• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.63-75
• /
• 2016

For safe water supply, residual chlorine has to be maintained in tap-water above a certain level from drinking water treatment plants to the final tap-water end-point. However, according to the current literature, approximately 30-60% of residual chlorine is being lost during the whole water supply pathways. The losses of residual chlorine may have been attributed to the current tendency for water supply managers to reduce chlorine dosage in drinking water treatment plants, aqueous phase decomposition of residual chlorine in supply pipes, accelerated chlorine decomposition at a high temperature during summer, leakage or losses of residual chlorine from old water supply pipes, and disappearances of residual chlorine in water storage tanks. Because of these, it is difficult to rule out the possibility that residual chlorine concentrations become lower than a regulatory level. In addition, it is concerned that the regulatory satisfaction of residual chlorine in water storage tanks can not always be guaranteed by using the current design method in which only storage capacity and/or hydraulic retention time are simply used as design factors, without considering other physico-chemical processes involved in chlorine disappearances in water storage tank. To circumvent the limitations of the current design method, mathematical models for aqueous chlorine decomposition, sorption of chlorine into wall surface, and mass-transfer into air-phase via evaporation were selected from literature, and residual chlorine reduction behavior in water storage tanks was numerically simulated. The model simulation revealed that the major factors influencing residual chlorine disappearances in water storage tanks are the water quality (organic pollutant concentration) of tap-water entering into a storage tank, the hydraulic dispersion developed by inflow of tap-water into a water storage tank, and sorption capacity onto the wall of a water storage tank. The findings from his work provide useful information in developing novel design and technology for minimizing residual chlorine disappearances in water storage tanks.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.167-175
• /
• 2014

This study was conducted to quantify a carbon budget of major vegetation types established in the campus of the National Institute of Ecology (NIE). Carbon budget was measured for Pinus thunbergii and Castanea crenata stands as the existing vegetation. Net Primary Productivity (NPP) was determined by applying allometric method and soil respiration was measured by EGM-4. Heterotrophic respiration was calculated as 55% of total respiration based on the existing results. Net Ecosystem Production (NEP) was determined by the difference between NPP and heterotrophic respiration (HR). NPPs of P. thunbergii and C. crenata stands were shown in $4.9ton\;C\;ha^{-1}yr^{-1}$ and $5.3ton\;C\;ha^{-1}yr^{-1}$, respectively. Heterotrophic respirations of P. thunbergii and C. crenata stands were shown in $2.4ton\;C\;ha^{-1}yr^{-1}$ and $3.5ton\;C\;ha^{-1}yr^{-1}$, respectively. NEPs of P. thunbergii and C. crenata stands were shown in $2.5ton\;C\;ha^{-1}yr^{-1}$ and $1.8ton\;C\;ha^{-1}yr^{-1}$, respectively. Carbon absorption capacity for the whole set of vegetation types established in the NIE was estimated by applying NEP indices obtained from current study and extrapolating NEP indices from existing studies. The value was shown in $147.6ton\;C\;ha^{-1}yr^{-1}$ and it was calculated as $541.2ton\;CO_2ha^{-1}yr^{-1}$ converted into $CO_2$. This function corresponds to 62% of carbon emission from energy that NIE uses for operation of various facilities including the glass domes known in Ecorium. This carbon offset capacity corresponds to about five times of them of the whole national territory of Korea and the representative rural area, Seocheongun. Considered the fact that ongoing climate change was originated from imbalance of carbon budget at the global level, it is expected that evaluation on carbon budget in the spatial dimension reflected land use pattern could provide us baseline information being required to solve fundamentally climate change problem.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.103-111
• /
• 2008

This study was carried out to investigate the optimal application rate and time of mixed expeller cake (MEC) for the replacement of chemical fertilizer. Dongjin-1, as cultivated rice was used at Fluvio-marine deposit in Honam plain paddy field. Soil chemical properties were improved by the application of MEC. Contents of total nitrogen and organic matter were higher in 70%, 100% plots of basal dressing than standard fertilizer application (SFA) plot. Cation exchangeable capacity was highly increased in 70% plot of basal dressing. Also, the content of organic matter in soil was increased with MEC application. Cation exchangeable capacity, total nitrogen and available phosphate were decreased according to late application time. The content of inorganic nitrogen in soil showed high tendency at more application rate of MEC, and nitrogen mineralization at harvest season have finished in 50%, 70% plots of basal dressing. The content of inorganic nitrogen in soil was increased according to late application time, however it was decreased in the late period of growth. Leaf color value became darker with increased application rate of MEC. Leaf color was dark green in MEC application plots at panicle formation stage, on the other hand, it was light green in 50%, 70% plots of basal dressing at heading stage. SPAD reading value of leaf-color was high during the whole growth stage in MEC application plots. More application rate of MEC showed higher tendency of fertilizer nitrogen absorption. Nitrogen use efficiency was the highest in 70% plot of basal dressing. Absorbed amount of fertilized nitrogen was increased in 10~15days before transplanting and nitrogen use efficiency was high according to the late application time. The ratio of perfect kernel and the content of protein on hulled rice showed high tendency at the less application rate of MEC. The ratio of head rice on milled rice showed high tendency at the less application rate of MEC. Rice yield increased 4% in 100% and 70% plots of basal dressing compare with SFA ($5.18Mg\;ha^{-1}$) plot respectively. Ear and culm length of rice were long according to the late application time, while the numbers of spikelet and ear were increased and the percentage of ripened grain was decreased. Rice yield was increased 2~5% in all MEC application plots compared to SFA plot and especially, increased 10~15days before transplanting in application plots. The optimal application rate and time of MEC on normal paddy field in plain were concluded that 70% basal dressing and 10~15days before transplanting

