• Journal of the Korean GEO-environmental Society
• /
• v.23 no.11
• /
• pp.5-11
• /
• 2022

The objective of this study is to evaluate the mechanical properties of high-flowable retaining wall material (RWM) incorporated with ground granulated blast-furnace slag (SG) and steel fiber (SF) based on a comparison with those of ordinary portland cement (OPC). To produce the specimens of RWM, some chemical agents such as superplasticizer (SP), air-entrained agent (AEA) and viscosity modifying agent (VMA) are added in the fresh RWM. The compressive, split tensile and flexural strength measurements were performed on the hardened RWM specimens. Additionally, surface electric resistivity and absorption tests according to ASTM standards were carried out at predetermined periods after water curing. It was found that the mechanical properties of slag cement concrete (SGC) RWM mix are better than those ordinary portland cement concrete (OPC) RWM mix. The effect of SF is remarkable to improve the mechanical properties of RWM mixes. It is noted that the usage of SG shows a beneficial effect to resist water penetration as well as long-term strength development of RWM mixes.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.344-349
• /
• 2022

A compact LPDA antenna consisting of right triangle-shaped dipole elements appended with strips is proposed for UWB applications. First, right triangle-shaped dipole elements are used instead of conventional strip dipole elements to reduce the width of the LPDA antenna. Second, the spacing between the LPDA elements is decreased to reduce the length of the LPDA antenna. Finally, strips are appended at the ends of the right triangle-shaped dipole elements in order to further reduce the width of the antenna. A prototype of the proposed antenna with 16 elements and gain > 4 dBi is fabricated on an FR4 substrate with dimensions of 44 mm×30 mm. Measured frequency band of the fabricated antenna is 2.99-14.76 GHz for a VSWR < 2, which ensures UWB operation, and measured gain range is 4.0-5.5 dBi with a front-to-back ratio larger than 10 dB. The length and width of the proposed compact LPDA antenna are reduced by 40.9% and 20.6%, respectively, compared to the conventional LPDA.

• Analytical Science and Technology
• /
• v.35 no.5
• /
• pp.212-217
• /
• 2022

In this study, ozone (O₃) samples were prepared for investigating the heterogeneous reactions between O₃ and tropospheric aerosols and were characterized by spectroscopic methods. O₃ generated from an ozone generator was purified by selective adsorption on refrigerated silica gel, followed by transfer to a sample bulb. The amount of UV light (λ = 256 nm) absorbed by O₃ was measured as a function of time at two different temperatures (room temperature and 50 ℃) and under different irradiation conditions. A correlation plot of 1/[O₃] versus time showed that O₃ decomposition follows the 2^nd order reaction rate under a steady-state approximation. The initial concentration of O₃, observed rate constants (k_obs), and the half-life of O₃ in the sample stored at room temperature were determined to be 2.74 [±0.14] × 10¹⁶ molecules·cm^-3, 4.47 [±0.64] × 10^-23 molecules^-1·cm³·s^-1, and 9.5 [±1.4] days, respectively. The evaluation of O₃ stability under various conditions indicated that special care should be taken to prevent the exposure of the O₃ samples to hightemperature environment and/or UV radiation. This study established a protocol for the preparation of highly purified O₃ samples and confirmed that the O₃ samples can be stored for a day after preparation for further experiments.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.9
• /
• pp.1146-1153
• /
• 2022

Many probiotic species have been used as a fermentation starter for manufacturing functional food materials. We have isolated Bifidobacterium animalis subsp. lactis LDTM 8102 from the feces of infants as a novel strain for fermentation. While Glycine max has been known to display various bioactivities including anti-oxidant, anti-skin aging, and anti-cancer effects, the immune-modulatory effect of Glycine max has not been reported. In the current study, we have discovered that the extract of Glycine max fermented with B. animalis subsp. lactis LDTM 8102 (GFB 8102), could exert immuno-modulatory properties. GFB 8102 treatment increased the production of immune-stimulatory cytokines in RAW264.7 macrophages without any noticeable cytotoxicity. Analysis of the molecular mechanism revealed that GFB 8102 could upregulate MAPK2K and MAPK signaling pathways including ERK, p38, and JNK. GFB 8102 also increased the proliferation rate of splenocytes isolated from mice. In an animal study, administration of GFB 8102 partially recovered cyclophosphamide-mediated reduction in thymus and spleen weight. Moreover, splenocytes from the GFB 8102-treated group exhibited increased TNF-α, IL-6, and IL-1β production. Based on these findings, GFB 8102 could be a promising functional food material for enhancing immune function.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.281-288
• /
• 2022

