• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.137-142
• /
• 2018

본 연구는 송 수신 초음파 센서를 이용하여 CNG 탱크에서의 정밀한 연료량을 측정하기 위한 기초 연구로써 탱크내부 압력 및 초음파 센서의 접촉면 변경에 따른 수신감도를 분석하였다. 실험은 탱크와 센서의 접촉면을 점, 선, 면의 3가지 타입으로 변경하고 탱크 내부의 압력을 0 bar 부터 5 bar까지 1 bar 간격으로 충전하면서 측정을 진행하였다. 실험결과 탱크내부의 압력이 증가함에 따라 초음파 센서의 수신신호 값이 감소하는 경향을 확인할 수 있었다. 또한 탱크와 센서의 접촉면적이 증가할수록 수신 신호 값은 증가하지만, 노이즈 또한 증가하는 것을 확인 할 수 있었다. 이와 같은 실험 결과 초음파의 투과 특성을 이용하여 탱크내부의 기체 연료량을 측정할 수 있을 것으로 판단되며, 센서의 접촉면 변경을 통해 정밀성을 향상시킬 수 있을 것으로 판단된다.

• 수산해양기술연구
• /
• 제18권1호
• /
• pp.11-15
• /
• 1982

색망지에 대한 어류의 반응을 조사하기 위하여 7가지 색망지를 2가지씩 조합하여, 이에 대한 말쥐치 Navodon modestus의 반응을 조사한 결과는 다음과 같다. 1. 말쥐치의 개체분포는 대체로 중간구간에 많이 모였으며, 적색과 청색의 조합인 경우에만 양쪽 구간에 많이 모였다. 2. 두 망지쪽 구간에서의 평균 개체 분포차는 5.77%(0.27~12.13%)였다. 3. 말쥐치가 싫어하는 망지의 색채는 백색, 적색, 녹색, 흑색, 청색, 황색, 회색의 순으로 나타났다. 4. 시간의 경과에 따른 두 망지쪽 구간에서의 분포율의 변화는 불안정하게 변동하였으며, 대체로 감소하는 추세를 보였다. 5. 한 색망지 쪽의 분포율이 계속 크거나 적은 상태를 유지하는 경우는 대체로 일어나지 않았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.70-75
• /
• 2001

There is a problem to be solved for improvement of durability and safety for concrete When the waterproofing and anticorrosive work of main concrete are design, the material a of construction need to be correctly applied to appropriate circumstance conditions. Epoxy mostly been used for concrete water tank structure. Lately, lots of subjects on adaption res in mortar for waterproofing and anticorrosive are under discussion. Then, we attempt to approach by evaluating and comparing every capabilities with waterproofing materials in this experiment. Capability evaluation items include the bond age and curing conditions, the bond strength after accelerated weathering test and fret impact resistance, a mount of water, seepage quan Through the experiment analysis, we found that waterproofingtity, drinking water chemicals resistance. and anticorrosive resin mortar used with glass fiber cloth, inorgar material is dominantly superior to other waterproofing materials. According to this paper, we suggest the resin mortar as a new surface treatment material water tank structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.280-282
• /
• 2003

In this paper we tried to analyze through the water tank model to solve these kinds of problems about the square plate earth electrode using general facilities with being compared with the theory formula announced before. The square plate earth electrode that haven't investigated so far is analyzed by being based on laid rod electrode. And the each kind of calculation model was investigated with the experiment of water tank. An experiment of the vertical square Plate electrode about laying depth in the center of the surface of the water has already done with the practical models that have different forms of electrodes.

• 설비공학논문집
• /
• 제17권4호
• /
• pp.341-346
• /
• 2005

The simplification of solar thermal systems reduces the possibility of operating trouble and lowers the cost of the initial investment and maintenance. This also leads to increased competitiveness in the energy market. We proposed a spiral-jacketed storage tank that functions both as a heat exchanger and expansion tank, which removes the secondary piping and markedly simplifies the entire system. The new storage tank was designed and manufactured to maintain the same performance as the conventional system and the exiting system was remodelled by adopting the newly proposed storage tank. This experiment was conducted under real conditions over a period of several months. The retrofitted system with the spiral-jacketed storage tank showed good performance that is on a similar level as the previous system having a typical storage tank and heat exchanger.

