• Computers and Concrete
• /
• v.12 no.6
• /
• pp.755-774
• /
• 2013

Considering the well known environmental issues of cement manufacturing (direct and indirect levels of $CO_2$ emissions), clinker replacement by supplementary cementing materials (SCM) can be a very promising first step in reducing considerably the associated emissions. However, such a reduction is possible up to a particular level of SCM utilization, influenced by the rate of its pozzolanic reaction. In this study a (4-step) structured methodology is proposed in order to be able to further adjust the concrete mix design of a particular SCM, in achieving additional reduction of the associated levels of $CO_2$ emissions and being at the same time accepted from a derived concrete strength and service life point of view. On this note, the aim of this study is twofold. To evaluate the environmental contribution of each concrete component and to provide the best possible mix design configuration, balanced between the principles of sustainability (low environmental cost) and durability (accepted concrete strength and service life ). It is shown that such a balance can be achieved, by utilising SCM by-products in the concrete mix, reducing in this way the fixed environmental emissions without compromising the long-term safety and durability of the structure.

• CELLMED
• /
• v.3 no.2
• /
• pp.17.1-17.10
• /
• 2013

Reproductive dysfunction is a major health concern amongst the inhabitants of Tana River County. An ethno botanical study was conducted in Garsen, Itsowe and Ngao sub divisions of Tana River County to document the utilization of medicinal plants for the management of female reproductive ailments. The target population was practicing herbalists from Pokomo, Ormo and Giryama communities in the study area. Structured questionnaires and focussed group discussions were used to collect data. Forty eight plant species distributed in 40 genera and 29 families were documented as being important for the management of pregnancy related complications, menstrual disorders, infertility, fibroids and as contraceptives. The species most frequently cited by the herbalists were fourteen. Fifty two percent of the plant species were probably being mentioned for the first time as being useful in reproductive health management. In conclusion, Tana River has a pool of TMPs with a wealth of indigenous knowledge that needs to be exploited. The plants used to treat dysmenorrhea for example may be important analgesic agents that need further investigation while those with anti-fertility properties may contain steroidal phyto chemical compounds. Such species therefore need further investigation to establish their efficacy and mechanism of action.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.5.1-5.5
• /
• 2015

Objectives To protect public health from risk, the Minister of Environment in Korea legislated an act concerning the registration and evaluation of chemical substances. In this study, we estimated the value of a statistical life (VSL) of carcinogenic chemicals to evaluate the socioeconomic analysis in Korea. Methods The estimation of the health benefit can be calculated through an individual's VSL and willingness to pay (WTP). To estimate the VSL and WTP, we used a contingent valuation method through a web-based survey. Results The survey is conducted with 1434 people living in Seoul and six large cities. An analysis of the survey is essential to review the distribution of the characteristics of the target population. The statistically significant variables affecting the WTP are location, age, household income, quality of life. Through the review of data, we secured statistical validity. The WTP was estimated as 41205 Korean won (KRW)/person, and the estimated VSL appeared as 796 million KRW/person. Conclusions There is a case in which the amount of statistical life value is estimated in connection with domestic environmental policy, fine dust, etc. However, there are no cases of evaluation for chemical. The utilization of this result is possible for conducting other study with chemicals.

• Asian Journal of Business Environment
• /
• v.8 no.4
• /
• pp.5-15
• /
• 2018

Purpose - The research aimed to reveal real decisional behavioral of management institutes in India for social media marketing usage, and analyses of empirical elements of social media consumption pattern. Research design, data, and methodology - The investigation was based around a research methodology using quantitative analysis with appropriate statistical techniques on random surveys of consumers, detailed exploratory and confirmatory factor analyses are applied to assess the empirical validity of the model and multiple regression employed using R studio edition to validate the reliability of the developed models. Results - A new conceptual framework is proposed - the management institutions decision model, providing a tool for effective and more focused decision-making strategies for developing better utilization techniques for social media. Management institutions have different requirements based upon objectives and resources available. The evidence suggests that the administrators need to be more aware of consumer indicators when targeting and designing social media marketing strategy. Conclusions - The research was based on samples and not the entire population of target consumers, providing limitations. As an inferential statistical method was chosen, the results might be susceptible to inaccuracy. The model developed from different age users, thereby providing rich perspectives into social media usage pattern.

