• Current Photovoltaic Research
• /
• v.8 no.1
• /
• pp.6-11
• /
• 2020

The power conversion efficiency (PCE) of a two-terminal tandem solar cell depends upon the tunnel-recombination junction (TRJ) between the top and bottom sub-cells. An optimized TRJ in a tandem cell helps improve its open-circuit voltage (V_oc), short-circuit current density (J_sc), fill factor (FF), and efficiency (PCE). One of the parameters that affect the TRJ is the buffer layer thickness. Therefore, we investigated various TRJs by varying the thickness of the buffer or intermediate layer (TRJ-buffer) in between the highly doped p-type and n-type layers of the TRJ. The TRJ-buffer layer was p-type nc-Si:H, with a doping of 0.06%, an activation energy (E_a) of 43 meV, an optical gap (E_g) of 2.04 eV, and its thickness was varied from 0 nm to 125 nm. The tandem solar cells we investigated were a combination of a heterojunction with intrinsic thin layer (HIT) bottom sub-cell and an a-Si:H (amorphous silicon) top sub-cell. The initial cell efficiency without the TRJ buffer was 7.65% while with an optimized buffer layer, its efficiency improved to 11.74%, i.e., an improvement in efficiency by a factor of 1.53.

• Physical Therapy Rehabilitation Science
• /
• v.4 no.2
• /
• pp.87-93
• /
• 2015

Objective: Balance is a preceding task for functional activities in daily activities as well as community-dwelling activities. To learn skilled and functional activities, it is also necessary to imagine an appropriate and effective movement representation used to plan and execute the functional activities. The purpose of this study was to evaluate the effects of balance imagery of semi-tandem stance on a flat floor and balance beam on balance abilities for elderly and young adults. Design: Cross-sectional study. Methods: Fifteen elderly and thirty-four young adults were enrolled in this study. In order to determine whether there is a change in postural control ability according to the different imagery training methods used, standing static balance measurements were performed. According to the therapist's instructions, participants were to stand in a semi-tandem position on the Good Balance System for 1 minute while imagining that they were standing on a balance beam, and while the postural control abilities was assessed. Results: Postural control was significantly different in balance ability of semi-tandem stance on a flat floor compared to on a balance beam in both geriatrics and young adults. Postural sway was more significantly decreased in young adults than older adults during balance imagery of semi-tandem stance on a flat floor as well as on balance beam (p<0.05). Conclusions: The results of this study suggest that the ability to mentally represent their actions was similar in older adults compared to young adults, although older adults showed a drop in efficiency of postural control more than young adults.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.368-371
• /
• 2006

A coastline is the boundary between land and ocean masses. Knowledge of coastline is essential for autonomous navigation, geographical exploration, coastal erosion monitoring and modelling, water line change, etc. Many methods have been researched to extract coastlines from the synthetic aperture radar (SAR) and optic images. Most methods were based on the intensity contrast between land and sea regions. However, in these methods, a coastline detection task was very difficult because of insufficient intensity contrast and the ambiguity in distinguishing coastline from other object line. In this paper, we propose an efficient method for the delineation of coastline using interferometric coherence values estimated from ERS tandem pair. The proposed method uses the facts that a tandem pair of ERS is acquired from a time interval of an accurate day and that the coherent and incoherent values in coherence map are land and water, respectively. The coherence map was generated from ERS tandem pair, filtered by MAP filter, and divided into land and water by the determination of threshold value that is based on the bimodality of the histogram. Finally, a coastline was detected by delineating the boundary pixels. There was a good visual match between the detected coastline and the manually contoured line. The interferometric coherence map will be helpful to identify land and water regions easily, and can be used to many applications that are related with a coastline.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.821-830
• /
• 2010

Deck plates and hatch coming of large container carrier and offshore structures are joined by ultra-thick plates whose thickness is more than 60mm. Traditionally FCAW has been used to join the thick plates in butt joint. However, FCAW has been replaced with EGW since the welding efficiency of EGW is higher than that of FCAW. Tandem EGW using two electrodes has been applied to vertical position welding by several shipyards. EGW requires one or two layers of bead whereas FCAW requires more than 20 layers of weld bead in thick welding. However, high welding residual stresses are generated by EGW since it uses higher heat input than FCAW. In the present study, a finite element model is suggested to predict the residual stresses induced by the tandem EGW. Butt specimen of EH40 TMCP shipbuilding steel plates vertical welding was modeled by a three-dimensional model. Residual stresses were measured by X-ray diffraction method and to verify the numerical result. The results show a good agreement with experimental result.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.5 s.66
• /
• pp.1-15
• /
• 2005

