• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.436-438
• /
• 2003

Wind-induced oscillations are known to cause damage to the conductors and related hardware through fatigue, clashing of the bundled conductors and bolt loosening. Wake-induced oscillations have been known since the advent of bundled conductors, they are caused by aerodynamically unstable forces acting on the leeward conductors in the wake of the windward conductors, They take the form of horizontal galloping, snaking or rolling, in which case all subconductors move together in unison. They can also take the form of the subspan oscillation, which appear as elliptical motions of the subconductors moving out of phase, mainly in the horizontal plane within a subspan. In order to decrease amplitudes of the oscillation, this paper examines the application status of the spacer dampers and suggests proper installation methods.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.4
• /
• pp.435-446
• /
• 2021

This article examines the consequences of a significant spent fuel management decision or event in the United States, South Korea and Taiwan. For the United States, it is the financial impact of the Department of Energy's inability to take possession of spent fuel from commercial nuclear power companies beginning in 1998 as directed by Congress. For South Korea, it is the potential financial and socioeconomic impact of the successful construction, licensing and operation of a low and intermediate level waste disposal facility on the siting of a spent fuel/high level waste repository. For Taiwan, it is the operational impact of the Kuosheng 1 reactor running out of space in its spent fuel pool. From these, it draws six broad lessons other countries new to, or preparing for, nuclear energy production might take from these experiences. These include conservative planning, treating the back-end of the fuel cycle holistically and building trust through a step-by-step approach to waste disposal.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.53-62
• /
• 2008

The purpose of this research was to analyze the kinematics of the 205B movement in platform diving. For the experiment, 2 athlete from the national diving team were chosen as the subject and two S -VHS video cameras were used. For this diving players preparing for the olympics participated. It was shown that the mean total took $1.112{\pm}0.12s$. In order to perform better, the divers time must be increased, at take off and rotation must be done high up and the horizontal distance must be shorted to main entrance of the water. To enter the water safely, the jump has to be high, the horizontal speed slow and the vertical speed as fast as possible. At E1 the lower limbs change in speed should decrease and after the rotation begins at E2. At take off, the jump is more important than the rotation for the performance of the dive. At take off, the trunk angular velocity was high, and this was needed to jump high for moment of inertia for rotation because for efficient jumping the upper body has to spread out and increase the height of the center of mass.

• Journal of Korean Public Health Nursing
• /
• v.20 no.1
• /
• pp.57-68
• /
• 2006

Purpose: To identify perimenstrual discomforts, coping and relief of symptoms in female workers. Methods: A convenience sample of 203 women who had worked were obtained from two hospitals in Busan. Data were collected through questionnaires from November 8 to 16, 2004. Three instruments were used in this study: the Perimenstrual Discomfort Questionnaire by Park(1988) and the Menstrual Coping Questionnaire and the Relief of Symptoms by Billings & Moos(1981) modified for this study. The data were analyzed by descriptive statistics, t-test, and ANOVA with SPSS 10.0 program. Results: The prevalence rate of dysmenorrhea was 81.3%. The total mean score for perimenstrual discomforts was 2.83 out of a possible total of 5 and the mean score for each category was, 3.08 for water retention, 2.95 for pain, 2.88 for negative affect, 2.83 for behavioral change, 2.73 for autonomic reactions, and 2.51 for concentration. According to these study results, statistical differences were found for age(F=2.76, p=0.04), feeling to menstruation(F=3.94, p=0.00), dysmenorrhea(t=4.26, p=0.00), and taking medication(t=2.09, p=0.00). The coping modes with the highest scores were 'take a hot bath'(99.0%)', 'rest and go to bed'(83.7%), 'regard menstruation as a physiological and temporary phenomenon'(76.8%), 'take a warm shower'(65.0%). The most frequently used methods to relieve symptoms were 'rest and go to bed'(70.0%), 'take a warm shower'(57.6%), 'take pain killers'(49.8%), 'apply hot water bag on painful parts of the body'(46.8%). Conclusion: Further research is needed to understand perimenstrual discomforts and the variables associated with them. Nursing intervention has to be considered in any program aiming to reduce perimenstrual discomforts.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.2
• /
• pp.217-226
• /
• 2018

Objectives: The purpose of this study is to find out differences in oral health status, defined as their oral health and oral health quality of life among the elderly depending on their income and education levels. Methods: This study used 922 senior citizens over 65 from the data (2015) of the 6th National Health and Nutrition Survey (NHNS). The regression analysis was adopted to identify factors affecting their oral health status which has effect on their oral health quality of life. The statistical package SPSS 21.0 was employed. Frequency analysis, chi-squared analysis and regression analysis were used, and the significance level or Cronbach's alpha value was 0.05. Results: Depending on income levels, there were differences in their oral health status as to whether they use oral hygiene products, take dental examinations, join private health-insurances, and delay dental treatments or not. And educational levels also made significant differences in their oral health status as to whether they smoke, drink alcohol, how many times they brush teeth a day, whether they use oral hygiene products, take dental treatments, and join private health-insurances. Regression analysis on the relationship between their oral health status and the oral health quality of life showed that there were significant differences depending on whether they take dental treatments, delay dental medical treatments, smoke, take oral examinations, how many times they brush teeth a day, and whether they use oral hygiene products, or join private health-insurances. Conclusions: The study shows that a comprehensive plan is needed to raise attention on proper oral health-care and ultimately to improve the quality of life by considering the daily number of tooth brushing, oral hygiene product use, regular dental treatments, and other medical uses.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.327-334
• /
• 2022