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.658-668
• /
• 1997

Path of a small hydrophobic molecule through the aqueous cytoplasma is not linear. Partition may favor membrane binding by several orders of magnitude : thus significant membrane association will markedly decrease the cytosolic transport rate. The presence of high concentration of soluble binding proteins for these hydrophobic molecules would compete with membrane association and thereby increase transport rate. For long chain fatty acid molecules, a family of cytosolic binding proteins collectively known as the fatty acid binding proteins(FABP), are thought to act as intracellular transport proteins. This paper examines the mechanism of transfer of fluorescent antyroyloxy-labeled fatty acids(AOFA) from purified FABPs to phosholipid membranes. With the exception of the liver FABP, AOFA is transferred from FABP by collisional interaction of the protein with a acceptor membrane. The rate of transfer increased markedly when membranes contain anionic phospholipids. This suggests that positively charged residues on the surface of the FABP may interact with the membranes. Neutralization of the surface lysine residues of adipocyte FABP decreased fatty acid transfer rate, and transfer was found to proceed via aqueous diffusion rather than collisional interaction. Site specific mutagenesis has further shown that the helix-turn-helix domain of the FABP is critical for interaction with anionic acceptor membranes. Thus cytosolic FABP may function in intracellular transport of fatty acid to decrease their membranes association as well as to target fatty acid to specific subcellular sites of utilization.

• Korea Journal of Hospital Management
• /
• v.23 no.2
• /
• pp.18-27
• /
• 2018

Purposes: This study aims to investigate the policy effect of mandatory application of DRG for 7 disease groups in general and tertiary hospitals. Methodology: As DRG was fully implemented in July 2013, this study compares two periods before and after the change(from July 2012 to June 2013, and from July 2013 to June 2014). The benefit claim data of the National Health Insurance Service was used for the comparison. Target patients were those who visited general or tertiary hospitals between July 2012 to June 2014. For pharmaceutical consumption, Interrupted Time Series (ITS) analysis was used to see the effect of DRG mandatory application. Findings: The number of drugs prescribed per patient and pharmaceutical expenditure both showed significant reduction compared to before the DRG implementation. Practical Implications: This study used 2 sets of 1 year period data from before and after the full implementation of DRG to analyze pharmaceutical consumption. When the comparison data accumulates further, it would be possible to conduct more diverse analysis to assess policy effect and to provide way forward for the future.

• Fashion & Textile Research Journal
• /
• v.16 no.4
• /
• pp.520-531
• /
• 2014

Jeju, the biggest island in Korea, was registered as a World Natural Heritage in 2007. Recently, it was also voted as one of the New Seven Wonders of Nature. The need for academic awareness and tourist values on Jeju Island are understood. Gal-ot, one of the ten symbols for Jeju, is known for working clothes in general, despite its potential for cultural products because of its regional uniqueness and useful functional advantages. The authors conducted a comprehensive literature review and researched market trends of Gal-ot stores in Jeju to present development directions for cultural goods and to contribute to local economic improvement. Most stores were located in a semi-residential area and Jeju-si in Jeju Special Self-Governing Province. Most products were not available for sale due to difficulties in the production process and online utilization. High prices and similar color, fabric and style hurt competitiveness. Various experiencing programs of Gal-ot and persimmon dyeing were necessary to expand the main target from residents to tourists. Also, marketing strategies using the internet and design plans reflecting current trends were needed. This study would contribute to prepare developmental projects of cultural product and result in economical advantages on Jeju Island.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.2
• /
• pp.26-37
• /
• 2003

An optimal software release, which is related to the development cost, error detection and correction under the various operation systems, is a critical factor for managing project. This paper described optimal software release issues to predict the release time of large switching system with the system stability point of view and evaluated a timely supply of target system, proper utilization of resources under the software reliability valuation basis. Finally, Using initial failure data, based on the exponential reliability growth model methodology, optimal release time, and analysis of failure data during the system testing and managing methodologies were presented.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.393-396
• /
• 2008

Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.47-54
• /
• 1996

It needs more than two images which are obtained in real time to decide 3D positioning of dynamic object. Though we use digital camera which is became wide utilization, but it can't obtain sequential image. So, in this study, we constructed momentary image acquisition system using video camera. Also, we took a photograph of LCD timer and dynamic object together for real time stereo image, and we obtained independent digital image from sequential image using video editor. As a result of the study, we could obtain the independent image as true color digital image of $788{\times}550$pixels with 1/100sec accuracy in the same time. And it was good when we tested object target. For comparing 3D positioning accuracy, we could obtained negative with metric camera using B-shutter.