• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.7
• /
• pp.587-594
• /
• 2005

In this paper, a robust correlation-based video tracking is proposed to track a moving object in correlated image sequences. A correlation-based video tracking algorithm seeks to align the incoming target image with the reference target block image, but has critical problems, so called a false-peak problem and a drift phenomenon (correlator walk-off. The false-peak problem is generally caused by highly correlated background pixels with similar intensity of a moving target and the drift phenomenon occurs when tracking errors accumulate from frame to frame because of the nature of the correlation process. At first, the false-peaks problem for the ordinary correlation-based video tracking is investigated using a simple mathematical analysis. And, we will suggest a robust selective-attention correlation measure with a gradient preprocessor combined by a drift removal compensator to overcome the walk-off problem. The drift compensator adaptively controls the template block size according to the target size of interest. The robustness of the proposed method for practical application is demonstrated by simulating two real-image sequences.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.269-272
• /
• 2006

Surface contacts between mold and target should be in parallel for the imprinting mechanism. However, the size of contacting area makes it difficult for both mating surfaces to be in all contact because of precision level of the imprinting machine and the waviness of mold and target. The gripping force for both mold and target with the vacuum chuck is also major effect to interrupt the full contact, which must be avoided in imprinting mechanism. In this study, the preliminary study for the causes of non-uniformity of contacting surfaces such as mold and target is performed with $470{\times}370mm^2$ LCD panel size.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.40-55
• /
• 2005

This study was carried out to discuss the feasibility of wood and plastic wastes as the raw materials for wood particle-plastic composites. For this purpose, composites were manufactured from coarse and fine wood particles and polypropylene fibers by nonwoven web process. And the effect of wood particle size on the performance of the composites were analyzed according to ASTM D 1037-93. In the physical properties of composites, water absorption decreased with the increase of target density and polypropylene fiber content. And the composites with fine wood particles appeared to have slightly lower water absorption than those with coarse wood particles. Thickness swelling did not vary significantly with the increase of target density but increased with the increase of wood particle content. And the composites with fine wood particles were significantly lower in thickness swelling than those with coarse wood particles. In the mechanical properties of composites, dry and wet MOR showed the increasing tendency with the increase of polypropylene fiber content and target density. Dry and wet MOE showed the increasing tendency with the increase of target density but only wet MOE exhibited the increasing tendency with the increase of polypropylene fiber content. Composites with fine wood particles appeared to be generally higher in wet MOR and MOE than those with coarse wood particles. In conclusion, composites with fine wood particles showed generally higher performance than those with coarse ones. Also, composites were significantly superior to control particleboards in the performance, especially in water absorption and thickness swelling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.373-381
• /
• 2017

DBS(Doppler Beam Sharpening) algorithm is a way to improve azimuth resolution performance in radar. Since DBS image includes the is information about the search area of radar, various clutter components exist besides the target to be detected. To detect and track the desired target in a DBS image, it must be able to identify a target and the clutter components. In this paper, we describe how to use image size and terrain information(DTED) to identify the target in a DBS image. By using morphological filter and chain code, it acquires image size and excludes the clutter components. By matching with DTED, we determine target.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1E
• /
• pp.38-44
• /
• 2010

This paper is based on our comments and proposed amendments to the documents, Annex A, Phantom for determining Maximum Depth of Penetration, and Annex B, Local Dynamic Range Using Acoustical Test Objects 87/400/CDV. IEC 61391-2 Ed. 1.0 200X, prepared by IEC technical Committee 87; Ultrasonics. The documents are concerned with the influence of microstructure of reference target material on the ultrasonic backscattering. Previous works on the attenuation due to backreflection and backscattering of reference target materials are reviewed. The drawback to the use of ungraded stainless steel and metallic materials without microstructural data such as, crystal structure, basic acoustic data of sound velocity and attenuation, grain size, roughness and elastic constants has been discussed. The analysis suggested that the insightful conclusion can be made by differentiating the influence arising from target size and microstructure on the backscattering measurements. The microstructural parameters are associated with physical, geometrical, acoustical and mechanical origins of variation with frequency. Further clarification of such a diverse source mechanisms for ultrasonic backscattering would make the target material and its application for medical diagnosis and therapy simpler and more reliable.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.174-181
• /
• 2004

Various kinds of systems, that can do target recognition and position detection simultaneously by using infrared sensing detectors, have been developed. In this paper, the detection system TRSS (Thermal target Recognition by Spiral Scanning) adopts linear array shaped uncooled IR detector and uses spiral type fast scanning method for relative position detection of target objects, which radiate an IR region wavelength spectrum. It can detect thermal energy radiating from a 9 m-size target object as far as 200 m distance. And the maximum field of a detector is fully filled with the same size of target object at the minimum approaching distance 50 m. We investigate two types of lens systems. One is a singlet lens and the other is a doublet lens system. Every system includes one aspheric surface and free positioned aperture stop. Many designs of F/1.5 system with ${\pm}5.2^{\circ}$ field at the Efl=20, 30 mm conditions for single element and double elements lens system respectively are compared in their resolution performance [MTF] according to the aspheric surface and stop position changing on their optimization process. Optimum design is established including mechanical boundary conditions and manufacturing considerations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.1
• /
• pp.44-50
• /
• 1993