This study quantitatively analyzed the human casualties that can occur when a multicopter-type Urban Air Mobility (UAM) with a weight of about 1 ton and a speed of about 100 km/h falls in an urban area. Based on the population density and building database in Seoul, the population exposed to collisions in the event of a UAM crash was derived. Through the ballistic descent model, the accident impact radius of the UAM fall was calculated. In addition, the change in human casualties on the ground was analyzed when the accident impact radius increased. Finally, the ground risk map was created for Seoul, and it was confirmed that about 1 to 10 people could be injured when a UAM crash.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.211-218
• /
• 2022

Coal ash is being considered as a source of silica and alumina for cement clinker. The purpose of this study was to investigate the effect on cement clinker sintering by confirming the high-temperature microstructural change according to the firing temperature in the cement clinker sintering process of coal ash. In the coal ash used as a raw material for cement clinker, the shape change of the particle surface was confirmed from the sintering tem perature of 950 ℃. The shape of the coal ash disappeared from the sintering temperature higher than 1250 ℃. It was confirmed that the Al and Fe components of the coal ash were converted to the cement interstitial phase at a temperature higher than 1350 ℃. In addition, the clinker using a large amount of coal ash as a raw material showed a low content of Lime and a high content of Belite in the sintering tem perature range of 1150~1200 ℃. From this, it was confirmed that the formation of calcium silicate mineral proceeds more easily at the initial sintering temperature by the application of coal ash.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.350-357
• /
• 2022

With the recent prediction of 'Cycle 25', the importance of space weather research increases. Accordingly, the World Radiocommunication Conference (WRC)-23 has adopted Agenda Item 9.1a) and carried out sharing researches between active/passive space weather observation systems and existing services. Therefore, in this paper, in order to increase the precision of space weather environment data and secure the frequency spectrum for observation systems, the direct interference effect from the weather radar in Gosan, Jeju on the space weather observation receiver in Hallim, Jeju, and the indirect interference on the observation receiver by diffraction and scattering from the radar target have been analyzed. As a result, it can be known that the radar direction, the propagation direction diffracted and scattered from the target, and the Rradar Cross Section (RCS) of the radar target, the reception area of the space weather observation antenna, and the antenna off-boresight are important parameters for the interference effect analysis.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.209-217
• /
• 2022

In the present study, in order to prevent the misrun defects that occur during traditional brass casting, a method for selecting the proper casting process conditions is proposed. A learning model was developed and demonstrated to be able to learn the presence or absence of defects according to the casting process conditions and to predict the occurrence of defects depending on the certain process given. Appropriate process conditions were determined by applying the proposed method, and the determined conditions were verified through a comparison of different simulation results with additional conditions. With this method, it is possible to determine the casting process conditions that will prevent defects in the desired sand model. This technology is expected to contribute to realization of smart traditional brass farming workshops.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.249-260
• /
• 2022

Student pilots receiving flight education are inexperienced in piloting and situation judgment skills and are greatly affected by various factors such as psychological, physical, and environmental factors. In particular, one of the most influential factors in the flight education of student pilots is the weather conditions. Unlike large aircraft used in the air transportation business, small aircraft used for flight education have a great impact on education, such as flight restrictions depending on weather conditions, psychological pressure in severe weather, and deterioration of student skills. Therefore, in this study, the meteorological characteristics of meteorological factors that have a great influence on small aircraft were analyzed. As a result of the analysis, an efficient and safe training operation method was suggested to a professional pilot aviation training organization through the adjustment of the training period for the season, the increase in aircraft operation rate, and a safe solo flight plan considering the weather.

• Journal of Information Technology Services
• /
• v.21 no.4
• /
• pp.27-61
• /
• 2022

In order to improve project performance by analyzing the effects of the project manager's leadership competency and the individual competency of the project participants on the project performance, this study examines the effect. In this study, a research model and hypothesis were established to understand the causal relationship between leadership competency, individual competency, and project performance, and a survey was conducted based on this. Overall, it was found that the leadership competency of the project manager and the individual competency of the project participants had a positive effect on the project management performance, the project leadership competency had a positive effect on the completion performance, and the project participant individual competency had a negative effect on the completion performance. As a result of analyzing the effect of the project manager's core competency on the project management performance according to the amount or period of the project type, which is the moderating variable, it was found that there was no moderating effect on the management performance. For the success of the SI project, it is most important to understand the project characteristics well and select a PM suitable for the characteristics, and methods for nurturing excellent project managers should be further studied. In addition, it is expected that it will be possible to identify the effect of project manager leadership competency and participant competency on project performance based on sophisticated research design for more competent PM selection.