• Journal of Korea Water Resources Association
• /
• v.56 no.7
• /
• pp.451-460
• /
• 2023

In this study, the risk of red water and turbid water occurrence was analyzed by classifying it into detachment risk and deposition risk. First, risk factors for red water and turbid water were determined, and hydraulic analysis was conducted considering seasonal water consumption. The applied area was Cheongju City, and the risk analysis was conducted across 13 areas, and the areas with high deposition risk and high detachment risk were selected. The high risk of both detachment and deposition can be judged as an area with a very high probability of causing water quality problems. The areas with the highest deposition risk and detachment risk are the old towns of Nae deok1-dong and Yul1yang-dong, which are the oldest areas in Cheongju City with an age of more than 30 service years of pipe installation. By analyzing the risk of deposition and detachment, it will be possible to strengthen the maintenance function of the water supply network to provide the safe water to citizens and increase their confidence for tap water.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.947-958
• /
• 2008

To study the effect of a washing machine with silver nano technology on its detergency, the discoloring of the dyed clothes and the staining of standards adjacent fabrics were examined. As the laundry specimen, cotton fabric dyed with reactive dyes and Polyester fabric dyed with disperse dyes were chosen; and as the adjacent fabrics, undyed cotton. polyester and nylon fabrics were chosen. The colorfastness was evaluated after washing under conditions that those washing temperature, liquor ratio, detergency concentration and the type of water were varied. When the clothes were washed with the tap water contains silver ion, the deposition of silver compounds into the washed clothes was measured. As a results, after the washing in the various conditions, discoloring of the dyed clothes was not intense. The higher the washing temperature and the lower the liquor ratio, the larger the staining appeared on the white fabrics; especially for the white nylon fabrics. The concentration of detergent and the type of water affected hardly the colorfastness. After the repeated washing with the water contains silver, whiteness of the cotton and the nylon fabrics were lower than the result after the washing with the tap water, and a quantity of silver ions was found on the washed clothes.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.2 s.42
• /
• pp.202-209
• /
• 1993

A accidental spills of phenol(100%) to the river Nakdong with subsequent contamination of the tap water fer about two million consumers in Taegu city of Korea were occurred in March 1991. A historical cohort study of 6,913 individuals was undertaken to determine the associated with illness. Population subjects were divided into two groups of exposed and unexposed. Exposed subjects were reported to be phenol associated symptoms significantly higher than those in a nearby unexposed area(39.6% vs 9.4%, p<0.01). Especially, in the related symptoms, highly significant differences were noted in the number of subjects reporting gastrointestinal illness such as nausea, vomiting, diarrhea, or abdominal pain. During the accident, study subjects who experienced peculiar taste or odor in the tap water were significantly higher in the exposed areas(92% vs 34.3%). Chlorophenols formed from chlorination of water may have aggravated the problem.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.4
• /
• pp.316-324
• /
• 2005

The objectives of this study were to examine effect of ion chip and yellow soil on the growth and physicochemical characteristics of soybean sprouts. The weight and length increased rapidly in soybean sprouts cultivated for 4 days and then the increases slowed. Ascorbic acid increased rapidly after day 6 in soybean sprouts cultivated with ionized water (I.W), $1.0\%$ yellow soil in tap water (T.W+l.0) and $1.0\%$ yellow soil in ionized water (I.W+l.0). The detected content of minerals such as Mg, Ca, K and Fe in soybean sprouts was higher than other minerals. Iron content was the highest in soybean sprouts cultivated by I.W+1.0. The detected levels of glutamic acid in soybean sprouts cultivated for 4 days with ionized water was higher than in those grown with tap water. In all soybean sprouts, nucleotides such as UMP, CMP, AMP, Hx and soluble free sugars like sucrose, raffinose, stachylose were detected, and the levels of UMP were found to be the highest among nucleotides and sucrose among free sugars.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.1-8
• /
• 2019

The demand and importance of adhesives and paint coatings applied to solid surfaces such as metals, ceramics, and plastics are increasing. In this study, the influencing factors on the adhesive strength between the polymer coating and the metal adherend were investigated by Dolly test when the adhesive or the paint coating was applied on the metal adherend. Two-component epoxy adhesive was used as the adhesive, and EH2350, a two-component epoxy paint for anti-corrosion, was used as the paint. Especially, the effect of adherend metals(Al, Fe, STS, Cu, Zn), surface roughness and surface contamination(tap water, salt water) on adhesive strength was studied as influencing factors. The adhesive strength between adhesive and adherend was different when the type of metal adherend was different even when the same adhesive was used. It was found that spray water cleaning was necessary before the paint coating process on the surface of the oxide contaminated adherend with tap water or salt water. As a result of this study, it was confirmed that Dolly test can be widely used in the future to measure adhesive strength between paint coating and adherend.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.1-8
• /
• 2022

The corrosion of reinforcement is the main reason for the performance degradation of concrete structures. The pre-rusted parts of rebar in concrete structures are vulnerable to the corrosion, especially if the structure is exposed to wet or chlorinated environments. In this study, effects of different curing solution on corrosion behavior of the pre-rusted rebars in the cement composites were investigated. HCl(3%) and CaCl₂(10%) solution were utilized to accelerate the pre-rust of the rebar, and each pre-rust condition rebar including reference (RE) were placed in mortar cylinder. Three kinds of samples then were cured in CaCl₂ (3%) solution and tap water respectively for 120 days. Electrochemical polarization and half-cell potential measurement were used to monitor the influence of curing water on the corrosion behavior of pre-rusted steel bar in cement composite. The surface morphology and composition of corroded steel bar were analyzed by scanning electron microscope and energy dispersive X-ray diffraction. The results show that the corrosion rates of pre-rusted samples in both curing water are higher than that of non-pre-rusted samples. The corrosion rates of RE, CaCl₂ and HCl pre-rusted samples in salt water were 8.14, 4.48, 13.81 times higher than those in tap water respectively, on the 120th day.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1037-1047
• /
• 2014