The suspended particulate matters had been collected by a cascade impactor having 9 size fragnated stages for 2 years (Dec. 1989 to Nov. 1991) in Kyung Hee University-Suwon Campus. The particulate matters were then collected on each stage by membrane filters. The weight concentration on each stage was estimated by a microbalance and further chemical element concentrations were determined by an XRF system. The study focused on developing of a receptor model using the TTFA (target transformation factor analysis) to apportion aerosol mass with the 30 ambient data sets. Each data set consists of the 8 size-ranged subdata sets characterized by 13 element variables. Even though a couple of sources could not be identified, three to five sources were extracted from each aerosol size-range, and then 9 statistical source profiles were generated. Finally, source contribution of particulate matters on each size-range could be estimated in Suwon area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1049-1059
• /
• 2011

This study investigates the current state of companies that manufacture and sell outdoor wear. A survey was conducted to identify what problems they had and what aspects they needed to supplement through a comparison and analysis of their block patterns. Companies that manufactured outdoor wear and those that sold them were separately surveyed to understand their current state. The manufactures included 4 companies and 14 sellers. The survey used interviews to cover the areas of target consumers, development patterns, production lines, body size, nominal size, production size, and functional materials for each item, and aspects that need improvement. The survey period was from September $3^{rd}$ to $10^{th}$ 2008. There were three block patterns for jackets, T-shirts, and pants. The investigator collected the patterns used by three outdoor clothing manu-facturers for comparison and assessment. As a result, the mean age of the target consumers set by the outdoor clothing manufacturers and sellers was 25.3-50.7 and 29.2-42.5, respectively, which shows that the outdoor clothing had a wider distribution of target consumers than the sellers. It is imperative for them to segment and differentiate the target consumers and concepts. The basic body measurements the companies used to draw the upper and lower garment patterns were the bust circumference for the upper garment patterns and the waist circumference for the lower garment patterns. The basic nominal size was 95 for the upper garment and 70 for the lower garment. Also analyzed were the block patterns according to the items to understand the pattern characteristics of each of the companies. There were a total of 35, 36, and 30 items for the jackets, T-shirts, and pants, respectively, to measure size. The items were then compared with one another in mean and standard deviation. The analysis indicate that the block patterns were not fit for women in their twenties or thirties to wear and required revisions in the length of the upper garment, the height of sleeve cap, bust circumference, hip length, and pant length.

• The Korean Journal of Applied Statistics
• /
• v.31 no.5
• /
• pp.587-597
• /
• 2018

Procedures, such as sampling technique, survey method, and questionnaire preparation, are required in order to obtain sample data in accordance with the purpose of a survey. An important procedure is the decision of the sample size formula. The sample size formula is determined by setting the target error and total cost according to the sampling method. In this paper, we propose a sample size formula using population changes over time, estimation error of the previous time and response rate of past data when the target error and the expected response rate are given in the simple random sampling. In actual research, we use estimators that apply complex weights in addition to design-based weights. Therefore, we induce a sample size formula for estimators using design-based weights and nonresponse adjustment coefficients, that can be a formula that reflects differences in response rates when survey methods are changed over time. In addition, we use simulations to compare the proposed formula with the existing sample size formula.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.549-561
• /
• 2000

The purpose of this study was to survey and analyze the age classification of women customers as a target market and sizes on a label that were actually produced by each brand in Korean national brands ; they were classified into size for bodice and bottom, and compared with the distribution of national data of women's body measurement. They were analyzed and classified by brand groups of 'miss', 'missy', 'Mrs.'and 'madam', The results were ; 1) It was found that recent products for ready-made for women's clothes tend to be designed with target to the measured ages classified by the range of five or ten years. The main practice was that for 'miss'brand group the age range was of five years, and for 'missy'brand group, ten years. And for 'Mrs'and 'madam'brand groups, it was of 15 or 20 years. So that, it is necessary to design their clothes based on their features of body considering the intervals of age. 2) 'Mrs'and 'madam'groups were most remarkable for their distribution into a vast range of sizes for three control dimensions and waist girth size when compared to 'miss'and 'missy'groups. The distribution of brand size had no relation with that of body measurement, and in particular, none was produced for short height size between 145 and 150 ㎝. For tall height size between 175 and 180 ㎝, many brand sizes were distributed while body measurement was few. It means that distribution of brand size was different from real distribution of body measurement was few. It means that distribution of brand size was different from real distribution of body measurement as a result that the larger the bust girth in such cases over 160 ㎝, the larger the size of hip girth. Even as for the height 155 and 160 ㎝ in which body measurement is concentrated, there were many problems because while sizes of 'large'bust girth and 'small'hip girth had a large distribution, their clothes were not produced.