The purpose of this study was to analyze the impact on people's willingness to take korean medicine based on the perception of korean medicine treatment effects by disease, and provide basic data when the herbal medicine (pharmacology) health insurance pilot project is carried out. The survey 'Usage and Consumption of Korean Medicine Report in 2017' was used, and frequency analysis, chi-square test, and logistic regression analysis were conducted on 3,032 people. Logistic regression results showed that the perception of herbal treatment effects on digestive diseases and arthritis was a significant factor in the future intention to take korean medicine. As the herbal medicine health insurance pilot project aims to popularize herbal medicine treatment through the management of the quality of korean medicine by incorporating it within the system, it is necessary to consider highly acceptable digestive diseases and arthritis when expanding target diseases.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.146-153
• /
• 2013

This study was conducted to enhance graft-take ratio and quality of grafted tomato seedlings by controlling temperature and humidity during the healing and acclimatization processes. Three temperature levels ($20^{\circ}C$, $23^{\circ}C$, and $26^{\circ}C$) were carried out to determine optimum temperature on four rootstocks. In addition, twelve combinations of three relative humidity levels (70%, 80%, and 90%) and four temperature levels ($17^{\circ}C$, $20^{\circ}C$, $23^{\circ}C$, and $26^{\circ}C$) were set up to evaluate the effect of relative humidity and temperature on the graft-take ratio of grafted seedlings. In the other hand, five relative humidity periods (H0, H1, H2, H3, and H4: 90% relative humidity for first 0, 1, 2, 3 and 10 days and afterwards relative humidity was reduced to 70%, respectively) were examined effect of relative humidity periods on the graft-take and quality of grafted seedlings. The higher graft-take ratios (84.0~87.4%) were showed at $23^{\circ}C$ compared to $20^{\circ}C$ and $26^{\circ}C$ in all rootstocks. Graft-take ratios decreased and number of diseased plants increased at high temperature. The graft-take ratios increased with increasing relative humidity in all temperature levels on the $3^{rd}$ and $7^{th}$ day after grafting. However, increasing relative humidity significantly increased percent of diseased plants. The graft-take ratio reduced at ($26^{\circ}C$) and ($17^{\circ}C$) temperature under all relative humidity conditions. The graft-take ratio increased with increasing period of 90% relative humidity. Maximum graft-take ratios were observed in H2 and H3 treatments. Graft-take ratio decreased with increasing 90% relative humidity for 10 days (H4). Diseased plants had not been found in H0, H1, H2, and H3 treatments. Seedling quality was improved through increasing fresh and dry weight of root, compactness, and root morphology of tomato seedlings in H2 and H3 treatments. Therefore, high relative humidity (90%) for first 2 or 3 days and afterwards reduced low relative humidity (70%) at $23^{\circ}C$ condition during healing and acclimatization promoted the graft-take and quality of grafted tomato seedlings.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.155-170
• /
• 2004

Among the semiconductor If-chips, unlike memory chips, a majority of Application Specific IC(ASIC) products are produced by customer orders, and meeting the customer specified due date is a critical issue for the case. However, to the one who understands the nature of semiconductor manufacturing, it does not take much effort to realize the difficulty of meeting the given specific production due dates. Due to its multi-layered feature of products, to be completed, a semiconductor product(called device) enters into the fabrication manufacturing process(FAB) repeatedly as many times as the number of the product specified layers, and fabrication processes of individual layers are composed with similar but not identical unit processes. The unit process called photo-lithography is the only process where every layer must pass through. This re-entrant feature of FAB makes predicting and planning of due date of an ordered batch of devices difficult. Parallel machines problem in the photo process, which is bottleneck process, is solved with restricted roll out algorithm. Roll out algorithm is a method of solving the problem by embedding it within a dynamic programming framework. Restricted roll out algorithm Is roll out algorithm that restricted alternative states to decrease the solving time and improve the result. Results of simulation test in condition as same as real FAB facilities show the effectiveness of the developed algorithm.

• Advances in concrete construction
• /
• v.3 no.2
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• East Asian Economic Review
• /
• v.27 no.3
• /
• pp.213-242
• /
• 2023

This paper investigates whether the price of cryptocurrency is determined by the US dollar index, the price of investment assets such gold and oil, and the implied volatility of the KOSPI. Overall, the returns on cryptocurrencies are best predicted by the trading volume of the cryptocurrency both in-sample and out-of-sample. The estimates of gold and the dollar index are negative in the return prediction, though they are not significant. The dollar index, gold, and the cryptocurrencies seem to share characteristics which hedging instruments have in common. When investors take notice of the imminent market risks, they increase the demand for one of these assets and thereby increase the returns on the asset. The most notable result in the out-of-sample predictability is the predictability of the returns on value-weighted portfolio by gold. The empirical results show that the restricted model fails to encompass the unrestricted model. Therefore, the unrestricted model is significant in improving out-of-sample predictability of the portfolio returns using gold. From the empirical analyses, we can conclude that in-sample predictability cannot guarantee out-of-sample predictability and vice versa. This may shed light on the disparate results between in-sample and out-of-sample predictability in a large body of previous literature.