• Wind and Structures
• /
• 제20권4호
• /
• pp.527-548
• /
• 2015

Aeroelastic wind tunnel experiments were conducted for conventional and tapered super-tall building models to investigate the effect of taper on fundamental aeroelastic behaviors in various incident flows. Three incident flows were simulated: a turbulent boundary-layer flow representing urban area; a low-turbulent flow; and a grid-generated flow. Results were summarized focusing on the effect of taper and the effect of incident flows. The suppression of responses by introducing taper was profound in the low-turbulence flow and boundary-layer flow, but in the grid-generated flow, the response becomes larger than that of the square model when the wind is applied normal to the surface. The effects of taper and incident flows were clearly shown on the normalized responses, power spectra, stability diagrams and probability functions.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.206-214
• /
• 2001

This paper describes the wire EDM (Electric Discharge Machining) CAM system considering a variable taper wire-cut and an unmanned wire EDM during the night. Wire EDM is applicable to all materials that are fairly good electrical conductors, including metals, alloys and most carbide. Thus it provides a relatively simple method for making holes of any desired cross section in materials that are too hard or brittle to be machined by most other methods. In this paper we classify variable taper wire-cut machining patterns and variable taper wire-cut geometries. Also we determine unmanned wire EDM patterns fur the productivity of wire EDM industry. Developed system consists of two modules: 1) Variable taper wire EDM module guarantees the length ratio machining function, the parametric ratio machining function and the marking function. 2) Unmanned wire EDM module guarantees the automatic wire EDM during the night. The proposed system has been tested in the fields and found to be a useful system.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.185-189
• /
• 2003

The purpose of this study is to obtain the optimal operating condition of conduction cooled taper shape high-temperature superconductor (HTS) current lead operated in current sharing mode. In our previous study, we discovered that the optimal operating condition of constant cross-section area HTS current lead is in the current sharing state, and in optimal condition, the temperature gradient at warm end is not zero. The analysis result of taper HTS current lead is quiet similar to the constant area HTS current lead. The minimum dissipation of taper HTS current lead is not influenced by taper angle, however the optimal operation condition is varied with taper angle.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1638-1645
• /
• 2006

This paper proposes a modeling technique which is able to not only reliably and easily represent the hysteretic characteristics but also analyze the dynamic stress of a taper leaf spring. The flexible multi-body dynamic model of the taper leaf spring is developed by interfacing the finite element model and computation model of the taper leaf spring. Rigid dummy parts are attached at the places where a finite element leaf model is in contact with an adjacent one in order to apply contact model. Friction is defined in the contact model to represent the hysteretic phenomenon of the taper leaf spring. The test of the taper leaf spring is conducted for the validation of the reliability of the flexible multi-body dynamic model of the taper leaf spring developed in this paper. The test is started at an unloaded state with the excitation amplitude of $1{\sim}2mm/sec$ and frequency of 132 mm. First, the simulation is conducted with the same condition as the test. Then, the simulations are conducted with various amplitudes in a loaded state. The hysteretic diagram from the test is compared with the ones from the simulation for the validation of the reliability of the model. The dynamic stress analysis of the taper leaf spring is also conducted with the developed flexible multi-body dynamic model under a dynamic loading condition.

• 한국정밀공학회지
• /
• 제32권12호
• /
• pp.1011-1016
• /
• 2015

In a roll-to-roll continuous system, winding is one of the most important processes since it determines the quality of the final manufactured products such as flexible film and printed electronic devices. Since an adequate winding tension can reduce the incidence of the defects that are derived from the inner stress of the wound roll such as starring and telescoping, it is necessary to determine the optimal taper-tension profile. In this study, an algorithm for the setting of an optimal taper-tension profile in consideration of the residual stress in the wound roll is suggested; furthermore, the algorithm was adjusted for the determination of an optimal taper-tension profile regarding the winding process of $10{\mu}m$ polypropylene (PP) film. As a result of the algorithm-generated, optimal taper-tension profile, the residual stress and radial stress in a PP wound roll were decreased to 27.37 % and 40.05 % (mean value), respectively.

