• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.183-196
• /
• 1998

The Synthetic Aperture Radar(SAR) image and the Digital Elevation Model(DEM) of an target area are put into use to generate three dimensional image map. An method of image map generation is explained. The orbit and attitude determination of satellite makes it possible to model signal acquisition configuration precisely, which is a key to mapping image coordinates to geographic coordinates of concerned area. An application is made to RADARSAT in the purpose of testing its validity. To determine the orbit, zero Doppler range is used. And to determine the attitude, Doppler centroid frequency, which is the frequency observed when target is put in the center of antenna's view, is used. Conventional geocoding has been performed on the basis of direct method(mapping image coordinates to geographic coordinates), but in this reserch the inverse method(mapping from geographic coordinates to image coordinates) is taken. This paper shows that precise signal acquisition modeling based on the orbit and attitude determination of satellite as a platform leads to a satellite-centered accurate geocoding process. It also shows how to model relative motion between space-borne radar and target. And the relative motion is described in ECIC(earth-centered-initial coordinates) using Doppler equation and signal acquisition geometry.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.63-72
• /
• 2010

In the future warfare, the importance of the counter-fire operation is increasing. The counter-fire operation is divided into offensive counter-fire operation and defensive counter-fire operation. Reviewing the researches done so far, the detection asset of offensive counter-fire operation called UAV(Unmanned Aerial Vehicle) and its operational effectiveness analysis is continually progressing. However, the analysis of the detection asset of defensive counterfire called Target Acquisition Radar(TAR) and its quantitative operational effectiveness are not studied yet. Therefore, in this paper, we studied operational effectiveness of TAR using C2 Theory & MANA Simulation model, and showed clear quantitative analysis results by comparing both cases of using TAR and not using TAR.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.138-145
• /
• 2011

This study analyzed the time to understand the space and the contents of information to be memorized in the indoor space. Understanding the space and examining the memory will not only provide the basic data on which visual activities occur in user's perceiving the designed space but also expand the activity range of interior designer. The summary of the study results is as follows: First, with respect to gender difference, the results showed that males grasped the space in a relatively shorter time. Females showed more concentrated distribution range than males. Second, as for the proper time by accumulative sum across time, the results showed that it increased continuously until V time zone(120~150 seconds), it decreased rapidly after the V zone, which indicated that the proper gazing time for the indoor space as the target of this study is less than 150 seconds(effective gazing time). Third, in terms of efficiency of information acquisition, the results suggested that "60~90 seconds" are the effective time for acquiring the greatest amount of information. Fourth, regarding the information acquisition method, males were approximately 4.1%~0.1% lower in the evaluation through phrase and image. The evaluation of subjects through phrase than image was connected to more accurate information acquisition.

• Proceedings of the Technology Innovation Conference
• /
• 1999.06a
• /
• pp.98-118
• /
• 1999

This study deals with the knowledge acquisition activities along the growth stages of Korean ventures. This issue is very important in the three reasons. First, the target of the study-new ventures- is a pending issue and can be regarded as the engine of innovation in the Korean economy. Second, venture activities is so dynamic compared to those of the established companies and the study reflects its dynamic features. Third, the knowledge is becoming more important one among various resources, and knowledge management can be a timely issue. The main research questions are as follows : - How does the degree of knowledge domain, vary along the growth stages\ulcorner - Which knowledge domains are more influential on the performance along growth stages\ulcorner Major findings of the study are as follow: First, technological knowledge acquisition effort are most intensive at the start-up stage, while the management knowledge efforts are active at the growth stage. The degree of market knowledge acquisition efforts is almost the same along the stages. Second, the important knowledge domain, which influences on the performance, varies along the stages. The acquisition effort for product technology knowledge is more influential on the sales growth rate and has a negative effect on the return on assets at the start-up stage, while the management knowledge about administration is more influential on the return on assets at the growth stage. Finally the academic contributions and managerial implications of the study are presented and the future research directions are also suggested.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.3-12
• /
• 2020

Nowadays, as-is BIM generation has been popularly adopted in the architecture, engineering, construction and facility management (AEC/FM) industries. In order to generate a 3D as-is BIM of a structural component, current methods require a registration process that merges different sets of point cloud data obtained from multiple locations, which is time-consuming and registration error-prone. To tackle this limitation, this study proposes a registration-free 3D point cloud data acquisition technique for as-is BIM generation. In this study, small-size mirrors that rotate in both horizontal and vertical direction are used to enable the registration-free data acquisition technique. First, a geometric model that defines the relationship among the mirrors, the laser scanner and the target component is developed. Second, determinations of optimal laser scanner location and mirror location are performed based on the developed geometrical model. To validate the proposed registration-free as-is BIM generation technique, simulation tests are conducted on key construction components including a PC slab and a structural wall. The result demonstrates that the registration-free point cloud data acquisition technique can be applicable in various construction elements including PC elements and structural components for as-is BIM generation.

• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.43-48
• /
• 1999

Purpose : For practical application of the MR image for stereotactic radiosurgery, the target point achieved by acquisition of MR image in a relatively homogeneous phantom has to agree with the actual isocenter of irradiation in real radiosurgery and the amount of distortion of the MR image should be known. Materials and Methods : A dosimetric film with a random target point was inserted into a radish vertically and horizontally on axis Z and they were fixed with a headring. After image acquisition by stereotactic radiosurgery planning system, we achieved stereotactic coordinate of the target point and examined irradiation using the coordinate acquired as isocenter. After the irradiation, the film in the radish was developed and processed and the degree of coincidence between the target point marked on the film and the center of the radiation distribution. In order to measure the degree of distortion of the MR image in a different way, an acryl phantom was made and punctures were made at intervals of 1 cm and a drop of oil was dropped into it. Then, it was inserted into the radish vertically and horizontally on axis Z to acquire the MR image. Each coordinate was achieved and the estimation of distortion of MR image was made both in vertical and horizontal directions Results : The film from the radio was developed and for the one inserted vertically on axis Z, there was a good coincidence in the discrepancy between the target point marked on the film and the center of the radiation distribution. For the one inserted horizontally, the discrepancy between them was under 0.5 mm. As a result of estimating distortion of MR image using acryl, the discrepancy was under 0.45 mm in the case of the phantom inserted vertically on axis Z, and that of the one inserted horizontally was 1.4 mm. Conclusion : We were able to confirm good coincidence in homogeneous phantom in actual treatment position of radiosurgery using the MR image and the discrepancy measured in the analysis of distortion of the MR image did not exceed the permissible level. Therefore, it was evident the system of the hospital is suitable for radiosurgery using MR image.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.89-94
• /
• 1998

To make practical application of the MR image for stereotactic radiosurgery, the target point-achieved by acquisition of MR image in stereotactic radiosurgery planning system must agree with the actual isocenter of irradiation in real treatment. And the amount of distortion of the MR image must be known to make a correction for the agreement. A radish containing abundant water content was chosen as a homogeneous phantom for the purpose of verification of the agreement in this experiment. A dosimetric film was firmly attached to the small specially fabricated acryl plate and needle puncture was made through the film just into the acryl plate and a drop of oil was dropped into the hole of the film. The acryl plate with film was inserted into the radish and the dorp of oil represented the target point in MR image. After the image acquisition by stereotatic radiosurgery planning system, we achieved stereotactic coordinate of the target point represented by the oil drop. And we proceeded to actual irradiation to the target point according to the procedure of stereotactic radiosurgery. After the irradiation, the film in the radish was developed and processed and the degree of coincidence between the center of the radiation distribution and the target point represented by the hole in the film was measured. The discrepancy between two points was under 0.5 mm. so we could confirm good coincidence in homogeneous phantom such as radish. On the other hand, authors tried to use our home-made device for estimation of distortion of MR image.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.15-21
• /
• 2007

In this paper, we propose a technique of a practical symbol acquisition and tracking using a low complex ADC and simple digital circuits for noncoherent asynchronous impulse-radio-based Ultra Wideband (IR-UWB) receiver based on energy detection. Compared to previous approaches of detecting an exact acquisition time that require much hardware resource, the proposed technique is to detect the target symbol by finding the symbol acquisition interval per symbol with a target symbo, thus the complexity of the complete signal processing and power consumption by ADC are reduced. To do this, we define the bit decision window (BDW) and analyze the relation between SNR, hardware resource, size of BDW and BER(Bit Error Rate). Using the results, the optimum BDW size for the minimum BER with limited hardware resource is selected. The proposed synchronization technique is verified with an aid of a simulator programmed by considering practical impulse channels.

• Clinical Endoscopy
• /
• v.55 no.4
• /
• pp.549-557
• /
• 2022

Background/Aims: Digital single-operator cholangioscopy (DSOC)-guided mapping biopsy (DMB) and tube-assisted mapping biopsy (TMB) are two techniques used for preoperative evaluation of biliary tract cancer (BTC). However, data regarding the diagnostic performance of these techniques are limited. Methods: We retrospectively examined consecutive patients with BTC who underwent either technique at our institution between 2018 and 2020. We evaluated the technical success rate, adequate tissue acquisition rate, and diagnostic performance of these techniques for the evaluation of lateral spread of BTC. Results: A total of 54 patients were included in the study. The technical success rate of reaching the target sites was 95% for DMB and 100% for TMB. The adequate tissue acquisition rate was 61% for DMB and 69% for TMB. The adequate tissue acquisition rate was low, especially for target sites beyond the secondary biliary radicles. The sensitivity of DMB alone was 39%, which improved to 65% when combined with visual impression. Experts demonstrated a higher negative predictive value and diagnostic accuracy with respect to both DSOC visual impression and DMB for the evaluation of lateral spread of BTC compared to trainees. Conclusions: Adequate tissue acquisition rates were similar between the two techniques. Since DMB requires expertise, TMB may be an acceptable option when DSOC is unavailable or when DSOC expertise is limited.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.466-470
• /
• 1993

A HILS(Hardware-In-the-Loop Simulation) technique for an IR guided weapon is proposed. The IR HILS facility functions as a testing unit for a missile guidance and control system to evaluate target acquisition, tracking, and countermeasure performance. The configuration of IR HILS facility, modeling technique of an IR environment including target, background and countermeasure, and test and evaluation procedure are included.