• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.417-425
• /
• 2020

최근의 무기체계 개발은 4차 산업 혁명과 연계하여 민간 상용기술의 우위 분야를 적극적으로 접목시켜 개별 상용 시스템들을 통합(SI) 개발하는 추세이다. 그러나, 이러한 상용품 기반 무기체계의 경우 소요 제안요청서(RFP)에 기술교범국방규격서를 적용한 기술교범 개발, 군직 야전정비용 지원장비, 전자식 기술교범(IETM), 전자식 교보재(CBT) 개발과 무기체계 RAM 목표값 및 국방규격품 수준의 군수지원분석(LSA) 등 전 분야에 걸친 ILS 요소개발이 요청되어 개발업체의 제안 범위의 현실성이 떨어지고 이와 연계된 개발을 소요 대비 과도하게 진행하고 있는 실정이다. 상용품 기반 SI 무기체계는 외주정비 시행의 기본 틀에서 소요군에 반드시 필요한 핵심요소로 한정시킨 ILS 개발과 PLS 방향 설정에 역점을 둔 소요요청서(RFP)와 계약 방식이 적용되어야 군과 개발업체 상호 보완 및 효과적인 운영유지를 위한 종합군수지원을 완성할 수 있을 것이다. 따라서 현 무기체계 운용실태 확인을 통해 상용품 기반 무기체계의 군수지원은 외주화를 기본 정책으로 선정하여 합리적 의사결정 과정을 통해 운영유지에 중점을 둔 개발 필요 요소를 결정하고 결정된 핵심요소에 대한 개발방안을 RFP에 적용하는 방안과 PLS를 위한 방안에 대해 본 논문에 제시하였다.

• 대한임상검사과학회지
• /
• 제49권4호
• /
• pp.382-389
• /
• 2017

임상 실험실에서의 망상 적혈구 계산은 현재 수동 및 자동으로 구분된다. 현미경에 의한 망상 적혈구 수 검사는 정확성의 결여, 낮은 재현성 등이 망상 적혈구 결과의 정확성에 문제가 있다. 또한, 자동 혈액 분석기의 유동 세포 계측법은 개발 도상국 및 소규모 실험실에서 비용 때문에 사용하기가 어렵다. 따라서 본 연구는 이러한 단점을 보완 할 수 있는 새로운 방법을 찾기 위해 노력했다. 이 연구의 목적은 분광 광도계로 염색 된 망상 적혈구 수를 비교하고 또한 분광 광도계 및 유동 세포 계측기의 통계를 분석하는 것이다. 동일한 8 개의 EDTA 샘플을 36 회 반복하여 분광 광도계와 유동 세포 계측기 사이의 일치도를 비교 하였다. 이 연구는 700~780 nm에서 600 배 희석 한 표본을 10 개의 차이로 측정하였다. 흡광도에 의한 710~730 파장은 표준 및 검사와 양의 상관 관계가 있으며(r=0.967, p<0.01), 변수에 대한 상관 관계를 나타내었다. 결과에 대한 회귀 분석결과 최적 희석 계수는 600 배였다. 따라서 본 연구는 자동 분광 광도계를 이용한 망상 적혈구 흡광도 측정에 대한 경제적인 기여 그리고 망상 적혈구 관련 빈혈에 대한 모니터링 시스템 등에 기여 할 수 있는 기술적 활용을 시도한 것이다. 따라서 더욱 광범위한 연구가 필요할 것으로 사료된다.

• 정보보호학회논문지
• /
• 제32권2호
• /
• pp.309-327
• /
• 2022

전(全) 산업 분야에서 ICT 융합화가 진행되고 공급망의 글로벌 생태조성이 가속화됨에 따라, 공급망 위험 또한 지속적으로 증가하고 있다. 특히, ICT 제품의 공급망은 관리해야 할 기술적·환경적 요인들이 매우 복잡하여, 전체 생명주기에 걸친 투명한 관리가 어렵다. 이에 미국·영국·EU 등 세계 주요국과 국제연합은 ICT 제품 공급망 대상의 사이버 공급망 보안 관련 연구와 정책을 수행·수립 중이다. 우리나라도 2019년 발표한 국가사이버안보전략의 기본계획 내에 주요 ICT 장비의 공급망 보안을 위한 관리체계를 구축하는 등 현안으로써 추진하고 있으나, 국가·공공기관을 위한 조직·기관 수준의 정책은 아직 부재한 상황이다. 본 논문에서는 미국의 사이버 공급망 보안 관리체계를 검토하여, 사이버 공급망 보안 관점의 우리나라 국가 정보보안 기본지침 보완방안을 제시한다. 이는 국내 정보보안 분야에서 도입 가능한 사이버 공급망 조치사항의 참고 자료가 될 것으로 기대한다.

