• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.8-15
• /
• 2008

Wastewoods (logging residues) generated in Korea were used to make lignocellulosic fillers for papermaking. Lignocellulosic fillers could play great roles to increase retention efficiency and thus decrease turbidity of white water in papermaking process. In addition, lignocellulosic fillers could be used to improve physical properties of paper through their high affinity to cellulosic fibers, leading to the less use of chemical additives like retention aids. Wastewoods including Pinus densiflora and Quercus variabilis were chemically and mechanically treated for making fine particles passing through 100 mesh wire. The newly generated fillers showed larger particle size distribution than ground calcium carbonates but similar distribution to talc. In particular, pretreatment by hot water was more effective to generate smaller particle size than by alkali treatment. Lignocellulosic particles mixed with ground calcium carbonates under intense hybridizing condition greatly contributed to surface coverage of organic fillers in addition to filling to lumen and pits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.8-13
• /
• 2012

The flexography ink has disadvantage in a deinking process because it tends to form too fine particles in alkali condition to be removed in flotation deinking. The influence of pH conditions on the particle size of phthalocyanine cyan ink used for flexo-printing was investigated to see the effect of pH conditions on flexography ink dispersion. Flexography ink particles prepared by grinding dried ink films were used in this experiment. Greater reduction of the ink particle size was noticed under alkaline pH condition, which was attributed to dissolution of resin component of the ink. Adsorption behavior of flexography ink onto pigment particles was examined using clay and talc as substrate pigments. Pretreatment of inorganic pigments with a cationic poly-DADMAC increased the surface adsorption of flexography ink particles, which improved the removal of the inks by centrifugal sedimentation of inorganic pigments. Most efficient removal of the ink particles was achieved when an optimal addition level of the cationic polymer was used for pretreatment of inorganic pigments, and this optimal addition level corresponds to the surface saturation point of the polyelectrolyte. Adsorption of flexography ink particles onto inorganic pigments improved the ink removal in flotation deinking since the pigment particles has the optimal particle size for flotation deinking.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.19-28
• /
• 1975

In order to obtain the superior refractory setter having better spalling resistance, cordierite was synthesized from domestic raw materials. Raw mixtures were fired between 125$0^{\circ}C$ and 140$0^{\circ}C$, and qualitative determination of crytallization was investigated by x-ray diffraction analysis. The results obtained are as follows; 1) The optimum batch composition of synthesized cordierite is 80.5% of Hadong kaolin (pink), 14% of Kyulsung tromolite talc and 5.5% of magnesia clinker, and the firing temperature is 1375$^{\circ}C$. 2) The composition of the refractory setter which exhibits the best values for the thermal properties is 40% of synthesized cordierite, 30% of kaolin chamotte(contains more than 60% of mullite), and 30% of Japanese clay. 3) The optimum particle size distribution of ternary mixture consists of 50% of coarse articles (3.327-1.168mm), 25% of intermediate particles (1.168-0.208mm) and 25% of fine particles (0.208-0.000mm).

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1188-1195
• /
• 1999

This study was conducted to determin basic mineral compositions, chemical components, description of particle size distribution and whiteness for 32 items of insoluble mineral substances, i.e., 3 items of diatomaceus earth, 1 item of kaolin, 10 items of bentonite, 13 items of acid clay, 3 items of talc and 2 items of perlite. The chemical components and XRD (X-Ray diffractometer) for insoluble mineral substances, were similar with those of the reported references except kaolin. However, whiteness was determined in 90% level for talc, diatomaceus earth and kaolin. The contents of heavy metals in insoluble mineral substances were determined as follows : Pb, $nd{\sim}23.10$ ppm ; Cd, $nd{\sim}0.67$ ppm ; Hg, $nd{\sim}0.58$ ppm ; As, $nd{\sim}1.42$ ppm ; Cu, $nd{\sim}39.35$ ppm. These data were significanty lower than the references.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.262-267
• /
• 2005

In order to commercialize Paenibacillus sp. AC-1 and to minimize its harmful side effects, four granular formulations were prepared using AC-1 powder, adjuvant, and carrier and then their physicochemical properties of the formulations were investigated. Out of the carriers tested, the best one was talc for the formulation. Viable cells was stabilized during the formulating process. Viable cells in the granules formulated with Paenibacillus sp. AC-1 powder were stabilized at storage temperature range ($4{\sim}50^{\circ}C$) after 12 weeks. The release rate of viable cells from granules into water under a static condition were eluted over 90% in 7 hours and breakdown rates of particle were 100% in 1 day. Among the tested formulations, granular formulation comprising of 20% of Paenibacillus sp. AC-1 powder, 7% of polycarboxylate as surface active agent, 1% of sodium polyacrylate as adjuvant, the rest as carrier showed to be best.