The motion behaviors including hydrodynamic interaction and mechanical coupling effects on multiple-body floating platforms are simulated by using a time domain hull/mooring/riser coupled dynamics analysis program. The objective of this study is to evaluate off-diagonal hydrodynamic interaction effects and mechanical coupling effects on tandem moored FPSO and shuttle taker motions. In the multiple-body floating platforms interaction, hydrodynamic coupling effects with waves and mechanical coupling effects through the connectors should be considered. Thus, in this study, the multiple-body platform motions are calculated by Combined Matrix Method (CMM) as well as Separated Matrix Method (SMM). The advantage of the combined matrix method is that it can include all the 6Nx6N full hydrodynamic and mechanical interaction effects among N bodies. Whereas, due to the larger matrix size, the calculation time of Combined Matrix Method (CMM) is longer than the Separated Matrix Method (SMM). On the other hand, Separated Matrix Method (SMM) cannot include the off-diagonal 6x6 hydrodynamic interaction coefficients although it can fully include mechanical interactions among N bodies. To evaluate hydrodynamic interaction and mechanical coupling effects, tandem moored FPSO and shuttle tanker is simulated by Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The calculation results give a good agreement between Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The results show that the Separated Matrix Method (SMM) is more efficient for tandem moored FPSO and shuttle tanker. In the numerical calculation, the hydrodynamic coefficients are calculated from a 3D diffraction/radiation panel program WAMIT, and wind and current forces are generated by using the respective coefficients given in the OCIMF data sheet.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2537-2543
• /
• 2014

Between tandem source-channel coding systems and joint source-channel coding systems, it has been known that there is a complexity threshold in complexity versus performance. In this paper, by expanding the previous analysis for equal error protection systems, we analyze and compare the performance under complexity constrains for tandem source-channel coding systems which employ unequal error protection. Under a given complexity constraint, the optimization is performed to minimize the end-to-end distortion of each representative tandem and joint source-channel coding system. The results show that the complexity threshold for unequal error protection systems becomes smaller and the performance enhancement of unequal error protection systems over equal error protection systems gets smaller as the system complexity gets larger.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.883-891
• /
• 2018

In this paper, aerodynamic noise simulation was conducted using DES (Detached Eddy Simulation) and FW-H (Ffowcs Williams and Hawkings) acoustic analogy for the tandem cylinders which have configuration similar to a landing gear of airplanes. Numerical simulation for the tandem cylinders whose centers are 3.7D apart was carried out and results were compared with the measured data such as flow characteristics, pressure coefficients on the cylinder surfaces and far-field noise characteristics. It was confirmed that periodically shedded vortices released at the upstream cylinder and impinged on the downstream cylinder surface are major sources of aerodynamic noise. After verifying the computational method of using DES and FW-H acoustic analogy for predicting aerodynamic noise of tandem cylinders, additional simulation was conducted to examine the effect of attaching a splitter plate at the rear of the upstream cylinder. It was confirmed that the noise level in specific frequency band decreased significantly because the splitter plate changed the vortex shedding features and reduced dipole noise source.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.417-422
• /
• 2023

This paper presents various methods for implementing 3-dB coupler using a broadside slot coupled lines and analyze its characteristics. The ideal coupler of the tandem structure is analyzed on the premise that both the reflection coefficient and the isolation coefficient of the first and second coupler connections are zero. However, since the reflection and isolation coefficients of most couplers are not zero, the S-parameter cascade calculation method was used to check how to the characteristics of the coupler change due to this. In order to confirm that these characteristics appear, a 3-dB coupler was fabricated with one stage and two and three stages of a tandem structure using a broadside slot coupled lines at a center frequency of 2 GHz, and it was confirm that the characteristics of tandem coupler change due to the non-zero reflection coefficient and isolation coefficient of the connection part of the coupler.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.29-37
• /
• 2004

Purpose : A rectum and a bladder should be carefully considered in order to decrease side effects when HDR patient of uterine cervix cancer. Generally speaking, the value of dosimeter at a rectum and a bladder only depends on the value of a planning equipment, while some analyses of the value of dosimetry at rectum with TLD has been reported Or the contrary, it is hardly to find a report with in vivo dosimetry(diode detector). On this thesis, we would like to suggest the following. When a patient of uterine cervix cancer is in therapy, it is helpful to put a diode detector inside of a rectum in order to measure the rectal dose Based upon the result of the dosimetry, the result can be used as basic data at decreasing side effects. Materials and Methods : Six patients of uterine cervix cancer(four with tandem and ovoid, one with cylinder, and the other one with tandem and cylinder) who had been irradiated with HDR. Ir-192 totally 28 times from February 2003 to June 2003. We irradiated twice in the same distant spots with anterior film and lateral film whenever we measured with a diode detector. Then we did planning and compared each film. Results : The result of the measurement 4 patients with a diode detector is the following. The average and deviation from 3 patients with tandem and ovoid were $274.1{\pm}13.4cGy$, from 1 patient with tandem and ovoid were $126.1{\pm}7.2cGy$, from 1 patient with cylinder were $99.7{\pm}7.1cGy$, and from 1 patient with tandem and cylinder were $77.7{\pm}11.5cGy$. Conclusion : It is difficult to predict how the side effect of a rectum since the result of measurement with a diode detector depends on the state of a rectum. According to the result of the study, it is effective to use a TLD or an in vivo dosimetry and measure a rectum in order to consider the side effect. It is very necessary to decrease the amount of irradiation by controlling properly the duration of the irradiation and gauze packing, and by using shield equipments especially when side effects can be expected.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.670-677
• /
• 2010

A comparative study on the Au(I)-catalyzed and IBr-promoted tandem cyclization of 1,5-enyne was reported. This study provides a meaningful mechanistic insight to the concerted nature of this tandem reaction and also provides interesting applications in the synthesis of 7/5- or 8/5-fused bicycles and biaryls.