• Journal of Acupuncture Research
• /
• 제35권2호
• /
• pp.81-87
• /
• 2018

Background: The purpose of the present study was to evaluate efficacy and patient satisfaction of acupuncture or Chuna therapy for back pain. Methods: Amongst all the patients with back pain who had been treated at Sun-cheon korean medicine hospital, Dong-shin university, only patients that had received either acupuncture or Chuna manual therapy between September 1 and October 31, 2017 were selected and their medical charts retrospectively analyzed. A questionnaire was used in the investigation that consisted of a numeric rating scale (NRS), the Oswestry low-back pain disability index (ODI), general, emotional, conversational, and technical satisfaction. The questionnaire was completed before treatment and at weekly intervals (approximately). Treatment efficacy was analyzed using the first and last questionnaires. The last questionnaire was also used to establish patient satisfaction. The data were analyzed using SPSS for Windows version 21.0. Results: The NRS, Current degree of pain (ODI-1), and total ODI were significantly decreased in both the acupuncture and Chuna groups. The differences in NRS, ODI-1, and total ODI changes between treatment groups were not significant. There were no statistically significant differences between the acupuncture and Chuna groups in terms of general, emotional, conversational, and technical satisfaction. Conclusion: Acupuncture treatment significantly reduces NRS and ODI in patients who have back pain without structural transformation, and Chuna therapy significantly reduces NRS and ODI-1 in patients who have back pain with structural transformation. These results indicate that further studies should be conducted in more patients and over a longer period.

• Safety and Health at Work
• /
• 제4권2호
• /
• pp.111-116
• /
• 2013

Background: The aim of this study was to evaluate the quality of the Second Korean Working Conditions Survey (KWCS), focusing on its validity and reliability. Methods: The external validity was evaluated by the assessment of sampling procedures and the response rate, in order to investigate the representativeness of the sample. The content validity was evaluated by the assessment of the development of the questionnaire, and the consistency of questions for the selected construct. The test-retest method was used to evaluate the reliability by means of a phone call survey of 30% of the respondents, who were randomly selected. The respondents' satisfaction regarding the survey procedures and interview time were analyzed to evaluate the quality of survey data. Results: The external validity was assured by an acceptable sampling procedure, rigid multi-stage stratified cluster random sampling. The content validity was also guaranteed by a reasonable procedure for the development of the questionnaire with a pretest. The internal consistency of the questions for work autonomy was maintained, with 0.738 of Cronbach's alpha. The response rate of 36% was lower than that of the European Working Conditions Survey (EWCS), with a contact rate of 66%, compared to 76% for the EWCS. The matching rates of the five retested questions were more than 98% reliable. Conclusion: The quality of the second KWCS was assured by the high external and content validity and reliability. The rigid sampling procedure and development of the questionnaire contributed to quality assurance. The high level of reliability may be guaranteed by the sophisticated field survey procedures and the development of a technical manual for interviewers. The technical strategies for a high response rate should be developed for future surveys.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.688-693
• /
• 2016

본 논문에서는 현재 고고도 이탈 및 저고도 개산강하(HALO, High Altitude Low Opening)용으로 사용하고 있는 군용 낙하산의 훈련 시뮬레이터 개발을 위해 필요한 낙하산 모델링 및 시뮬레이션 결과를 정리하였다. 대상인 군용 낙하산은 파라포일(Parafoil) 형태의 사각 낙하산으로 원형 낙하산과는 달리 강하자가 조종을 통해 원하는 위치로 유도할 수 있는 기동성이 뛰어나 공수부대원들의 적진 침투시에 주로 이용된다. 실재 낙하산의 형상자료를 이용하여 파라포일과 낙하물의 질점 모델을 기반으로 9-자유도 비선형 운동방정식을 유도하고, 각각의 관성모멘트와 공력 미계수를 산출하여 MATLAB/Simulink 기반의 비선형 시뮬레이션을 수행하여 그 결과를 나타내었다. 특히 낙하산과 같은 공기부양(LTA, Lighter-Than-Air) 비행체는 일반적인 항공기 비선형 운동과 달리 부가질량(Added Mass) 및 부가 관성모멘트(Added Moment of Inertia)의 효과가 크기 때문에 이에 대한 경험수식을 바탕으로 동역학 모델링에 포함하여 고려하였다. 수행된 낙하산 운동 모델링의 검증을 위해 비대칭 조종입력을 통한 나선형 강하 비행조건을 시뮬레이션하여 대상 군용 낙하산에서 제시된 실재 성능값과 시뮬레이션 결과치를 비교하여 유도된 운동모델이 타당함을 검증하고 그 결과를 나타내었다.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.893-906
• /
• 2017

