11.78 ${\mu}m$ and 216.1 ${\mu}m$, and d (0.5), the particle diameter measured at 50% of distribution was 5.5 ${\mu}m$ and 147.9 ${\mu}m$, respectively. As the result of body weight, food intake and the weight of organs, SPL group didn't show any statistical difference compared with FPL group and normal group (N). Hematological and biochemical values were also involved in the normal range, although ALT (N vs. FPL, P<0.001) and BUN (N vs. FPL, P<0.01; N vs. SPL, P<0.01) showed significance compared with N group but there are no significance between FPL and SPL group. In the result of histological examination with liver, kidney, spleen, and small and large intestine, abnormal findings such as inflammatory reaction and histological changes were not observed. Our results suggest that the oral intake of SPL diet is not harmful to the animal in the hematological, biochemical and histological aspects although particle size was reduced to the level of superfine. However, further study will be necessary to confirm the histological safety in relation to the gastrointestinal contact of superfine particles in the case of large amount and long-term intake.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.420-432
• /
• 2011

Population dynamics of greenhouse whitefly, Trialeurodes vaporariorum (Westwood), were modeled and simulated to compare the temperature effects of air and tomato leaf inside greenhouse using DYMEX model simulator (pre-programed module based simulation program developed by CSIRO, Australia). The DYMEX model simulator consisted of temperature dependent development and oviposition modules. The normalized cumulative frequency distributions of the developmental period for immature and oviposition frequency rate and survival rate for adult of greenhouse whitefly were fitted to two-parameter Weibull function. Leaf temperature on reversed side of cherry tomato leafs (Lycopersicon esculentum cv. Koko) was monitored according to three tomato plant positions (top, > 1.6 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at same three positions using a Hobo self-contained temperature logger. The leaf temperatures from three plant positions were described as a function of the air temperatures with 3-parameter exponential and sigmoidal models. Data sets of observed air temperature and predicted leaf temperatures were prepared, and incorporated into the DYMEX simulator to compare the effects of air and leaf temperature on population dynamics of greenhouse whitefly. The number of greenhouse whitefly immatures was counted by visual inspection in three tomato plant positions to verify the performance of DYMEX simulation in cherry tomato greenhouse where air and leaf temperatures were monitored. The egg stage of greenhouse whitefly was not counted due to its small size. A significant positive correlation between the observed and the predicted numbers of immature and adults were found when the leaf temperatures were incorporated into DYMEX simulation, but no significant correlation was observed with the air temperatures. This study demonstrated that the population dynamics of greenhouse whitefly was affected greatly by the leaf temperatures, rather than air temperatures, and thus the leaf surface temperature should be considered for management of greenhouse whitefly in cherry tomato grown in greenhouses.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.474-481
• /
• 2011

Potato late blight caused by the fungus Phytophthora infestans is one of the most vital diseases damaging the potato plant. It is for this reason that breeding potato cultivars resistant to late blight is now becoming a major concern around the world. The B3C1 clones has been introduced by the Highland Agriculture Research Center, RDA. The clones which came from International Potato Center in 2005 have a durable resistance to late blight. The clones were bred under a short-day condition in Peru. However, there was still no report on the adaptability of these clones to the long-day condition in Korea. Therefore, this study was conducted to evaluate the late blight resistance and major agronomic characteristics of B3C1 clones under Korea's long-day condition. This study was also done to generate genetic resources for developing new varieties resistant to late blight. In this study it was found out that in naturally infested field with P. infestans, AUDPC (area under disease progress curve) values of all B3C1 clones were significantly lower than those of the control varieties, 'Superior', 'Atlantic', and 'Haryeong'. It was found out that B3C1 clones had a high level of resistance to late blight and that they could be used as genetic resources to breed potato varieties with late blight resistance. However, several undesirable characteristics such as extremely late maturity, excessive growth of stems and stolons, and production of tubers that cannot easily be removed from the stolons were also observed. Among the twenty B3C1 clones, two clones, LB-8 (CIP393077.159) and LB-11 (CIP393371.159), were selected for cultivating at the highland area of Korea. Two B3C1 clones were crossed with Korean breeding lines and clonal selection for the progenies is still in progress.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.366-370
• /
• 2013

