• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1449-1463
• /
• 2008

This paper considers three different models with two functional forms, Cobb-Douglas and Translog, for the stochastic frontier production function of food manufacturing industry of Bangladesh over the period 1981-1982 to 1999-2000. The models are proposed by Battese and Coelli (1992, 1995) and Huang and Liu (1994). The technical efficiency, total factor productivity, technological change and technical efficiency change have been estimated in the frontier models. The results indicate that 41.47%, 59.30% and 70.98% of the potential output are being realized in this sector. The mean increments in total factor productivity are approximately 2%, 9% and 4% respectively.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1802-1812
• /
• 2016

Cross regulation is a key technical issue of single-inductor multiple-output (SIMO) DC-DC converters. This paper investigates the cross regulation in single-inductor dual-output (SIDO) Buck converters with continuous conduction mode (CCM) operation. The expressions of the DC voltage gain, control to the output transfer function, cross regulation transfer function, cross coupled transfer function and impedance transfer function of the converter are presented by the time averaging equivalent circuit approach. A small signal model of a SIDO CCM Buck converter is built to analyze this cross regulation. The laws of cross regulation with respect to various load conditions are investigated. Simulation and experiment results verify the theoretical analysis. This study will be helpful for converter design to reduce the cross regulation. In addition, a control strategy to reduce cross regulation is performed.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.278-287
• /
• 2015

This paper proposes a novel voltage distortion approach for output filter design based on the voltage transfer function for both off-grid and grid-connected Pulse Width Modulation (PWM) Inverters. The method explained in detail is compared to conventional methods. A comparative analysis is performed on an example of L and LCL-filter design. Simulation and experimental results for the off-grid and the grid-connected single phase inverter prove our theoretical predictions. It was found that conventional methods define redundant values of the output filter elements. Assumptions and limitations of the proposed approach are also discussed.

• KDI Journal of Economic Policy
• /
• 제12권4호
• /
• pp.21-46
• /
• 1990

본 논문은 유승민(劉承旻) 이인찬(李仁燦)(1990)이 추정한 우리나라 제조업(製造業)의 기술적(技術的) 효율성(效率性)을 토대로 기술적(技術的) 효율성(效率性)의 산업적(産業的) 격차(隔差)를 설명하는 경험적 증거를 구하고 효율성 추정치의 동태적(動態的) 안정성(安定性)을 분석하였다. 분석결과 산업(産業)의 생산규모(生産規模)가 클수록, 생산특화도(生産特化度)가 높을수록, 자본(資本)-노동비율(勞動比率)의 이질성(異質性)이 낮을수록 높은 기술적(技術的) 효율성(效率性)을 나타내었다. 이러한 결과는 미국(美國) 일본(日本)의 경우에 대한 연구결과와 공통되는 것으로서 기술적(技術的) 효율성(效率性)과 산업조직특성간(産業組織特性間)의 관계가 경제규모나 발전단계의 차이에도 불구하고 가설(假說)의 일반성(一般性)을 지지한다는 점에서 중요한 의미를 지닌다. 기업집중률(企業集中率) 또한 기술적 효율성에 대하여 선형(線型)보다는 이차형(二次型)의 관계를 가지고 있으나 우리나라의 경우 기술적 효율성이 극대화되는 집중률(集中率)은 매우 높은 것으로 나타났다. 또한 본 논문은 효율성(效率性) 척도간(尺度間)의 선택문제에 대한 경험적 기준을 제시하였는데 부가가치액기준(附加價値額基準)보다는 생산액기준(生産額基準)으로 추정된 기술적(技術的) 효율성(效率性)이 제가설(諸假說)들과 잘 부합되는 결과를 나타내었다. 효율성의 동태적(動態的) 안정성(安定性)에 관한 시론적(試論的) 분석(分析)에 의하면 시간변화에 따른 효율성 추청치의 안정성은 효율성 척도간에 다소의 차이는 있으나 기대한 만큼 높지 않았다. 따라서 기술적 효율성의 동태적(動態的) 불안전요인(不安全要因)에 관한 설명은 연구과제로 남는다.

• 한국통신학회논문지
• /
• 제35권4A호
• /
• pp.341-349
• /
• 2010

본 논문은 차세대 이동통신 기술로 주목받고 있는 IEEE 802.16 기반의 Mobile WiMAX (또는 WiBro) 시스템에서 여러 가지 채널환경조건 및 기지국의 조건을 고려하여 기지국의 출력파워를 최적으로 설계하는 방법에 관한 것이다. 본 논문에서는 다양한 환경조건에서 Mobile WiMAX 시스템의 상/하향 링크버짓(link budget)을 산출하여, 이로부터 Mobile WiMAX 기지국의 최적 출력파워를 도출하는 방법에 대해 정리하였다. 본 논문에서는 MIMO(multiple input multiple output) 기술이 적용된 기존의 2Tx-2Rx 기지국과 여기에 수신단의 감도를 높이기 위해 수신단의 안테나 개수를 4개로 늘린 2Tx-4Rx 기지국과 성능을 향상시키기 위해 새롭게 빔포밍(beamforming) 기술이 적용된 4Tx-4Rx 기지국의 경우 등 총 세 가지 경우에 대하여 최적 출력파워를 도출하였다.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2249-2253
• /
• 2011