A highly sensitive analytical method based on stir bar sorptive extraction (SBSE) technique and gas chromatography/tandem mass spectrometry (GC/MS-MS) has been developed, allowing the simultaneous multi-analyte determination of seven UV filters in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 40 mL of water sample at pH 3 and stirred at 1,100 rpm for 120 min. Other SBSE parameters (salt effect and presence of organic solvent) were optimised. The method shows good linearity (coefficients > 0.990) and reproducibility (RSD < 12.9%). The extraction efficiencies were above 84% for all the compounds. The limits of detections (LOD) and limits of quantification (LOQ) were 2.1~8.6 ng/L and 6.8~27.5 ng/L, respectively. The developed method offers the ability to detect 8 UV filters at ultra-low concentration levels with only 40 mL of sample volume. Matrix effects in tap water, river water, wastewater treatment plant (WWTP) final effluent water and seawater were investigated and it was shown that the method is suitable for the analysis of trace level of 7 UV filters except of benzophenone (BP). The method developed in the present study has the advantage of being rapid, simple, high-sensitive and both user and environmentally friendly.

• Korea Journal of Cosmetic Science
• /
• v.2 no.1
• /
• pp.21-31
• /
• 2020

The aim of this study is to develop a sunscreen stick formulation technology with excellent water resistance and washability. Consumers' needs for sunscreen products are diversifying. Water resistance and ease of washing are both important factors in sunscreen products. However, it is difficult to develop a sunscreen formulation that satisfies these two factors at the same time, because these two elements are in conflict. Fatty acid has a hydrophobic property against the water with low or neutral pH, but when it contacts with soapy water which has high pH, saponification occurs and the fatty acids become surfactants and can be dispersed in the water. Using the reaction characteristics of fatty acids, we can make sunscreen that is highly resistant to water or sweat, but is only selectively removed from soapy water. We found that the sunscreen stick containing fatty acids had better water resistance and washability than the sunscreen sticks without fatty acid. The sunscreen stick containing fatty acids showed a tendency to improve water resistance by scattering ultraviolet rays of long wavelength area by forming insoluble precipitation with divalent ions in tap water after immersion. In addition, an increase in the fatty acid content tended to also increase the ease of cleaning the sunscreen stick. Solid fatty acid was advantageous in improving water resistance than liquid fatty acid, but there was no difference between solid fatty acids and liquid fatty acid in washability. When it comes to stability, the sunscreen stick using liquid fatty acids maintained a high hardness and melting point, and showed no sweating. Based on this study, it is possible to develop an easy washable sunscreen stick formulation technology that has excellent water resistance but is selectively removed only in soapy water.

• Journal of Environmental Policy
• /
• v.2 no.1
• /
• pp.1-29
• /
• 2003

This paper examines the dynamics of environmental policy development in Korea by reviewing some of the ways on how the policy windows have been opened. There are a lot of theoretical arguments about the major factors influencing policy development or changes. Many scholars have believed that severe pollution accidents or salient environmental episodes might have been the main motivation of environmental policy development. This line of argument seems valid, especially with the water pollution control policy in Korea. Water pollution control programs had rapidly expanded along with the series of water pollution accidents in the tap water sources from the late 1980s to mid-1990s. However, regarding other major env. issues, various other factors have played more important roles in the development of the relevant policies. In case of air pollution control policy international sport events such as, 1986 Asian Games, 1988 Summer Olympics, and 2002 World Cup Competition, have contributed for the development. The municipal solid waste management policy partly owed its development to the introduction of local autonomy system in the mid-1990s. Even the foreign currency crisis occurring in December 1997 helped the policy paradigm shift from rigid supply-oriented to soft demand-oriented approaches. After closely looking at the dynamics of environmental policy development in Korea, this paper tries to identify the logical background of the observed outcomes.

• Toxicological Research
• /
• v.29 no.3
• /
• pp.211-215
• /
• 2013

The trace toxic metal copper was assayed using mercury immobilized on a carbon nanotube electrode (MCW), with a graphite counter and a reference electrode. In this study, a macro-scale convection motor was interfaced with a MCW three-electrode system, in which a handmade MCW was optimized using cyclic- and square-wave stripping voltammetry. An analytical electrolyte for tap water was used instead of an expensive acid or base ionic solution. Under these conditions, optimum parameters were 0.09 V amplitude, 40 Hz frequency, 0.01 V incremental potential, and a 60-s accumulation time. A diagnostic working curve was obtained from 50.0 to 350 ${\mu}g/L$. At a constant Cu(II) concentration of 10.0 ${\mu}g/L$, the statistical relative standard deviation was 1.78% (RSD, n = 15), the analytical accumulation time was only 60 s, and the analytical detection limit approached 4.6 ${\mu}g/L$ (signal/noise = 3). The results were applied to non-treated drinking water. The content of the analyzed copper using 9.0 and 4.0 ${\mu}g/L$ standards were 8.68 ${\mu}g/L$ and 3.96 ${\mu}g/L$; statistical values $R^2$ = 0.9987 and $R^2$ = 0.9534, respectively. This method is applicable to biological diagnostics or food surveys.