This experiment was carried out to establish the screening methods for the selection of Zantedeschia aethiopica cultivars resistant to calla lily soft rot caused by Pectobacterium carotovorum subsp. carotovorum. A center of leaf and petiole tissues of four Z. aethiopica cultivars were wounded and inoculated with three different inoculum concentrations, $1{\times}10^7cfu/mL$, $1{\times}10^8cfu/mL$, and $1{\times}10^9cfu/mL$, of EccNHRI-21 isolate. And they were evaluated at 4, 18, and 26 hours after inoculation. The lesion of maceration was developed well in the leaf tissues inoculated with $1{\times}10^9cfu/mL$ concentration. And evaluation of resistance in 18 hours after inoculation was correlated with field resistance positively. Using this method, ten Z. aethiopica commercial cultivars and four wild types were screened. 'Crowbrough' and 'White Cutie' were selected as highly resistant genotypes and 'Mont Blanc' and 'Silky White' as resistant genotypes. 'Wedding March' and 'Kiwi Blush' were evaluated as moderate resistant and the others including 'Childsiana' were susceptible. And all of four wild types were evaluated as more than moderate resistant. In spite of control through cultural, biological and chemical methods, the use of resistant cultivars is most efficient to overcome calla lily soft rot. This newly developed screening method was helpful for breeding new varieties resistant to calla lily soft rot.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.107-114
• /
• 2015

The purpose is reducing radiation dose while maintaining of image quality in liver dynamic CT(LDCT) scan, by protocols generally used and the tube voltage set at a low level protocol compared to the radiation dose and image quality. The target is body mass index, 18.5~24 patients out of 40 patients who underwent the ACT(abdominal CT). Group A(tube voltage : 120kVp, SAFIRE strength 1) of 20 people among 40 people, to apply the general abdominal CT scan protocol, group B(tube voltage : 100kVp, apply SAFIRE strength 0~5) was 20 people, set a lower tube voltage. Image quality evaluation was setting a region of interest(ROI) in the liver parenchyma, aorta, superior mesenteric artery (SMA), celiac trunk, visceral fat of arterial phase. In the ROI were compared by measuring the noise, signal to noise ratio(SNR), contrast to noise ratio(CNR), CT number. In addition, qualitative assessments to evaluate two people in the rich professional experience in Radiology by 0-3 points. We compared the total radiation dose, dose length product(DLP) and effective dose, volume computed tomography dose index(CTDIvol). The higher SAFIRE in the tube voltage 100 kVp, noise is reduced, CT number was increased. Thus, SNR and CNR was increased higher the SAFIRE step. Compared with the tube voltage 120kVp, noise, SNR, CNR was most similar in SAFIRE strength 2 and 3. Qualitative assessment SAFIRE strength 2 is the most common SAFIRE strength 2 the most common qualitative assessment, if the tube voltage of 100kVp when the quality of the images better evaluated was SAFIRE strength 1. Dose was reduced from 21.69%, in 100kVp than 120kVp. In the case of a relatively high BMI is not LDCT scan, When it is shipped from the factory tube voltage is set higher, unnecessary radiation exposure when considering the reality that is concerned, when according to the results of this study, set a lower tube voltage and adjust the SAFIRE strength to 1 or 2, the radiation without compromising image quality amount also is thought to be able to be reduced.

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.245-251
• /
• 2017

This study measured the exposure dose during abdominal-pelvic CT exam which occupies 70% of CT exam and tried to propose a protocol for optimized exposure dose in abdomen and pelvis without affecting the imagery interpretation. The study scanned abdomen-pelvis using the current clinical scan method, the 120 kVp, auto exposure control(AEC), as 1 phase. As for the newly proposed 2 phase scan method, the study divided into 1 phase abdomen exam and 2 phase pelvis exam and each conducted tube voltage 120 kVp, AEC for abdomen exam, and fixed tube current method in 120 kVp, 100, 150, 200, 250, 300, 350, 400 mA for pelvis exam. The exposure dose value was compared using $CTDI_{VOL}$, DLP value measured during scan, and average value of CT attenuation coefficient, noise, SNR from each scan image were obtained to evaluate the image. As for the result, scanning of 2 phase showed significant difference compared to 1 phase. In $CTDI_{VOL}$ value, the 2 phase showed 26% decrease in abdomen, 1.8~59.5% decrease in pelvis for 100~250 mA, 12.7%~30% increase in pelvis for 300~400 mA. Also, DLP value showed 53% decrease in abdomen and 41~81% decrease in pelvis when scanned by 2 phase compared to 1 phase, but it was not statistically significant. As for the SNR, when scanning 2 phase close to heart, scanning 1 phase close to pelvis, scanning and scanning 1 phase at upper and lower abdomen, it was higher when scanning 2 phase for 200~250 mA. Also, the CT number and noise was overall similar, but the noise was high close to pelvis. However, when scanning 2 phase for 250 mA close to pelvis, the noise value came out similar to 1 phase, and did not show statistically significant difference. It seems when separating pelvis to scan in 250 mA rather than 400 mA in 1 phase as before, it is expected to have reduced effect of exposure dose without difference in the quality of image. Thus, for patients who often get abdominal-pelvic CT exam, fertile women or children, this study proposes 2 phase exam for smaller exposure dose with same image quality.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.39-50
• /
• 2011