• Ecology and Resilient Infrastructure
• /
• v.9 no.4
• /
• pp.259-268
• /
• 2022

In this study, seeds of Festuca ovina var. coreana growing in waste coal landfills exposed to heavy metal contamination for a long time were collected, and growth characteristics and heavy metal accumulation capacity were evaluated through greenhouse cultivation experiments with germinated seedlings, and was conducted for the applicability of phytoremediation technology. Concentration gradients of arsenic-treated artificial soil were 25, 62.5, 125, and 250 mg/kg, respectively, lead concentrations were 200, 500, 1000, and 2000 mg/kg, and cadmium concentrations were 15, 30, 60, and 100 mg/kg, respectively In the arsenic, lead, and cadmium-treated experimental groups, the number of leaves of F. ovina var. coreana decreased in all compared to the control group except for the lead-treated groups (200, 500, and 1000 mg/kg). Length growth of the shoot part was increased in all of the arsenic treatment groups compared to the control group, but decreased in all of the root parts. In the 1000 and 2000 mg/kg lead treatment groups, lengths increased compared to the control group, but in the other treatments, they were shorter than the control group. In the case of the cadmium treatment group, all of the shoot parts were increased compared to the control group, and all of the root parts were decreased. In the case of arsenic treatment, the biomass was decreased at all parts and all concentrations compared to the control group. The 200, 500, and 1000 mg/kg lead treatments showed larger biomass than the control group in both shoot and root parts. In the cadmium treatment group, the biomass of both shoot and root parts decreased compared to the control group. As the concentration of heavy metal treatment increased, both the number of leaves and the biomass by plant parts tended to decrease, and the length growth of the shoot part tended to increase slightly, but the root part tended to decrease slightly. The arsenic accumulation concentrations of the shoot and root parts of the 62.5 mg/kg arsenic treatment area were 9.4 mg/kg and 253.3 mg/kg, respectively. While the shoot part of the 250 mg/kg arsenic treatment area withered away, the arsenic accumulation concentration in the root part was analyzed to be 859.1 mg/kg, In the 2,000 mg/kg lead treatment area, the shoot and root parts accumulated 10,308.1 and 11,012.0 mg/kg, which were 1.1 times higher than the root parts. At 100 mg/kg cadmium treatment, the shoot and root parts were 176.0 and 287.2 mg/kg, and the root part accumulated 1.6 times higher than the shoot part. As a result of tolerance evaluation of F. ovina var. coreana, multi-tolerance to three heavy metals was confirmed by maintaining growth without dying in all treatment groups of arsenic, lead, and cadmium. Plant extraction (phytoextraction) of F. ovina var. coreana was verified as a species that can be applied up to 2,000 mg/kg of soil lead contamination.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.481-493
• /
• 2023

In high-density urban areas, the urban heat island effect increases urban temperatures, leading to negative impacts such as worsened air pollution, increased cooling energy consumption, and increased greenhouse gas emissions. In urban environments where it is difficult to secure additional green spaces, rooftop greening is an efficient greenhouse gas reduction strategy. In this study, we not only analyzed the current status of the urban heat island effect but also utilized high-resolution satellite data and spatial information to estimate the available rooftop greening area within the study area. We evaluated the mitigation effect of the urban heat island phenomenon and carbon sequestration capacity through temperature predictions resulting from rooftop greening. To achieve this, we utilized WorldView-2 satellite data to classify land cover in the urban heat island areas of Busan city. We developed a prediction model for temperature changes before and after rooftop greening using machine learning techniques. To assess the degree of urban heat island mitigation due to changes in rooftop greening areas, we constructed a temperature change prediction model with temperature as the dependent variable using the random forest technique. In this process, we built a multiple regression model to derive high-resolution land surface temperatures for training data using Google Earth Engine, combining Landsat-8 and Sentinel-2 satellite data. Additionally, we evaluated carbon sequestration based on rooftop greening areas using a carbon absorption capacity per plant. The results of this study suggest that the developed satellite-based urban heat island assessment and temperature change prediction technology using Random Forest models can be applied to urban heat island-vulnerable areas with potential for expansion.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2023

