• International Journal of High-Rise Buildings
• /
• v.2 no.4
• /
• pp.323-330
• /
• 2013

The ASHRAE Technical Committee for Tall Buildings, TC 9.12, has defined a tall building as one whose height is greater than 300 feet (91m). Since the publication of the HVAC Design Guide for Tall Commercial Buildings in 2004, there were only about 300 buildings taller than 200 meters; this number has risen to 600 in 2010 and the prediction 765 buildings taller than 200 meters in 2012. There has also been an introduction of two new classes of tall buildings: ${\bullet}$ Mega tall, which are buildings taller than 300 m, and ${\bullet}$ Super tall, which are buildings taller than 600 m. The effect of ambient air temperature over the height of buildings, especially Mega tall and Super tall buildings. The ambient climatic conditions vary with altitude and these changes in ambient conditions can seriously affect load calculations and performance of super and mega tall buildings. This paper presents revised calculations for stack effect for Tall, Mega Tall and Super tall Buildings.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.155-160
• /
• 2019

Applying the criteria regularly used in sustainability assessment of "ordinary" buildings leads to the observation that tall buildings are "not sustainable." But nothing is ordinary about tall buildings and such an evaluation is not appropriate. While tall buildings may not measure up to the same sustainability standards applied to not-tall buildings, they do indeed have a significant sustainability impact if assessed within their appropriate context. This paper promotes the idea that in evaluating "sustainability" of tall buildings, we must look at their sustainability impact beyond their physical boundaries and within the urban context.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.9-16
• /
• 1996

'This experiment was canied out to investigate the effects of endophyte status(end0phyte-free and -infect) and cutting frequency(3, 4, 5 and 6 timeslyear) on the agronomic characteristics, DM yield and weed development of tall fescue(Festuca arundinacea Schreb.) at the Experimental Field of Grassland and Forage Crops Division, National Livestock Research Institute, Suweon, from 1993 to 1994. 'Ihe results obtained are summarized as follows: DM yield of endophyte-infected tall fescue was slightly higher than that of endophyte-free tall fescue. DM yield of two tall fescue varieties was significantly decreased with frequent culting(p<0.05). Weed development of pasture tended to be decreased with endophyte-infected tall fescue and infrequent cutting, and endophyte-infected tall fescue had a good adaptation to the poor environment. Based on the results of this experiment, it is suggested that a slight increase in forage yield could be obtained from endophyte-infected tall fescue and endophyte-infected tall fescue was more persistant than endophyte-free tall fescue under poor conditions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.17-26
• /
• 1996

This experiment was carried out to investigate the effects of endophyte staWendophyte-free and -infect) and cutting frequency(3, 4, 5 and 6 timeslyear) on the forage quality of tall fescue(Festuca crnrtzdit~crcerr Schreb.) at the Experimental Field of Grassland and Forage Crops Division. National Livestock Research Institute, Suweon, from 1993 to 1994. 'Ihe results obtained are summarized as follows: CP content of tall fexue was increased with endophyte-free and cutting frequency for two varieties. Crude protein yield(CPY) of tall fescue in 1993 was increased with endophyte-free and cutting frequency for two varieties(P<0.05). In 1994, however. CPY of endophyte-free tall fescue was slightly lower than that of endophyte-infected tall fescue and the higher CPY was observed when tall fescue was harvested 6 times per year. NDF content of tall fescue was not different between endophyte-infected and -free. NDF was decreased with cutting frequency for two varieties in 1993, however. it was not influenced by the endophyte and cutting frequency in 1994. ADF content of tall fescue was not different between endophyte-infected and -free. and it was decreased with cutting frequency for two varieties. IVDMD was not influenced by endophyte, however, it was increased with cutting frequency for two varieties. Based on the results of this experiment, it is suggested that a slight increase in forage quality could be obtained from endophyte-free tall fescue and the quality was increased with frequent cutting.

• International Journal of High-Rise Buildings
• /
• v.5 no.4
• /
• pp.243-250
• /
• 2016

Today's architectural design trend based on the recognition of pluralism has led to multiple design directions for all building types including tall buildings. This contemporary design trend has produced many complex-shaped tall buildings, such as twisted, tilted, tapered and freeform towers. Among many different structural systems developed for tall buildings, the diagrid system, with its powerful structural rationale and distinguished aesthetic potential, is one of the most widely used systems for today's tall buildings. This paper studies structural performance of diagrid systems employed for complex-shaped tall buildings. Twisted, tilted, tapered and freeform tall buildings are designed with diagrid structures, and their structural performances are investigated. For the twisted diagrid study, the buildings are twisted up to 3 degrees per floor. In the tilted diagrid study, the angles of tilting range from 0 to 13 degrees. The impact of eccentricity is investigated for gravity as well as lateral loads in tilted towers. In the study of tapered diagrid structures, the angles of tapering range from 0 to 3 degrees. In the study of freeform diagrid structures, lateral stiffness of freeform diagrids is evaluated depending on the degree of fluctuation of free form. The freeform floor plans fluctuate from plus/minus 1.5 meter to plus/minus 4.5 meter boundaries of the original square floor plan. Parametric structural models are generated using appropriate computer programs and the models are exported to structural engineering software for design, analyses and comparative studies.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.71-76
• /
• 2010

