• Journal of Korean Society on Water Environment
• /
• 제22권6호
• /
• pp.977-981
• /
• 2006

In order to improve water quality in drinking water sources, Ministry of Environment (MOE) was implemented total water pollution load management (TWPLM) in all the major river basins. From the experience of the application of TWPLM, we could find some problems relating the target watershed, standard operating procedure (SOP) of establishment and implementation plan, water quality and flow rate, design flow, water quality model, margin of safety (MOS), and estimation of wasteload were found. The authors were reviewed ongoing TWPLM and presented the improvement schemes for a successful TWPLM. For the application of these suggestions, further detailed studies should be done to implement TWPLM in the future.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.475-488
• /
• 1997

This study investigated the management environment of medium and small business by examining the role of medium and small business in national economics, the change in management condition, and the problems in quality and technique. Also we analyzed problems in the past quality control activity of our medium and small business, and examined the driving direction and intorduction method of QM. And to understand the effect of manager's concern in quality management to observe the quality system before and after introduction of QM. A target for this investigation is the medium and small business which has introduced QM through ISO 9000. Also analyzed how 05 observance effects to the sale price, process effect customer complaint and on-time delibery by an oral test.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제55권4호
• /
• pp.167-175
• /
• 2006

This paper presents a method to segment semiconductor wafer ID on poor quality images. The method is based on multiple templates and normalized gray-level correlation (NGC) method. If the lighting condition is not so good and hence, we can not control the image quality, target image to be inspected presents poor quality ID and it is not easy to identify and then recognize the ID characters. Conventional several method to segment the interesting ID regions fails on the bad quality images. In this paper, we propose a multiple template method, which uses combinational relation of multiple templates from model templates to match several characters of the inspection images. To find out the optimal solution of multiple template model in ID regions, we introduce newly-developed snake algorithm. Experimental results using images from real FA environment are presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.143-146
• /
• 2006

There has been growing concern regarding IAQ(Indoor Air Quality) recently, and IAQ problems from the air-tightness and use of chemical materials addition to the building materials have become increasingly important factors in the built environment. Ventilation is supposed as the solution of healthy indoor quality, and Korea government requests that all new apartment buildings must have a ventilation system as a matter of duty since January, 2006. The purpose of this study is to investigate the indoor concentration change of VOCs include the Formaldehyde according to many different ventilation supply types. Results showed that the reduction effect of target pollutants by the ventilation system was very slight. The cause of these results was attribute to increase the emission rate of building materials by increasing the ventilation rate.

• Journal of Institute of Control, Robotics and Systems
• /
• 제10권8호
• /
• pp.726-733
• /
• 2004

This paper presents a method to segment object ID(identification) marks on poor quality images under uncontrolled lighting conditions of automated inspection process. The method is based on dynamic programming using multiple templates and normalized gray-level correlation (NGC) method. If the lighting condition is not good and hence, we can not control the image quality, target image to be inspected presents poor quality ID marks and it is not easy to identify and recognize the ID characters. Conventional several methods to segment the interesting ID mark regions fail on the bad quality images. In this paper, we propose a multiple template method, which uses combinational relation of multiple templates from model templates to match several characters of the inspection images. To increase the computation speed to segment the ID mark regions, we introduce the dynamic programming based algorithm. Experimental results using images from real factory automation(FA) environment are presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제14권24호
• /
• pp.133-139
• /
• 1991

If the specifications of product. in general. art determined too wide. the precision of product becomes diminished. Otherwise it costs dearly to keep the precision. Therefore, It is realistic to consider various factors in determining specification of qualify characteristics TAGUCH Idefines quality of an object as "Quality is the loss that a product causes to society after being shipped. other than any losses caused by its intrinsic function". Particularly, to improve the performances of product TAGUCHI focuses his attention on the product design and process design which enable the functional characteristics of product to he robust to noises. In this paper, by the TAGUCHI's loss function, the characteristics which affect the variation of a product performance are classified into the scrappable characteristics and the reworkable characteristics when the target values of functional characteristics have been determined. And we will determine the tolerance of each characteristic which minimize the quality cost by the cost function which considers the economic factors and probability features of each characteristic.cteristic.

