• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.191-198
• /
• 2022

FIB is introduced as the sole guideline for the design purpose that results in a practical relationship for the torsional capacity of concrete beams strengthened with carbon fiber-reinforced polymer (CFRP). This study applies first-order reliability method to assess the reliability evaluation of the torsional capacity of CFRP-strengthened beams on the basis of FIB guidelines. In terms of steel reinforcement losses, this study applies a corrosion model to investigate the ceaseless deterioration of the existing structure. Hence, the average of reliability indices varies between 2.68 and 2.80, indicating the reliability viewpoint of the design methodologies. The average values are somehow low compared to the target values of reliability (3.0 or 3.5) applied in the calibration stage of the FIB guideline. In this way, the partial safety factors may change in the forthcoming guideline revisions. For this aim, the reliability of strengthening ratio was applied to assess the variation in the average value of the reliability index with different partial safety factors. The performance of parametric study for the factor proved that minimum values of 1.60 and 2.32 are required for target values of reliability (3.0 and 3.5), respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.508-518
• /
• 2008

Reliability and sensitivity analysis of the design parameters for a section of caisson type quaywall which is the most applicable in Korea were performed. It was tried to estimate probabilities of failure for the system of the multiple failure modes and to analyze LCC in the quaywall structure. The reliability analysis was performed by FORM. Also, sensitivity indices were estimated using the reliability indices, which may be used inferring effects of each design parameter on the reliability indices. As a result, the coefficient of friction between caisson and rubble, the moment by self weight and the moment of resistance mostly affected on the reliability indices in the sliding, overturning and foundation failure, respectively. System reliability theorem was applied in order to estimate the probabilities of failure for the system of the multiple failure modes. As the results of estimation of the probabilities of failure for the system, all cases were more conservative than those for the elements, according to both failure mode and load combination applied to series system. It entirely exceeded the target reliability index, but it was consistent with the theorem. According to the optimum LCC with the width of the caisson, the probability of failure exceeded the target probability of failure at then time. Therefore, it was judged to be insufficient to the practical application.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.507-512
• /
• 2011

본 논문에서는 종굽힘 최종강도에 대한 선체 중앙단면 구조의 구조신뢰성 해석과 이에 기초한 설계를 다루었다. 길이 100m이상인 8척의 산적화물운반선과 7척의 탱커를 본 연구의 대상 모델로 선정하였다. 본 대상 선박 모델들에 대한 구조 신뢰성 해석결과를 토대로 목표신뢰성 지수를 도출하였다. 두 선종의 중앙단면 설계시 목표신뢰성 지수를 만족할 수 있는 설계공식을 제안하였고, 이를 본 연구대상 선박 모델들의 재설계에 적용하여 그 타당성을 보였다. 이러한 결과로부터 구조 신뢰성 해석에 기초하여 개발한 설계공식에 의한 설계결과는 보다 균일한 수준의 안전성을 제공할 수 있었다.

• 한국해안해양공학회지
• /
• 제14권2호
• /
• pp.95-107
• /
• 2002

신뢰성설계법의 적용성을 확대하기 위하여 혼성제 직립 케이슨의 활동에 대한 신뢰성 해석이 수행되었다. 충격쇄파 효과를 고려한 결정론적 설계법에 의하여 단면의 안전성이 자세히 해석되었으며, 특히 신뢰성 해석의 결과를 직접 결정론적 설계법의 결과와 연결시키기 위한 연구가 시도되었다. 해석 결과에 의하면 현재의 결정론적 설계 법에서 적용되고 있는 안전율은 약간 안전 측에 속한다. 또한 동일한 입사조건과 안전율에 대하여 수심이 증가함에 따라 신뢰지수는 감소하는 경향을 보이고 있다. 한편 방파제가 그 기능을 수행하는데 지장이 없을 것으로 예상되는 목표 파괴확률을 설정하고 그 목표 범위내에서 가장 최적의 파괴 확률을 산정하였는데, 입사조건에 따라 약간 씩 다른 최적의 안전율이 추정되었다. 마지막으로 혼성제 케이슨의 단면 결정에 영향을 주는 변수들의 변화에 따른 민감도 분석이 수행되었다. 해석 결과에 의하면 입사각, 주기의 영향이 크게 나타났으며 하상의 경사나 마운드의 두께에 대한 영향의 정도는 상대적으로 낮게 평가되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.212-221
• /
• 2022

이 연구에서는 국내 도로교량 평가에서도 설계와 일관성이 있도록 한계상태설계법에 상응하는 평가방법을 마련하고, 선진국과 같이 평가에서 목표신뢰도지수를 감소시키는 경우 신뢰도분석을 통하여 보정하여 평가 활하중계수를 제안한다. 국내 대표 교량형식을 대상으로 수집한 실교량 자료를 활용하여 각 설계기준 별 설계활하중에 대한 하중효과를 산정하여 비교한다. 현행 설계법에 의해 산정된 하중효과를 바탕으로 최소요구강도를 산정하여 이에 대한 신뢰도분석을 통해 활하중계수 보정을 수행한다. 설계수준에 비하여 낮춰진 평가수준의 활하중계수를 교량 안전성평가를 수행하고, 이전 설계법의 안전성평가 결과와 비교하여 평가결과가 증가함을 확인하였다.