Recently, the construction and plan of super-tall building is attention link of new town development or urban core regeneration. Super-tall Buildings have many advantages and a lot of affects in urban contexts. Also, construction of super-tall building is will be able to social problem like urban core's decline, loss of openspace, incompatible urban scape, traffic congestion of urban core. But, compares to super-tall buildings affects in urban contexts, there was not extra ordinary study about super-tall building by the urban scale approaches. Therefore, need about study materplan planning of the site which is made to meet super-tall building and urban contexts. There are two main processes in this study. First, to analyze the factors affect to masterplan planning of the super-tall building's site. Through the analyzed factors, classify type of super-tall buildings and identify the type's state. Second, to classify and set the elements of masterplan planning factor in the site. Identify the masterplan planning factor's state by deployment materplan planning factor set the current applied to the constructed super-tall buildings. Through this process, identified the recent trend and providied the basic elements of materplan planning of super-tall building's site.

• International Journal of High-Rise Buildings
• /
• v.1 no.2
• /
• pp.117-123
• /
• 2012

This paper discusses major strengths of tall buildings that distinguish them as sustainable solutions for the built environment. It sheds light on some of the key attributes of tall buildings as well as materials and technologies that could boost their performance environmentally, economically and technically as well as the natural habitats containing them. Tall buildings are portrait as major successful options for accommodating the ever increasing urban world population, with little negative impact on ecologies and environmental habitats worldwide. The role of tall buildings as 'vertical garden sub-cities' mitigating modern city problems of 'urban heat islands' and sprawling cities is explored. A few building examples as well as city developments are presented which represent the new generation of sustainable tall buildings that are setting trends for future projects incorporating innovations in materials and building systems and designs.

• International Journal of High-Rise Buildings
• /
• v.3 no.2
• /
• pp.89-98
• /
• 2014

Employing tilted forms in tall buildings is a relatively new architectural phenomenon, as are the cases with the Gate of Europe Towers in Madrid and the Veer Towers in Las Vegas. This paper studies structural system design options for tilted tall buildings and their performances. Tilted tall buildings are designed with various structural systems, such as braced tubes, diagrids and outrigger systems, and their structural performances are studied. Structural design of today's tall buildings built with higher strength materials is generally governed by lateral stiffness. Tilted towers are deformed laterally not only by lateral loads but also by dead and live loads due to their eccentricity. The impact of tilting tall buildings on the gravity and lateral load resisting systems is studied. Comparative evaluation of structural systems for tilted tall buildings is presented.

• International Journal of High-Rise Buildings
• /
• v.5 no.1
• /
• pp.13-20
• /
• 2016

Today's architecture can be best understood only through the recognition of pluralism, and, as is true of other building types, multiple design directions are prevalent for tall buildings. This contemporary design trend has produced many complex-shaped tall buildings, such as twisted, tilted and tapered form towers. Among many different structural systems developed for tall buildings, the outrigger system, with its inherent structural efficiency and flexibility in façade design, is widely used for contemporary tall buildings. This paper studies structural performance of outrigger systems employed for complex-shaped tall buildings. Twisted, tilted and tapered tall buildings are designed with outrigger structures, and their structural performance is investigated. For the twisted outrigger study, the buildings are twisted up to 3 degrees per floor. In the tilted outrigger study, the angles of tilting range from 0 to 13 degrees. The impact of eccentricity is investigated for gravity as well as lateral loads in tilted towers. In the study of tapered outrigger structures, the angles of tapering range from 0 to 3 degrees. Parametric structural models are generated using appropriate computer programs for these studies, and the models are exported to structural engineering software for design and analyses.

• Architectural research
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2002

Every year new tall buildings are being conceived, designed, and built with new schemes. Thus it is important to explore the factors that affect tall building design. Thus it is important to explore the tall building design factors. The planning and design of tall buildings require different criteria than those that exist in regular size buildings. Tall buildings are uniquely expressed by their structural systems where exterior esthetic and requirements of space drive the form and composition of the structural systems. Therefore the exploration of design factors is the key to achieve optimum building systems. Optimization as mentioned here is associated with the efficiency of the different building systems. To achieve an optimal system, there is a need for an understanding of the factors that affect on overall tall building design such as planning module, building function, lease span, floor-to-floor-height, building height (aspect ratio), structural system, environmental systems. In this paper a statistical approach will be used and will be based on data collected from the practice through a rigorous survey taken. This information is tabulated and analyzed. The major target of investigation will be lease span related to space requirement in the tall building planning. Factors related to lease spans, such as function, floor-to-floor height, planning module, building height, overall plan dimension, and plan ratio (building geometry), will be looked at carefully. IN conclusion, this approach of optimization can introduce a preliminary design guideline for tall building projects. The purpose of the paper should shed some light on the optimum tall building design criteria.