• 구강회복응용과학지
• /
• 제28권1호
• /
• pp.57-66
• /
• 2012

본 연구는 ProTaper Universal에 의도적으로 부여한 내부 응력이 피로 파절에 미치는 영향을 평가하였다. 25 mm 길이의 S1, S2, F1, F2, F3, F4 그리고 F5 파일을 내부 응력을 부여하기 위해서 Endo-Training-Bloc (Dentsply Maillefer)에 auto-stop 될 때까지 속도 300 rpm, 토크 1.0 Ncm의 값으로 밀어 넣었다. 부여한 내부 응력의 횟수에 따라 각각 Stress 0 군(대조군), Stress 1 군, Stress 2 군 그리고 Stress 3 군으로 분류하였다. 경사진 유리판을 사용하였고 파일 파절 시간을 측정하였다. 모든 파일에서는 Stress 3 군은 대조군에 비해 Ni-Ti 파일의 파절 시간이 감소하였고 F2와 F3에서 모든 실험군은 대조군에 비해 파절 시간이 감소하였다. F4와 F5에서 Stress 2 군과 Stress 3 군이 대조군에 비해 파절 시간이 감소하였다. ProTaper Universal의 피로 파절은 파일에 축적된 내부 응력에 의해 영향을 받는다.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.323-331
• /
• 2008

이 연구의 목적은 세가지 니켈-티타늄 파일의 휨과 회전 조건 하에서의 응력 분포를 유한요소 모형을 이용하여 비교하는 것이다. ProFile .06/#30, ProTaper와 ProTaper Universal의 F3파일을 마이크로컴퓨터 단층촬영을 하고 reverse engineering을 통하여 세 니켈 티타늄 파일의 구조를 얻고 삼차원 유한요소모형을 제작하였다. 니켈 티타늄 합금의 비선형적인 물리적 성질을 반영하고 ABAQUS 프로그램을 이용하여 휨과 회전 조건 하에서의 기계적인 움직임을 수학적으로 예측 분석하였다. U-형태의 단면 구조를 가진 ProFile이 모형 가운데 가장 좋은 휨 성질을 나타냈다. 동일한 휨량 조건에서는 볼록한 삼각형 단면의 ProTaper가 다른 모형보다 많은 힘을 필요로 하였으며, 반면에 가장 높은 von Mises 응력은 ProTaper Universal의 단면에서 움푹 파인 부위에 집중되었다. ProFile 모형은 동일한 크기의 회전력 에 대해 가장 큰 응력 집중을 U-형 구 부위에 나타냈다. ProTaper 모형은 다른 모형에 비해 동일량을 비틀기 위해 더 많은 힘을 필요로 하였으며, 반면에, 동량의 비틀림에서는 가장 높은 von Mises 응력이 ProTaper Universal의 단면에서 움푹 파인 부위에 집중되었다.

• 오토저널
• /
• 제3권1호
• /
• pp.38-45
• /
• 1981

In this paper, the natural frequencies of curved taper leaf springs using on vehicle suspension systems are studied. By applying the Castigliano's definition, Rayleigh's principle and Dunkerley's equation, new formulas defining the natural frequency of such shaped spring are derived. Numerical calculations are in very good agreement with experimental results on actual models. We found that the natural frequencies of curved taper spring are increased by 21-28% compared with the spring having same weight, span and curve but uniform section.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.113-119
• /
• 1998

Air spring has the advantages to be nearly constant in natural frequency inspite of load change, and to be able to control height level. Half-long taper spring has the advantages to function as well link as spring. Thus to utilize two type spring's advantages, half-long taper spring and air spring are combined and used. In this study, the theory to calculate the characteristics in combination is developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1618-1620
• /
• 1997

A GaAs schottky diode with taper field plate is proposed to increase breakdown voltage. Breakdown voltage is calculated by device simulator MEDICI. The GaAs schottky diode with taper gate which has $5.7^{\circ}$ taper angle have shown 45% increase in the breakdown voltage compared with conventional field plate GaAs schottky diode.