This study furnishes basis data for plan foundation and proper valuation of view by presenting objective and concrete selection standards and ways of Landscape Control Point(LCP) on valuation of development projects. To sum up the results of study, it establishes the prospect, publicity and direction of view as a selection standard LCP on precedent studies. The prospect, which includes visual range, direction of view, geographical features, and visibility, sets up as a valuation basis picking out the available places which have alterations according to direction and distance in practice. In the case of publicity, to select the place as there presentative area where public activities often happen than others, thirteen evaluation indexes including administration facilities, educational facilities, commercial facilities and so on. And variation of landscape is set up as an assessment index to know how much the land has changed from the beginning to the end of development. To apply the selection standards to sample places, the preliminary LCP is founded by analyzing both the prospect and published; a series of courses for selecting the final LCP is founded by analyzing the preliminary LCP and variableness of landscape on a basic of placed which have many alterations of view. At last, in the case of a selection system for LCP, the preliminary LCP is founded by analyzing both the prospect and publicity; a series of courses for selecting the final LCP is found by analyzing the preliminary LCP and variableness of landscape. Applying selection standards and the assessment index to the Sam-deok 3 residence improvement area, in the case of prospect, the southern distant view area has the largest extent. Next, the results of the assessment using the system of publicity show that a five-lane road is taking up the largest area. Hence, a total of 48 preliminary LCPs are set up by analyzing both the prospect and publicity. The results of analyzing landscape variation, one of the valuation indexes, show that Sam-deok dong around the post office has the highest rate of variation at 28.07%. Finally, three LCPs in each part, which are close range, middle range and distance view, are selected; thus, a total of nine LCPs are selected. The selected LCPs that go through a series of practical courses like a GIS program have a lot of professional opinions and are expected to secure objectivity of landscape assessment.

• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.909-914
• /
• 2008

This study investigated microbial populations and the sensory quality of sikhae including globefish (GLS), flounder (FLS), gastropods (GAS) and whelks (WHS) during storage at 4C for 16 d following fermentation at 10C for 4 d. General bacterial numbers increased to 102 in GLS and FLS, and to 1045 in WHS and GAS after the 20 d fermentation/storage period. Lactic acid bacteria increased to 108 log cycle in GLS and FLS after 10 d ripening time, and reached this level in GAS and WHS after 15 d and 20 d, respectively. After 20 days the number of lactic acid bacteria in each of the four samples was 108. There were 104105 yeast cells/g in each of the four samples after 20 d. The number of Leuconostoc increased to over 108 log cycle after 10 d in GLS and FLS, and 15 days in GAS for WHS the increase was to 107 log cycle. The pH values of GLS, FLS, GAS and WHS 4.42, 4.56, 4.31 and pH 4.26, respectively. The Sikhae acidity for all four samples ranged from 1.551.85%. From the sensory evaluation the overall acceptability was in the order of FLS > GLS > GAS > WHS.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.142-162
• /
• 2015