Automatic large scale soil model generation is very critical stage for earthquake hazard simulation of urban areas. Manual model development may cause some data losses and may not be effective when there are too many data from different soil observations in a wide area. Geographic information systems (GIS) for storing and analyzing spatial data help scientists to generate better models automatically. Although the original soil observations were limited to soil profile data, the recent developments in mapping technology, interpolation methods, and remote sensing have provided advanced soil model developments. Together with advanced computational technology, it is possible to handle much larger volumes of data. The scientists may solve difficult problems of describing the spatial variation of soil. In this study, an algorithm is proposed for automatic three dimensional soil and velocity model development of southern part of the European side of Istanbul next to Sea of Marmara based on GIS data. In the proposed algorithm, firstly bedrock surface is generated from integration of geological and geophysical measurements. Then, layer surface contacts are integrated with data gathered in vertical borings, and interpolations are interpreted on sections between the borings automatically. Three dimensional underground geology model is prepared using boring data, geologic cross sections and formation base contours drawn in the light of these data. During the preparation of the model, classification studies are made based on formation models. Then, 3D velocity models are developed by using geophysical measurements such as refraction-microtremor, array microtremor and PS logging. The soil and velocity models are integrated and final soil model is obtained. All stages of this algorithm are carried out automatically in the selected urban area. The system directly reads the GIS soil data in the selected part of urban area and 3D soil model is automatically developed for large scale earthquake hazard simulation studies.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.74-85
• /
• 2007

During the lifecycle of a nuclear power plant many organizations are involved in KOREA. Korea Plant Engineering Co. (KOPEC) participates in the design stage, Korea Hydraulic and Nuclear Power (KHNP) operates and manages all nuclear power plants in KOREA, Dusan Heavy Industries manufactures the main equipment, and a construction company constructs the plant. Even though each organization has a digital data management system inside and obtains a certain level of automation, data sharing among organizations is poor. KHNP gets drawing and technical specifications from KOPEC in the form of paper. It results in manual re-work of definition and there are potential errors in the process. A data warehouse based on a neutral model has been constructed in order to make an information bridge between design and O&M phases. GPM(generic product model), a data model from Hitachi, Japan is addressed and extended in this study. GPM has a similar architecture with ISO 15926 "life cycle data for process plant". The extension is oriented to nuclear power plants. This paper introduces some of implementation results: 1) 2D piping and instrument diagram (P&ID) and 3D CAD model exchanges and their visualization; 2) Interface between GPM-based data warehouse and KHNP ERP system.

• Genomics & Informatics
• /
• 제18권2호
• /
• pp.16.1-16.5
• /
• 2020

There has been a dramatic increase in the popularity of utilizing social media data for research purposes within the biomedical community. In PubMed alone, there have been nearly 2,500 publication entries since 2014 that deal with analyzing social media data from Twitter and Reddit. However, the vast majority of those works do not share their code or data for replicating their studies. With minimal exceptions, the few that do, place the burden on the researcher to figure out how to fetch the data, how to best format their data, and how to create automatic and manual annotations on the acquired data. In order to address this pressing issue, we introduce the Social Media Mining Toolkit (SMMT), a suite of tools aimed to encapsulate the cumbersome details of acquiring, preprocessing, annotating and standardizing social media data. The purpose of our toolkit is for researchers to focus on answering research questions, and not the technical aspects of using social media data. By using a standard toolkit, researchers will be able to acquire, use, and release data in a consistent way that is transparent for everybody using the toolkit, hence, simplifying research reproducibility and accessibility in the social media domain.

• 산업공학
• /
• 제21권4호
• /
• pp.394-402
• /
• 2008

The objective of this paper is to design segmentation algorithm for applying the breast ultrasound image to CAD(Computer Aided Diagnosis). This study is conducted after understanding limits, used algorithm and demands of CAD system by interviewing with a medical doctor and analyzing related works based on a general CAD framework that is consisted of five step-establishment of plan, analysis of needs, design, implementation and test & maintenance. Detection function of CAD is accomplished by Canny algorithm and arithmetic operations for segmentation. In addition to, long computing time is solved by extracting ROI (Region Of Interests) and applying segmentation technical methods based morphology algorithm. Overall course of study is conducted by verification of medical doctor. And validity and verification are satisfied by medical doctor's confirmation. Moreover, manual segmentation of related works, restrictions on the number of tumor and dependency of image resolution etc. was solved. This study is utilized as a support system aided doctors' subjective diagnosis even though a lot of future studies is needed for entire application of CAD system.