• The Journal of Korean Society for Radiation Therapy
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2000

The accuracy of the target localization was evaluated by conventional and spiral CT in stereotactic radiosurgerv. Conventional and spiral CT images were obtained with geometrical phantom, which was designed to produce exact three-dimensional coordinates of several objects within 0.1mm error range. Geometrical phantom was attached by BRW headframe, intermediate head ring, and CT localizer. Twentv-seven slices of conventional CT image were scanned at 3 mm slice thickness. Spiral CT images were scanned at 3 mm slice thickness from the pitch value 1 to 3, and twenty-seven slices of image were obtained per each the pitch value. These CT images were transferred to a treatment planning system(X-knife, Radionics) by ethernet, Three-dimensional coordinates of these images measured from the treatment planning system were compared to known values of geometrical phantom. The mean localization error of the target localization of conventional CT was 1.4mm. In case of spiral CT, the error of the target localization was within 1.6mm from the pitch value 1 to 1.3, but was more than 30mm above the pitch value 1.5. In conclusion, as the localization error of spiral CT was increased in high pitch value compared to conventional CT, the application of spiral CT will be with caution in stereotactic radiosurgery.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.661-668
• /
• 2022

Various lean design and construction methods such as target value design, pull planning, value stream mapping have successfully transformed the commercial building construction industry into achieving improved productivity, higher design and construction quality, and meeting the target values of construction projects. Considering the significant advantages of lean, the accelerated dissemination and adoption of lean methods and tools for construction is highly desirable. Currently, the lean design and construction body of knowledge is imparted primarily through publications and conferences. However, one of the most effective ways to impart this soft knowledge is through getting students and trainees involved in hands-on participatory games, which can quickly help them truly understand the concept and apply it to real-world problems. The COVID-19 Pandemic has raised an urgent need of developing virtual games that can be played simultaneously from various locations over the Internet, but these virtual games should be as effective as in-person games. This research develops an online 3D simulation game for Target Value Design that is as effective as in-person games or possibly better in terms of knowledge capture and retention and enjoyable environment and experience. The virtual game is tested on volunteers using feedback from pre-and post- simulation surveys to evaluate its efficacy.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.282-288
• /
• 2015

Purpose : The purpose of this study is to compare the RAM (reliability, availability and maintainability) value in the acquisition phase with operational period for air weapon systems. The objective is to determine if the value of RAM is sufficient in the field, and look for any difference from the target value to some extent. Methods : For a case study, the ${\bigcirc}{\bigcirc}$ training aircraft is selected. Data from the two acquisition sources are utilized. One is the operational data in domestic aircraft through research and development, and the other is the data from imported aircraft. The two different sources were collected independently and distinctly. Results : According to the analysis, the domestic aircraft shows high deviation in RAM value compare to the imported systems. This is due to the effort of continuous reliability improvement. In the aspect of maintainability, the result shows a slight deviation, and the availability meets the requirement. Conclusion : The results of this study can be used in finding a way that can be effectively applied to the sustainability in the weapon system. If the RAM performance is significantly lower than the target value, then it is necessary to improve the design activities so that they can achieve the RAM target value.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.3
• /
• pp.180-186
• /
• 2003

In order to prediction of lethal effects on target microorganisms, this study was developed the program in the basis of Excel that was systemized with Visual Basic. This program was automatically calculated the lethal effects (L and Fo value) by using thermal characteristics (D and z value), kinetic model and mathematic model. For the selection of target microorganisms, we are selected two microorganisms because of spoilage increasing by acid production and decreasing quality of food, and heat resistance microorganisms. The target microorganisms were Bacillus cereus (D$_{121.1}$=0.0065 min, z=7.8$^{\circ}C$) and Bacillus subtilis (D$_{121.1}$=0.5 min, z =12$^{\circ}C$). The program was developed for the target microorganisms, and that was very useful for various microorganisms that direct introducing known D and z value.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.885-894
• /
• 2023