The purpose of this study are to provide the basic data materials and implementations for successful performance of electric-work field representatives of South Korean firms by identifying their roles and competency and examining their educational need. For this research purposes, three phased analysis was followed on: (1) the roles of electric-work field representatives, (2) competency of electric-work field representatives and (3) educational need for their competency. This research method was to conduct a focus group interview for 10 expert field representatives along with survey. The collected data materials were processed by MS Excel and SPSS 21.0 for statistical analysis including average, standard deviation and other basic statistics; the gap in awareness of field representatives; and need values. For the needs analysis, the difference between significance of field representatives' competency and current status was examined by t test. And the awareness gap between competency importance and current status was identified based on the Borich equation. The Locus for Focus model was employed herein to identify the kinds of competency with high importance and high inconsistency to prioritize. As a result, this research has found as follows: first, the roles of field representatives were found to be in 13 different kinds of roles. Second, electric-work field representatives were found to need to have 16 different skills. Third, regarding the 16 abilities, the gap between current status and significance was analyzed herein. The results showed statistically significant differences in all cases. The Borich needs analysis found the first required ability was communication ability followed by power of execution, conflict management ability, analytical thinking and time management ability. Also, the results of Locus for Focus model analysis displayed that the first quadrant(HH) included 7 highly-demanded abilities of communication ability, analytical thinking, decision making ability, specialty, time management ability, power of execution and drive for work implementation. The top-priority group was found to have 5 items of communication ability, analytical thinking, time management ability, power of execution and drive for work implementation which were commonly seen in the Locus for Focus model outcomes. Based on these findings, this research could identify the roles and competency of electric-work field representatives and provide the basic data materials applicable to future personal management of electricity companies including recruitment, division of work, job description, evaluation, etc. Also this research offered guidelines on demanded abilities in the field and where to place priority. The kinds of abilities with high educational demand as found in this research must be considered in designing educational programs for the competency building of field representatives. This research is expected to provide useful information in developing such educational programs for field representatives.

• Journal of radiological science and technology
• /
• v.15 no.1
• /
• pp.65-78
• /
• 1992

Routine chest radiography is generally imaged by high voltage technique but some radiological technologists use low voltage for imaging. High voltage is usually said between $120\;kV{\sim}140\;kV$. Some RTs like using heavy filtration but others seldom like using it. However which is better for use calcium tungustate film screen system or ortho system and high contrast film or wide latitude c-type film for the exculusive use of chest radiography. We could not make a decision which is ideal method for use. In my opinion any method is not always exellent for chest radiography. In my experiments that I had at Kaken hospital in Japan last year I expect to keep the balance between image quality and diagnostic range and to reduce radiation dose for patients. My experiments are as follows. 1. We have looked into system characteristics(speed and contrast) in accordance with kVp($80{\sim}140$) and added filter($no{\sim}1/16\;VL$) in three screen film systems(BX3+CRONEX4, SRO750+MGH, SRO750+MGL). 2. We have looked into skin dose and film dose with same D=1.8 lung field density in accordance with kVp($80{\sim}140$) and added filter($no{\sim}1/16\;VL$) in three screen film systems. 3. We have compared with the evaluation between correlation of physical image quality(MTF) and optical diagnostic capability. Result are follows. 1. Speed of BX3+CRONEX4 became higher in accodance with kVp and thickness of filter but speed of ortho system was not as like regular system. Thicker filter diminished the speed over 100 kV range in SRO750+MGL. In case of SRO750+MGH speed of 1/16VL filter was looked into lower than speed of 1/4VL filter. Sensitivity of ortho system depends on tube voltage and added filter. 2. Skin dose has been detected $225\;{\mu}Gy{\sim}66\;{\mu}Gy$ in BX3+CRONEX4 from 80 kV, no filter to 140 kV, 1/16VL filter. SRO750+MGH could reduce the patient dose $1/2{\sim}1/3$ level in comparison to that of BX3+CRONEX4. 3. The higher kV was the worse MTF became the thicker filter was the worse MTF became too. MTF of BX3+CRONEX4 was detected better than MTF of SRO750+MGH but SRO750+MGH's optical detectability of small lesion in lung field came out better than that of BX3+CRONEX4. Conclusion Recently routine chest radiography is generally imaged by high voltage but it seems to be there are some questions in using of film screen combination. In high voltage chest radiography the subject contrast will come down that means latitude become wider. In this case if we select the low contrast film screen system(C or L type) the film contrast will fall down extremly and detectability of small lesion will be deteriorated. Wide latitude C, L type film has a merit of high detectability on mediastinum. Furthermore high contrast film screen system has the advantage to keep the high contrast in low density region as like mediastinum and heart shadow. Therefore in low subject contrast high voltage chest radiography we would rather choose the high contrast film screen system(H type) I think. From a view point of patient dose detectability of mediastinum and lung field. The optimum technical facter was found out 120 kV, 1/16VL filter : BX3+CRONEX4, 140 kV, 1/4VL filter : SRO750+MGH, 100 kV, 1/4VL filter : SRO750+MGL.