• 한국철도학회논문집
• /
• 제9권1호
• /
• pp.29-35
• /
• 2006

Trains in LRT(Light Railway Transit) system usually have shorter car length than metro's because of their smaller passensers demand. Therefore it is very likely that the load condition of LRT system in abnormal operation, in case of which trains are in close proximity by system broke or train rescue works, could be worse rather than in normal operation, in spite of rare probability of abnormal operation. In this study, the target reliability indexes of several abnormal operations are estimated in accordance with the occurrence probabilities of each abnormal operation case and the reliability index of normal operation presented by the specification. From the indexes, load factors for the abnormal operation cases are estimated and the safety evaluation is performed for Yong-in LRT project.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.135-140
• /
• 1993

The optimum weight design of structure is to determine the combination of structural members which minimize the weight of structures and satisfy design conditions as well. Since most of loads and design variables considered in structural design have uncertain natures, the reliability-based optimization techniques need to be developed. The aim of this study is to estabilish the general algorithm for the minimum weight design of transmission tower structure system with reliability constraints. The sequential linear programming method is used to solve non-linear minimization problems, which converts original non-linear programming problems to sequential linear programming problems. The optimal solutions are produced for various reliability levels such as reliability levels inherent in current standard transmission tower cross-section and optimal transmission tower cross-section obtained with constraints of current design criteria as well as selected target reliability index. The optimal transmission towers satisfying reliability constraints sustain consistent reliability levels on all members. Consequently, more balanced optimum designs are accomplished with less structural weight than traditional designs dealing with deterministic design criteria.

• 한국해안·해양공학회논문집
• /
• 제31권6호
• /
• pp.351-355
• /
• 2019

무공케이슨 방파제의 한계상태설계를 위한 하중저항계수를 제시하였다. 전국 항만의 16개 방파제에 대한 신뢰성해석을 수행하여 부분안전계수를 산출하였으며 이를 하중과 저항계수로 전환하였다. 개별적으로 구한 하중저항계수에 최적화기법을 적용하여 최종 하중저항계수를 보정하였다. 최종적으로 얻은 하중저항계수를 이용하여 방파제를 재설계한 후 목표수준을 만족하는지 검증하였다. 목표신뢰도수준의 변화에 따른 하중저항계수를 제시하여 한계상태설계가 용이하도록 하였다.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.412-418
• /
• 2011

Reliability-based Topology optimization(RBTO) is to get an optimal design satisfying uncertainties of design variables. Although RBTO based on homogenization and density distribution method has been done, RBTO based on BESO has not been reported yet. This study presents a reliability-based topology optimization(RBTO) using bi-directional evolutionary structural optimization(BESO). Topology optimization is formulated as volume minimization problem with probabilistic displacement constraint. Young's modulus, external load and thickness are considered as uncertain variables. In order to compute reliability index, four methods, i.e., RIA, PMA, SLSV and ADL(adaptive-loop), are used. Reliability-based topology optimization design process is conducted to obtain optimal topology satisfying allowable displacement and target reliability index with the above four methods, and then each result is compared with respect to numerical stability and computing time. The results of this study show that the RBTO based on BESO using the four methods can effectively be applied for topology optimization. And it was confirmed that DLSV and ADL had better numerical efficiency than SLSV. ADL and SLSV had better time cost than DLSV. Consequently, ADL method showed the best time efficiency and good numerical stability.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.311-319
• /
• 2001

All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. Therefore, $C_{s}$ is proposed which extends the most useful index to date, the Pearn-Kotz-Johnson $C_{pmk}$, by not only taking into account that the process mean may not lie midway between the specification limits and incorporating a penalty when the mean deviates from its target, but also incorporating a penalty for skewness. Therefore we propose, a new process capability index $C_{psk}$( WV) applying the weighted variance control charting method for non-normally distributed. The main idea of the weighted variance method(WVM) is to divide a skewed or asymmetric distribution into two normal distribution from its mean to create two new distributions which have the same mean but different standard distributions. In this paper we propose an example, a distribution generated from the Johnson family of distributions, to demonstrate how the weighted variance-based process capability indices perform in comparison with another two non-normal methods, namely the Clements and the Wright methods. This example shows that the weighted valiance-based indices are more consistent than the other two methods In terms of sensitivity to departure to the process mean/median from the target value for non-normal process.s.s.s.