Setting RAM target value for a defense system plays a crucial role in the development and design phases and the production phase as well. It is apparent that the achieved RAM target value can help maximizing the combat capability of a defense system and improving its performance throughout the system's life cycle from acquisition phase to disposal. Usually a defense system operates according to its OMS/MP (Operational Mode Summary / Mission Profile) and it consists of several subsystems which are supposed to be operated at each utilization rate under its operating conditions and the mission profiles assigned. In this study, a method of setting RAM target value is proposed for a defense system that are composed of several independent subsystems considering their utilization rates and the mission profiles assigned. And the case study of applying the proposed method of setting RAM target value to system A is dealt with.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.16-22
• /
• 2015

Korea Aerospace Research Institute(here after KARI) has a plan to launch experimental lunar orbiter in 2018, and lunar orbiter and lander in 2020. There are several ways to go to the moon. Which one is direct transfer trajectory and another one is phasing loop transfer trajectory and the other one is WSB trajectory. Regardless of the transfer trajectories, LOI maneuver is the most important maneuver of all mission sequences because if this burn is failed, it is too difficult to get into the lunar orbit in the future. This paper describes first LOI target value of foreign lunar orbiters and analyzes orbital variations of experimental lunar orbiter according to various target values. By analyzing the variation of orbiter parameter after first LOI, proper orbital period for LOI target value are recommended to meet the inclination, apoapsis and periapsis altitude constraints.

• Journal of Distribution Science
• /
• v.20 no.6
• /
• pp.1-10
• /
• 2022

Purpose: This research proposes a new modified Recency-Frequency-Monetary (RFM) model by extending the model with spatial analysis for supporting decision-makers in discovering the promotional target market. Research design, data and methodology: This quantitative research utilizes data-mining techniques and the RFM model to cluster a university's provider schools. The RFM model was modified by adapting its variables to the university's marketing context and adding a district's potential (D) variable based on heatmap analysis using Geographic Information System (GIS) and K-means clustering. The K-prototype algorithm and the Elbow method were applied to find provider school clusters using the proposed RFM-D model. After profiling the clusters, the target segment was assigned. The model was validated using empirical data from an Indonesian university, and its performance was compared to the Customer Lifetime Value (CLV)-based RFM utilizing accuracy, precision, recall, and F1-score metrics. Results: This research identified five clusters. The target segment was chosen from the highest-value and high-value clusters that comprised 17.80% of provider schools but can contribute 75.77% of students. Conclusions: The proposed model recommended more targeted schools in higher-potential districts and predicted the target segment with 0.99 accuracies, outperforming the CLV-based model. The empirical findings help university management determine the promotion location and allocate resources for promotional information distribution and student recruitment.

• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.66-78
• /
• 2001

This paper deals with problem of determining process target value under automated visual inspection(AVI) system. Three independent error sources - digitizing error, illumination error, and positional error - which have a close relationship with the performance of the AVI system, are considered. Assuming that digitizing error is uniformly or normally distributed and illumination and positional errors are normally distributed, respectively, the distribution function for the error of measured lengths is derived when the length of a product is measured by the AVI system. Then, Optimal target values under two error models of AVI system are obtained by minimizing the total expected cost function which consists of give away, rework and penalty cost. To validate two process setting models, AVI system for drinks filling process is made up and test results are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.596-599
• /
• 2004

The purpose of this study is to investigate properties of porous concrete according to rheological properties of binder and compaction factor. The results of this study, the rheological property of binder is stabilized when a mixing time is over 240 seconds in case of target flow values are $175\%\;and\;200\%$. The void ratio of specimen has a very near value by target void ratio on the whole according as the rheological properties of binder and compaction energy are changed when target flow value is $200\%$, compaction energy is $75kN{\cdot}m/m^2$. The specimen has the excellent compressive strength when compaction energy and target flow value are $100kN{\cdot}m/m^2$ and $200\%$ respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.41-49
• /
• 2017

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These traditional $C_p$ and $C_{pk}$ were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.