• Safety and Health at Work
• /
• 제14권1호
• /
• pp.124-130
• /
• 2023

The increase in the number of fatal electric accidents over the years has escalated the demand for specialized forensic engineers to determine their relevant technical causes. Likewise, the complexities associated with identifying the causes of electrocution accidents have prompted the General Department of Forensic Science and Criminology at Dubai Police to adopt a new methodology to diagnose electrocution accidents, consisting of an approach that involves medico-legal examination, electrical diagnosis of the evidence, and trace evidence analysis. This paper will discuss the application of the adopted method in further detail by unfolding two case reports. The first report outlines a case in which a worker got electrocuted at a construction site while attempting to turn on a lamp. The second case report involves the death of a technician in a workshop after trying to disconnect a washing machine from its plug. The methodology was utilized during the investigation of both cases, which were attended by the appointed forensic engineers and showed promising results.

• 대한전자공학회논문지TE
• /
• 제37권4호
• /
• pp.1-10
• /
• 2000

본 논문은 현재 적용되는 교환시스템과 유 ${\cdot}$ 무선통신시스템을 이용하여 교육용 트리(tree) 통신망을 구현하였다. 또한 구현된 통신망 프로그램을 이용한 현장 적응력을 강화할 수 있는 디지털 전전자교환교육, 네트워크 실무, 광전송 실험에 관련된 통신망 실습 교육방법을 개발하였다. 구현된 통신망을 구성하는 장비와 관련된 기술설명서, 사용설명서 및 유지 보수 기술정보를 수집하여 오라클 DB를 통해 관련 정보를 유효한 교육정보로 이용할 수 있도록 하였다.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.26-32
• /
• 2009

As a part of utilizing the nanocellulose (NC) from lignocellulosic components of wood biomass, this paper reports preliminary results on the products of sulfuric acid hydrolysis. The purpose of this study was to investigate the morphology of both NC and micro-sized cellulose fiber (MCF) isolated by acid hydrolysis from commercial microcrystalline cellulose (MCC). Field emission.scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to observe the acid hydrolysis suspension, NC, and MCF. The electron microscopy observations showed that the acid hydrolysis suspension, before separation into NC and MCF by centrifugation, was composed of nano-sized NCs and micro-sized MCFs. The morphology of isolated NCs was a whisker form of rod-like NCs. Measurements of individual NCs using TEM indicated dimensions of 6.96$\pm$0.87 nm wide by 178$\pm$55 nm long. Observations of the MCFs showed that most of the MCC particles had de-fibered into relatively long fibers with a diameter of 3-9 ${\mu}m$, depending on the degree of acid hydrolysis. These results suggest that proper technologies are required to effectively realize the potentials of both NCs and MCFs.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.119-125
• /
• 2009

Corrosion assessment has a number of uses but the use considered here is as a precursor to Risk-Based Inspection (RBI) planning. Systematic methods consisting of technical modules of RBI program were used to assess the effect of specific corrosion mechanism on the probability of failure in equipments of petrochemical plants. Especially in part of the damage and corrosion assessment, screening step involved evaluating the combinations of process conditions and construction materials for each equipment item in order to determine which damage mechanisms are potentially active. For general internal corrosion, either API 510 or API 570 was applied as the damage rate in the calculation to determine the remaining life and inspection frequency. In some cases, a measured rate of corrosion may not be available. The technical modules of RBI program employ default values for corrosion, typically derived from published data or from experience with similar processes, for use until inspection results are available. This paper describes the case study of corrosion and damage assessment by using RBI methodology in petrochemical plant. Specifically, this paper reports the methodology and the results of its application to the petrochemical units using the $KGS-RBI^{TM}$ program, developed by the Korea Gas Safety Corporation to suit Korean situation in conformity with API 581 Codes.

• 펄프종이기술
• /
• 제29권4호
• /
• pp.53-63
• /
• 1997

Most cellulose resources come from the higher plants, but bacteria also synthesize same cellulose as in plants. Many scientists have been widely studied on the bacterial cellulose, the process development, manufacturing, even marketing of cellulose fibers. The bacterial celluloses are very different in its physical and morphological structures. These fibers have many unique properties that are potentially and commercially beneficial. The fine fibers can produce a smooth paper with enchanced its strength property. But there gave been few reports on the mechanical properties of the processing of bacterial cellulose into structural materials. This study were performed to elucidate the mechanical properties of sheets prepared from bacterial cellulose. Also reinforcing effect of bacterial cellulose on the conventional pulp paper as well as surface structures by scanning electron microscopy were discussed. Paper made from bacterial cellulose is 10 times much stronger than ordinary chemical pulp sheet, and the mixing of bacterial cellulose has a remarkable reinforcing effect on the papers. Mechanical strengthes were increased with the increase of bacterial cellulose content in the sheet. This strength increase corresponds to the increasing water retention value and sheet density with the increase of bacterial cellulose content. Scanning electron micrographs were shown that fine microfibrills of bacterial celluloses covered on the surfaces of hardwood pulp fibers, and enhanced sheet strength by its intimate fiber bonding.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.74-81
• /
• 2008