This batch experiment was conducted to investigate the patterns of major plant nutrients in the leachates from the soil that was incorporated with rice hull biochar adjusted pH with dry fish powder utilizing rice hull biochar for loading the soil microorganisms. The rice hull biochar adjusted pH between 6.0 and 7.0, and the mixture ratio of rice hull biochar and dry fish powder was 4:6. The treatments consisted of three; the soil incorporated with rice hull biochar non-adjusted pH with dry fish powder as control (RB + DF), the soil incorporated with rice hull biochar adjusted pH by pyroligneous acid solution and dry fish powder (RBP+DF), and the soil incorporated with rice hull biochar adjusted pH by citric acid solution and dry fish powder (RBC+DF). NH₄-N, NO₃-N, PO₄-P, and K concentrations in the leachates were analyzed during incubation. The accumulated NH₄-N and PO₄-P concentrations in the leachates from the RBC+DF treatment were the highest during leaching periods. The highest accumulated NO₃-N and K concentrations in the leachates from the RBP+DF treatment were observed. It observed that NH₄-N and PO₄-P were more released in the adjusted citric acid solution, but NO₃-N and K were less released than those in the pyroligneous acid solution due to their low absorption capacity. Furthermore, it is necessary to investigate crop growth responses to the soil incorporated with adjusted pH rice hull biochar and dry fish powder for loading soil microorganisms.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.136-144
• /
• 1978

A series of experiments over three years was planned for practical application of rhizobia in farms and grass lands in Korea. This is the report for the studies of the first year mainly on the isolation and characterization of rhizobial strains, and on the assessment of their nodulation abilities and nitrogen fixation capacities. 1. Total number of 88 strains for soybean group and 22 st ra ins for pea and vetch group was isolated from nodules which were taken from legumes grown in Daekwanyong, Cheju and various places in Korea. 2. Morphological and cultural characteristics of the strains were studied, and attempts were also made to investigate their antigenic properties and to demonstrate lysogenic strains in these groups. The results were : i) the isolates varied in cultural characteristics on yeast mannitol broth and agar, and in degree of congo reel absorption ; ii) similarities in their antigenic properties were found between/among the strains: G-3/G-9/D216, G-20/G-52 in soybean group; iii) no lysogeny was found in the strains of these groups. 3. Plant infection tests by test tube and bottle method in light room were carried out to elucidate the ability of the strains to nodulate specific legumes and of the capacity of such nodules to fix atmospheric nitrogen. The isolates were grouped into non- invasive, ineffective, or effective to the legumes. Those strains which produced effective nodules, supporting similar level of growth as nitrate control, were: P-3, 4 and 8 in pea and vetch group; G-23, 27, and, D-216 in soybean group.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.4
• /
• pp.341-348
• /
• 2005

The quality characteristics of bread added with the levels of $0\%,\;1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were investigated. Mixing water absorption capacity was increased by increasing amounts of prickly pear powder. Mixing time of dough was increased compared to that of wheat flour by added prickly pear powder, while it decreased as prickly pear powder content increased. Dough stability of wheat flour added with $1.0\%$ prickly pear powder was similar to wheat flour dough, while decreased by increasing amount of prickly pear powder at the range of $2.0\~4.0\%$. Pasting temperature($66.1\~66.9^{\circ}C$) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder was lower($67.8^{\circ}C$) than that of wheat flour. Peak viscosity($2,226\~2,375$ cp) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were higher(2,288 cp) than control, and increased with increasing amount of prickly pear powder Setback($797\~750$ cp) of wheat flour added with $1.0\%,\;2.0\%\;3.0\%\;and\;4.0\%$ prickly pear powder were lower(803 cp) than that of wheat flour, and decreased with increasing amount of prickly pear powder. The volume of dough added with prickly pear powder decreased compared to that of the wheat dough. The specific loaf volume of bread added with prickly pear powder decreased($8.0\~18.5\%$) compared to that of the wheat bread. Color of crumb was deep red gradually with the increasing amount of substituted prickly pear powder. Hardness, adhesiveness, gumminess and chewiness of bread were increased gradually with the increasing amount of substituted prickly pear powder but the springiness was decreased. The sensory evaluation showed that bread of wheat flour added with $2.0\%$ prickly pew powder was superiority than the wheat flour bread.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.