• Journal of radiological science and technology
• /
• 제32권3호
• /
• pp.277-283
• /
• 2009

It is important to get clinical ultrasonic images of good quality for accurate diagnosis. In this study, it observed the change of ultrasonic images against setting frequency, dynamic range(DR) and type of probes on ultrasonic scanner. In the experiment it evaluated image of LCS (Low Contrast Sensitivity) targets(-15, -6, -3, +3, +6, +15 dB) of a standard ultrasonic test phantoms(539,551, ATS, USA) similar to solid and cystic lesions. Its imaged from convex (C3-7IM) and linear probe (L5-12IM) on SA-9900 (Medison Ltd, Korea) scanner. The images obtained altering the setting parameters which are frequency(gen, pen, res, harmonic) mode and DR($40{\sim}100\;dB$). The quality of images evaluated compare with the nominal LCS value of target and measured LCS value. The results show that there was no significant changing of quality images altering DR 40, 60, 80, 100 dB against frequency in Convex probe but the image being the highest in LCS target at DR 60 dB, harmonic of frequency mode in the -15 dB target close to cystic lesion. In Linear probe, DR 40 dB, harmonic mode at -15 dB LCS target close to nominal value. It discussed necessity of evaluation about ROC(Receiver Operating Characteristic) from the psychological viewpoint and limit of evaluation from quantified images.

• Journal of Korean Society on Water Environment
• /
• 제29권3호
• /
• pp.400-408
• /
• 2013

Total phosphorus was set as a target indicator to prevent eutrophication and algae growth, etc., in three major rivers (Nakdong River, Geum River and Yeongsang/Seomjin River) for the second phase (2011 ~ 2015) in total maximum daily loads (TMDLs) system. However, total phosphorus management was restrictively introduced, i.e., upstream of the Lake Daechung, in the Geum River watershed. Total phosphorus concentration and trophic levels in downstream of the Lake Daechung (include Mangyeong and Dongjin rivers) were increased more than upstream. Therefore, it is necessary to expand total phosphorus management in all watersheds of the Geum River. If total phosphorus was managed in all area of the Geum River watershed, it is possible to decrease total phosphorus concentration and trophic levels, and solve the unbalanced water quality between up and downstream of the Lake Daechung.

• New & Renewable Energy
• /
• 제6권2호
• /
• pp.27-32
• /
• 2010

Low Calorific Gas Turbine (LCGT) has been developed as a next generation power system using landfill gas (LFG) and biogas made from various organic wastes, food Waste, waste water and Livestock biogas. Low calorific fuel purification by pretreatment system and carbon dioxide fixation by green house system are very important design target for the optimum applications of LCGT. Main troubles of Low Calorific Gas Turbine system was derived from the impurities such as hydro sulfide, siloxane, water contained in biogas. Even if the quality of the bio fuel is not better than natural gas, LCGT may take low quality gas fuel and environmental friendly power system. The mechanical characterisitics of LCGT system is a high energy efficiency (>70%), wide range of output power (30 kW - 30 MW class) and very clean emission from power system (low NOx). A green house has been designed for four different carbon dioxide concentration from ambient air to 2000 ppm by utilizing the exhaust gas and hot water from LCGT system. LCGT is expected to contribute achieving the target of Renewable Portfolio Standards (RPS).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제24권6호
• /
• pp.470-475
• /
• 2014

In the past, transmission error(T.E.) has been identified as one of the main sources of gear whine noise, which cause serious passengers irritation at high frequency. In this study, to identify the correlation of the T.E. and gear whine noise, a T.E. measuring system was developed. By comparing the T.E. and gear whine noise level, T.E. target value which can represent the gear noise was proposed. The conclusions are followed: (I) It is possible to measure T.E. of the gear pairs (II) Similar trends are observed between T.E. and gear whine noise. (III) By observing the T.E. pattern, presence of sideband noise can be predicted. (IV) Proposed T.E. target value can be adopted to the gear manufacturing for gear noise quality management.