본 논문에서는 저전력 u-IT 기기의 기술 기준에 대한 현재 각국의 동향과 그 기준치를 분석 및 비교를 통하여 해당 대역의 국내기준의 문제점을 분석하였다. 전자파 적합 등록에서 제시하고 있는 각국의 출력기준 기준치와 연계하여 이에 적합한 국내의 u-IT 기기의 실질적인 도입 가능한 출력 기준의 기준치를 제시함을 목적으로 한다. 본 논문에서 제시한 출력 기준 허용치를 바탕으로 국내 기준을 상향하면 저전력 u-IT 기기의 보급과 발전에 기여할 것으로 예상되며 국내 통신 시장은 물론 국제 통신 시장에서 경쟁력을 갖출 수 있을 것으로 예상된다.

• 지역연구
• /
• 제15권3호
• /
• pp.1-13
• /
• 1999

Since the 1990's, the most important environmental issue on the earth is characterized by "global worming problem". The United Nations Framework Convention on Climate Change (UNFCCC) plays an significant role to solve this problem on a worldwide scale. The main purpose of this paper is to analyse the impact of $CO_2$ reduction on the Daegu regional economy through 1995 regional input-output coefficients derived from the 1995 national input coefficients table by using non-survey method. The sectoral impacts on output, income, and employment were computed under the decline-unequalized assumption in final demand influenced by $CO_2$ reduction. This article has six main sections. Section 1 is an introduction to this paper. Section 2 explains briefly the derivation method of the regional technical coefficients. Section 3 describes the model building through input-output multipliers. In section 4 regional data on output, income, employment and final demand are computed to estimate the regional impacts. Section 5 deals with impact analysis on the Daegu economy. Section 6 contains a brief summary and concludintg remarks. The research findings of this study can be summarized as follows. In 1995, under the assumption of 10% decrease on an average in final demand sectors, the economy of the region studied decreased \3600 billion of output, ￦1114 billion of income, and 49919 man-years of employment. The percent ratios of each value to the total showed 9.4%, 9.7%, and 9.2%, respectively. The dominant sectors associated with impact analysis within the region are chemicals and chemical products, paper, printing and publishing, and textiles and leather, etc; nevertheless, the least dominant sector is non-metallic mineral products. products.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.17-27
• /
• 2020

With the continuous development and application of Internet technology, in recent years, new technologies such as cloud computing, big data, the Internet of Things, and AI are becoming more and more familiar to the general public. The development of a digital society has entered a new period of development. In this paper, we used on the 2018 annual data of 50 listed companies with blockchain concept stocks in China. Using data envelopment analysis (DEA) to study and analyze the input-output efficiency, it can be concluded that the input-output efficiency of 50 listed companies is very different. Inefficient companies are as high as 62%. Most companies have a large room for improvement in input-output efficiency due to uneconomical scale or inefficient technology. In order to better improve the company's input-output efficiency, one must improve the efficiency of resource utilization, optimize the company's research and development costs and the input and management of technical personnel; the second is to increase technological innovation and business innovation.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.96-100
• /
• 2004

The Nd： YAG laser is commonly used throughout many fields such as accurate material processing, IC marking, semiconductor annealing, medical operation devices, etc., due to the fact that it has good thermal and mechanical properties and is easy to maintain. In materials processing, it is essential to vary the laser power density for specific materials. The laser power density can be mainly controlled by the current pulse width and pulse repetition rate. It is important to control the laser energy in those fields using a pulsed laser. In this paper we propose the constant-frequency current resonant half-bridge converter and monitoring of capacitor charging voltage. This laser power supply is designed and fabricated to have less switching loss, compact size, isolation with primary and secondary transformers, and detection of capacitor charging voltage. Also, the output stabilization characteristics of this Nd： YAG laser system are investigated. The test results are described as a function of laser output energy and flashlamp arc discharging constant. At the energy storage capacitor charges constant voltage, the laser output power is 2.3％ error range in 600[V].

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.46-49
• /
• 2007

Multiple Antenna Technologies such as Multiple-Input Multiple-Output (MIMO) and Beamforming provide the increase of channel capacity and the reliability of wireless link. To obtain these advantages, WiBro, Mobile WiMAX and $4^{th}$ Generation System are employing multiple antenna technologies. There exist, however, many technical issues in considering the application of the technologies or the providing of services using them. In this paper, various technical topics are discussed and simple solutions are proposed. Beamforming has several technical issues which include coverage imbalance, difficulties in providing Multicast-Broadcast Service (MBS). In Addition, network planning is a critical point from a cell extension and initial network entry point of view. In case of MIMO, network deployment is discussed in that cellular data network such as WiBro has many repeaters. MIMO mode selection for maximizing the cell capacity is also covered.