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.526-531
• /
• 2003

KR-31378 is a new drug candidate intended for the use in the prevention of ischemia-reperfusion damage. The objective of this preformulation study was to determine the physicochemical properties of KR-31378. The n-octanol to water partition coefficients of KR-31378 were 0.0504 at pH 3 and 0.8874 at pH 10. Accelerated stability of KR-31378 in solution and solid state was studied at 5, 40, $60^{\circ}C$. The stability testing indicated that the t90 for the drug in solid was estimated to be 2 years and 128.6 days at $25^{\circ}C$, while the that in aquesou solution was 68.6 days at $25^{\circ}C$. The KR-31378 was also found to be unstable under the relative humidity of 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of KR-31378 with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1:1 binary mixtures of KR-31378 and Aerosil, Avicel, Eudragit, lactose, PEG, talc, CMC, PVP, starch. As a result, CMC, PVP, and starch were found to be incompatible with KR-31378, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of KR-31378 powder was in the size range of 9-93 $\mu$ m with the mean particle size of 37.9 $\mu$ m. The flowability of KR-31378 was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Crystallization of the drug with a number of organic solvents did not lead a crystalline polymorphism. In addition, dissolution of the drug from the powder was adequately rapid at $37^{\circ}C$ in water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.52-57
• /
• 2012

In this study, we investigated the possible use of a new inorganic material as alternative filler in the paper industry. The inorganic material is a mineral composed of calcium sulfate, that is generated when manufacturing phosphate fertilizer. The inorganic material was dehydrated by the thermal treatment to $200^{\circ}C$, $500^{\circ}C$, $700^{\circ}C$, and $900^{\circ}C$ to prepare white filler powders. Their basic properties, including color, particle shape, elements, and average particle size were identified. To determine the effect of new inorganic filler on paper's physical properties and strength, handsheets were prepared from HwBKP, SwBKP, and thermal treated inorganic fillers. Handsheets' ISO brightness, opacity, bulk, breaking length, and stiffness were measured. Results confirmed that thermal treated inorganic filler could be beneficial to the bulk and opacity of paper while maintaining higher level of breaking length and stiffness that is achieved using talc.

• Archives of Pharmacal Research
• /
• v.26 no.12
• /
• pp.1002-1008
• /
• 2003

Ferulic acid (3-methoxy, 4-hydroxy cinnamic acid) is a flavoid component possessing antioxidant property. The compound is currently under development as a new drug candidate for the treatment of the dementia. The objective of this preformulation study was to determine the physicochemical properties of ferulic acid. The n-octanol to water partition coefficients of ferulic acid were 0.375 and 0.489 at the pHs of 3 and 10, respectively. Accelerated stability study for ferulic acid indicated that the t 90 value for the drug was estimated to be 459 days at $25^{\circ}C$. Ferulic acid was also found to be unstable under the relative humidity of more than 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of ferulic acid with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1: 1 binary mixtures of ferulic acid and typical pharmaceutical excipients (e.g., Aerosil, Avicel, CMC, Eudragit, lactose, PEG, PVP, starch and talc). Avicel, CMC, PVP and starch were found to be incompatible with ferulic acid, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of ferulic acid powder was in the size range of 10-190 $\mu$m with the mean particle size of 61 $\mu$m. The flowability of ferulic acid was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Two polymorphic forms were obtained by recrystallization from various solvents used in formulation. New polymorphic form of ferulic acid, Form II, was obtained by recrystallization from 1,4-dioxane. The equilibrium solubility for Form I was approximately twice of that for Form II. The dissolution rate of Form II was higher than that of Form I in the early phase (<6 min). Therefore, these physicochemical information has to be taken in the consideration for the formulation of ferulic acid.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2010

The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.15-24
• /
• 2001

The objective of this study it to evaluate the microbial safety in rapid sand filters adapted in most drinking water treatment plants. The potential pathogens to cause water quality problems Are presumed to be Giardia and Gryptosporidium. They look like particles in view of their size. It has been reported that if the number of particles (larger than 2 ${\mu}{\textrm}{m}$ in water) is less than 100 per mL and its turbidity is below 0.1 NTU, it is considered as a safe water in terms of pathogens. In order to achieve such a good water quality. filter-aids (chemicals) were added to the inlet-channel of filter and their effectiveness was evaluated on the basis of water quality factors such as turbidity and particle counting. This study was conducted in she three steps of experiment: jar test. pilot plant test and real water treatment plant test (P plant in seoul). The experiment reult of the P water treatment showed that cationic polyamine was the most effective in the removal of particles and turbidity at the does of 0.25 mg/L. The turbidity without filer-aids showed in the range of 0.12 ~0.17 NTU during filtration and 0.14 NTU on the average. However. with addition of polyamine, the turbidity represented below(or less than) 0.1 NTU after 20 min in the start of filtration and kept 0.08 NTU on the average. On the other hand, as for number of particles, while no filter-aids led to the range of 111 ~270 per mL and 190 on the average, addition of polydmine led to 113 per mL on talc average, and kept below100 per mL after 20 min in the start of filtration.