• 한국토양비료학회지
• /
• 제39권3호
• /
• pp.136-143
• /
• 2006

철원군의 모범적 사례로 평가받고 있는 돈분 액비화 사업이 전국으로 확산되고 있으나 최근 액비의 악취문제로 민원이 발생함에 따라 일부 돈본뇨 액비저장조가 가동되지 못하는 사례가 생기고 있다. 따라서 본 시험연구는 대표적 액비저장조의 유형에 따라 악취발생 정도와 액비의 품질을 비교 검토하고 각 저장형태에 따른 장단점을 분석하여 돈분저장조의 발전적 개선을 통하여 돈분 액비화사업의 활성화에 도움이 되고자 수행하였다. 액비 표면상으로 배출되는 악취가스농도는 무처리 저장조가 분사교반식/폭기식 저장조보다 높았으나 밖으로 풍겨 나오는 악취 감지정도는 분사교반식/폭기식 저장조가 무처리 저장조보다 높았다. 분사교반 또는 폭기처리한 액비는 액비품질의 균질도가 높은 반연 무처리 저장조의 액비는 상층, 중층, 및 저층 간의 성분함량 차이가 많아 무처리 액비는 시용시 작물의 균일한 생육이 어려울 것으로 생각되었다. 무처리 저장조는 배출액비의 악취발생 잠재능이 분사교반식 또는 폭기식 저장조의 액비보다 높아 실제 시용시 악취발생이 더 많을 것으로 추정되었다. 분사교반식 저장조는 액비에 이물질 혼입시 액비순환장치에 이상을 가져와 고장이 잦은 것으로 나타났고, 폭기식 저장조는 공기주입배관이 하나밖에 없어 전체액비에 폭기효과가 나타나지 못하는 것으로 추정되었다. 액비의 저장기간에 따른 유기물 및 건물중의 감소경향은 무처리 저장조에서는 뚜렷하였으나 분사교반/폭기처리 저장조의 감소경향은 일관성이 없었다. 무처리 저장조는 액비의 악취저감을 위하여 폭기 또는 교반시설을 추가하여야 할 것으로 생각되었다.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.56-60
• /
• 1986

The purpose of this study is to find the light intensity which induced maximum gathering rate and to observe the variation of the gathering rate both in daytime and at night by using rock trout, He.'~agrammos otakii (Jordan et starks). An experimental tank (360L x SOW x 55H cm) was set up in a dark room. An illumination system was attached to the end of one side of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5 W, 150 W) and seven filters. During the experiment water depth was maintained 50 em level in the tank. The tank was marked into six longitudinal sections each being 60 em long to observe the distribution of fish. The fish were acclimatized in dark condition for 50 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds. and the gathering rate was obtained from the average number of fish in each section. The light intensity inducing maximum gathering rate was O. 7 lux (0. 5~1. 1 lux) in the daytime and 5. 2/ux (3.2-7.7 lux) at night. The variation of the gathering rate of fish in illumination time was sma II and showed the decreasing trend.

• 수산해양기술연구
• /
• 제44권2호
• /
• pp.148-156
• /
• 2008

In this study it will be discussed how to solve the problem of discomfort from rolling motion on the fishing boats. Most discomfort is caused by the short cycle of rolling due to the light weight of the boats. The light weight is due to the FRP material which dries a boat. A way to improve the feeling of boarding by using fish hold was researched. The experiment was done on experimental fishing boat made by FRP in Jeju. An existing fish hold was designed and manufactured through the rolling test and that was used for a marine experiment. The rolling condition of the U-tank boat ideally designed was compared to that of an existing fishing boat using the same conditions. The experiments were carried out two times on the stop engine in the outward Sehwa fishing port, which the experimental data had analysed for effects of rolling reduction to compare the U - tank with the of exiting fish hold. The results were confirmed that the U-boat tank in the roll period and GoM were more safe than the existing fish hold and the average amplitude and significant of rolling angles were decreased relatively.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.11-17
• /
• 2002

This paper is concerned with the development of a new method for making, separating ice and storage floated ice by installing an evaporation plate at under-water within a storage tank. In a conventional harvest-type ice storage system, a tank saves ice by separating an ice from an installed evaporation plate, which is located above an ice storage tank as an ice storage system. Developed new harvest-type method shows good heat transfer efficiency than a convectional method. It is because the evaporation panel is directly contacted with water in a storage tank. Also, at a conventional system a circulating pump, a circulating water distributor and a piping are installed, however these components are not necessary in a new method. In this study ice storage systems are experimentally investigated to study the charge and discharge of thermal energy. The results show the applicable possibility and performance enhancement of a new type.