The writing brush, ink stick, paper, and ink stone were the four precious things of the studying and recording in oriental world until even nowaday. The oriental paper was comparatively well evaluated in many papers and reviews, but it is difficult to find some scientific reports or reviews about the ink stick. In this paper, the scientific aspect of ink sticks of oriental maine three country(Korea, China, Japan) were evaluated by the physical, chemical and microscopic analysis. The result could summarized as fellows; 1. The Korean lampblack ink stick contains more carbon and less nitrogen and the Chinese ink sticks contain less carbon and more oxygen. 2. The Korean lampblack and cowhide glue contain relatively higher amount of sulphur. 3. The particle size distribution of carbon in the ink stick was not change after grinding in the ink stone. 4. The particle size of carbon and the pore size in the charcoal ink sticks of three country were larger than those of the lampblack ink sticks. 5. The ink solution of the charcoal ink sticks shows high roundness on Hanji while the ink solution of the lampblack ink sticks is spread readily to Hanji surface. 6. The change of whiteness in printing of the ink sticks is notable in thermal treatment.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• Advances in concrete construction
• /
• 제7권2호
• /
• pp.65-74
• /
• 2019

This paper reports on the results of a parametric study, which examines the effects of varying aspect ratios on the dynamic response of cylindrical silos directly supported on the ground under earthquake loading. Previous research has shown that numerical models can provide considerably realistic simulations when it comes to the behavior of silos by using correct boundary conditions, appropriate element types and material models. To this end, a three dimensional numerical model, taking into account the bulk material-silo wall interaction, was produced by the ANSYS commercial program, which is in turn based on the finite element method. The results obtained from the numerical analysis are discussed comparatively in terms of dynamic material pressure, horizontal displacement, equivalent base shear force and equivalent bending moment responses for considered aspect ratios. The effects experienced because of the slenderness of the silo in regards to the seismic response were evaluated along with the effectiveness of the classification system proposed by Eurocode in evaluating the loads on the vertical walls. Results clearly show that slenderness directly affects the seismic response of such structures especially in terms of behavior and the magnitude of the responses. Furthermore the aspect ratio value of 2.0, given as a behavioral changing limit in the technical literature, can be used as a valid limit for seismic behavior.

• 한국안전학회지
• /
• 제37권3호
• /
• pp.9-15
• /
• 2022

The analysis of the causes of accidents in workplaces where machines and tools are used is essential to improve the effectiveness and efficiency of safety prevention policies in places of employment in Korea. The causes of workplace accidents are not fully understood mainly due to difficulties in analyzing available descriptive information. This study focuses on the automated accident cause analysis in workplaces based on the accident abstracts found in industrial accident reports written in an unstructured descriptive format. The method proposed in this paper is based on text data mining and uses the keyword search function of Excel software to automate the analysis. The analysis results indicate that the primary reason for the frequency of accidents is related to technical aspects at a stage in which dangerous situations occur in the workplace. Accidents due to managerial causes are typically observed when danger exists in the workplace; however, managerial actions play a more important role in reducing accident severity. A small company tends to use unsafe machines and devices, leading to further accidents due to technical causes, whereas managerial causes are more conspicuous as the company grows. To preclude the occurrence of accidents due to inadequate knowledge, the implementation of safety management and the provision of safety education to elderly workers at the early stage of their employment are particularly important for small companies with less than 100 workers.

• 한국ITS학회 논문지
• /
• 제22권6호
• /
• pp.264-283
• /
• 2023

자율주행차량 사고는 일반차량 사고와 다르게 기술적 문제, 환경, 운전자와의 상호작용 등 다양한 요인에 기인한 사고 발생 가능성이 존재한다. 향후 자율주행 기술의 진보로 기존의 사고원인 이외에도 새로운 이슈들이 대두될 것으로 예상되며, 이에 대응하기 위한 다양한 시나리오 기반의 접근법이 필요하다. 본 연구에서는 자율주행 사고 리포트인, CA DMV collision report와 자율주행모드 해제 보고서인 Disengagement report, 자율주행 실제 사고영상을 수집하여 자율주행차량 교통사고 시나리오를 개발하였다. 시나리오는 ISO 26262의 기능안전 시스템 failure mode에 기반하여 도출되었으며, 자율주행 기능의 다양한 이슈를 반영하고자 하였다. 본 연구를 통해 도출된 자율주행차량 시나리오는 향후 다양한 자율주행차량 교통사고 예방과 대비에 기여할 뿐만 아니라 자율주행 기술의 안전성을 향상시키는 데 중요한 역할을 할 것으로 기대한다.