• 한국진공학회지
• /
• 제14권4호
• /
• pp.245-251
• /
• 2005

A high performance dual rocking magnet sputtering gun has been developed. The rocking magnet sputtering gun introduces full-face erosion by rapidly rocking the magnet in the region where the high plasma density is maintained. The newly developed dual rocking magnet sputtering gun whose target utilization was 77 percent achieved high performance in quality in the view of target utilization and target life-time comparing to the existing magnetron sputtering gun. The PIC-MCC target erosion simulation has been performed simultaneously. Comparing experimental target erosion profiles with simulated target erosion profiles, the simulation could estimate the tendency of the target erosion profiles but could not estimate an exact target erosion profile. If the simulation were improved more precisely, the cost reduction for the development of the multiple rocking magnet sputtering gun would be expected.

• 한국환경성돌연변이발암원학회지
• /
• 제22권4호
• /
• pp.236-242
• /
• 2002

Using agarose-coupled methotrexate, we have successfully isolated two proteins, which have strong interactions with methotrexate. The two proteins were analyzed by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry and identified as carbamoyl-phosphate synthetase 2 and phosphoribosylglycinamide formyltransferase, respectively. Interestingly, both of these two proteins are essential key enzymes in nucleotide biosynthetic pathways, like dihydrofolate reductase, a well-known methotrexate target. We confirmed the specificity of their interactions between methotrexate and two target proteins by the methods of competition binding assay, which were followed by western blotting using antibody against carbamoyl-phosphate synthetase 2 and phosphoribosylglycinamide formyltransferase, respectively. Moreover, we could observe that carbamoyl-phosphate synthetase 2 is overexpressed in methotrexate-resistant MOLT-3 cells comparing with control MOLT-3 cells. This result indicates that carbamoyl-phosphate synthetase 2 may be a novel target of methotrexate in cancer therapy. We propose that chemical proteomics can be a powerful technique to identify target proteins of a chemical.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.365-366
• /
• 2007

High quality cathode with high deposition rate of thin films and long target life time is required for manufacturing TFT-LCD and semiconductor. We developed WV(wide view) sputtering cathode with wide erosion area and high deposition rate. Ti thin film thickness variation in WV cathode is below 5% for 380 kWh target life time. Al thin film thickness using normal cathode is decreased about 20%. By using WV cathode, target using efficiency was improved 40%. in comparison with normal cathode.

• Journal of the Korean Wood Science and Technology
• /
• 제51권6호
• /
• pp.493-508
• /
• 2023

Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.794-797
• /
• 2009

We manufactured a novel gas permeation thin film passivation by using inorganic Mg-Zn-F target which has better optical characteristics and high electronegativity. We fabricated targets in various composition ratio and formed about 200nm which is limited thickness of the flexible display. Applied to PLED device, the target which composed of $MgF_2$ and Zn at the ratio of 4:6, WVTR was reached the measurement limit of the equipment, $10^{-3}g/m^2{\cdot}day$ and the life time was increased 25 times better than PLED device which is non-passivation.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.978-983
• /
• 2010

무선 센서 네트워크에서 음향 표적의 식별은 환경 감시, 침입 감시, 다중 표적 분리 등에서 많이 연구된다. 무선 센서 네트워크의 센서 노드에서 사용하는 기존의 신호 처리기법은 표적으로부터 수신된 신호의 에너지를 계산하여 표적의 존재 유무만을 기지국으로 전송하는 방법과 수신 신호를 압축하여 전송하는 방법이 많이 사용되었다. 전자의 경우 표적의 감시를 위한 무선 센서 네트워크에서는 표적의 정보가 한정적이므로 적합하지 않고 후자의 경우는 센서 노드에서의 신호처리 및 전송에 소모되는 에너지가 높아 센서의 생존시간이 줄어들게 된다. 따라서 본 논문에서는 표적의 감시를 위한 무선 센서 네트워크에서 필요한 시간정보와 표적의 주파수 정보를 포함하는 센서 노드에서의 특징 추출 기법을 제안한다. 본 논문에서는 웨이블릿 변환을 이용하여 추출된 웨이블릿 상수에서 표적의 시간 정보와 잡음이 제거된 표적의 식별 정보를 추출함으로서 센서 노드에서 에너지 효율적인 신호처리를 구현하고 추출된 특징을 전송하여 통신에 소모되는 에너지를 원신호 대비 28%로 줄이는 알고리듬을 제안한다.

• 한국주거학회논문집
• /
• 제16권5호
• /
• pp.67-74
• /
• 2005

The performance of building should be deteriorated with time while the building would maintain and manage the function and performance to get a living condition. For the efficient maintenance of the building, the repair cycle would be provided and applied during the service-life time. The service-life time of the building components would be needed to determine the repair time and the repair scope. The service-life time of the building components would be calculated with the 1st repair time and the recovery rate of the performance, considering the recovery rate after repaired. In this paper, the 1st repair time would be estimated with the normal probability distribution, choice probability and 3rd quadratic function. The recovery rate of the building components assumes various level according to the research target and utility area. The results of this study are as follows ; first, most of the components of the building work would range about 30 years in the service-life time and the components of the mechanical works range from 28 years to 37 years, those of the electrical works would be about 31 years.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권11호
• /
• pp.1646-1652
• /
• 2016

Mammalian target of rapamycin complex 1 (mTORC1) is a central regulator of cell growth and metabolism and is sufficient to induce specific metabolic processes, including de novo lipid biosynthesis. Elongation of very-long-chain fatty acids 1 (ELOVL1) is a ubiquitously expressed gene and the product of which was thought to be associated with elongation of carbon (C) chain in fatty acids. In the present study, we examined the effects of rapamycin, a specific inhibitor of mTORC1, on ELOVL1 expression and docosahexaenoic acid (DHA, C22:6 n-3) synthesis in bovine mammary epithelial cells (BMECs). We found that rapamycin decreased the relative abundance of ELOVL1 mRNA, ELOVL1 expression and the level of DHA in a time-dependent manner. These data indicate that ELOVL1 expression and DHA synthesis are regulated by mTORC1 in BMECs.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.35-44
• /
• 2003

A system reliability method is proposed to decide reliable serviceability of agricultural irrigation system. Even though reliability method is applied to real engineering situations involving actual life environments and maintaining costs, a number of Issues arise as a modeling and analysis level. This article use concepts that can be described the probability of failure with time variant and series-parallel system reliability analysis model. A proposed method use survivor function that can simulate a time-variant performance function for a lifetime before it is required essential maintenance or replacement to define a target probability of failure in agricultural irrigation canal. In the further study, it is required a relationship between a state of probability of failure and current serviceability to make the optimum repair strategy to maintain appropriate serviceability of an irrigation system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.