• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.85-92
• /
• 2003

Generally, ordinary portland cement(OPC) is widely used for grouting to reduce permeability of ground under the foundations of structures. But, it is hard to be injected into the microscopic voids, fissures and crevices in soil or rock formation for the OPC material. Therefore new method what is called MSG(Micro Silica Grouting) has been developed recently to improve the weak point of the OPC material. In this case study, in order to verify performance of the MSG's water cut-off, trial injections were performed in rear of CIP(Cast in Place Pile) on the site A(weathered soil) and B(alluvial soil) that are constructed for the subway No. 9 nowadays. To take the proper grouting method of the MSG in the trial injecting, the injections are carried out for grouting types(constant pressure or fixed Quantity) and grouting methods(1.5shot or 2.0shot) and to confirm the effects of water cut-off and the injection range of the MSG, the tests of permeability and indicator(phenolphthalein) response were performed before and after the injection. Through the tests results, we could affirm the effects of water cut-off of the MSG and the injection range for the weathered and alluvial soil layers near the Han River. Finally we could make sure the application of the MSG method in actual construction under the layers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.735-742
• /
• 2016

The Low-Rate WPAN is a short range wireless networking technology characterized by low-rate, low-power, low complexity and low-cost. The LR-WPAN controls wireless channel access among network devices based on the contention-based CSMA/CA algorithm. Therefore, frame collisions may take place at any time, leading to the severe degradation of network performance. This paper proposes a new algorithm that changes back-off periods adaptively in the CSMA/CA process depending on network conditions, resulting in the reduction of frame collisions. Throughout extensive simulations, it turns out that varying the back-off periods dynamically shows better performance than maintaining the fixed back-off periods.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.282-289
• /
• 2007

While demands for express couriers service are rapidly increasing due to recent progress of electronic commerce, express courier service companies are struggling to take a larger market share through ongoing improvement in their service processes. Cut-off time is the time limit that all orders delivered before the limit are guaranteed for the delivery within the very next day. Extending cut-off time for express service centers can provide the express company with increase of total sales, but it may also cause increasing the possibility not to satisfy customer needs due to work delay in the consolidation terminal. We develop a design model for express courier service network based on a recursive optimization/simulation procedure. With the optimization model, we seek key design parameters such as the cut-off time for express service centers and the capacity of the consolidation terminal maximizing total sales profit while satisfying the desired level of performances. With the simulation model, we consider the dynamic nature of the network and obtain relationships between the design parameters and the performance measures with the multiple linear regression. The validity of the model is examined with an example.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.45-52
• /
• 2021

The capital structure is one of the hot financial topics among researchers and scholars. Its importance comes from the fact that capital structure is closely related to companies' ability to meet different stakeholders' needs. A suitable capital structure will boost the business and create a competitive advantage in the context of fierce competition. Many companies choose an optimal debt level based on the trade-off between interest and debt costs. This study aimed to test the existence of trade-off theory in capital structure, the case of Vietnam's real estate companies, which are growing very fast recently. Instead of considering constant optimal leverage to test the trade-off model, we take advantage of the dynamic capital structure determined by growth opportunities, profitability, tax incentives, tangibility, liquidity, and firm size. The dynamic panel data regression was estimated by the system Generalized Method of Moment (Sys-GMM). The empirical evidence showed that real estate companies listed in the Vietnamese stock market might change their leverage toward a target capital structure determined by influential factors in a long-term perspective. In particular, the debt-to-asset ratio will change by approximately 14 percent, positively, in response to the difference between the current debt-to-asset ratio and the dynamic target debt-to-asset ratio.

• The Korean Journal of Applied Statistics
• /
• v.9 no.2
• /
• pp.161-169
• /
• 1996

In the design of the sampling, it is important to make a decision about the size of the sample to be selected from the population. We often have a problem to get the optical size of the sample to be considered for cost and time expended for selecting sample unit from highly skewed population. In this case, we give a graphical criterion with Take-all Stratum rate to choose a method and also illustrate the efficiency between the Neyman allocation and the cut-off method with real data.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.26 no.2
• /
• pp.136-143
• /
• 2019

Purpose: The feasibility and differential effects of two music therapy methods (interventions with preferred music vs. classical relaxation music) were done to examine the effects on agitation and anxiety in patients weaning off mechanical ventilation. Methods: This pilot study was conducted using a crossover design. Six patients listened to preferred music choices and classical relaxation music. Anxiety scores were measured using the Richmond Agitation Sedation Scale (RASS), State-Trait Anxiety Inventory (STAI), and visual analog scale (VAS). Results: Patients showed a significant decrease in agitation and anxiety after both the preferred and classical relaxation music interventions. The difference in the effects of preferred music and that of classical relaxation music was not significant. As for feasibility, patients exhibited a change in agitated behaviors after the music interventions by not trying to take off medical devices and quietly listening to the music, and by smiling and moving lips along with the lyrics while listening. Conclusion: Music interventions which centered on either patients' preferences or classical relaxation music to enhance relaxation, helped reduce agitation and anxiety during the mechanical ventilation weaning process.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.73-78
• /
• 1971

The purpose of this study is to find out the method of conditioned weight test by which the dealing weight of raw silk can be calculated from true fiber in order to do the fair trading. The results of this study were as follows. 1. It is more reasonable than the current test that conditioned weight as a dealing weigh can be calculated by boil-off and moisture regain which is a percentage of boil-on and moisture regain to net weight. Because the boil-off and moisture regain can show directly the amount of true fiber and reproductibility in raw silk. In this study the boil-off and moisture regain is to take dry weight after boiling-off from net weight. 2. To calculate the conditioned weight from boil-of and moisture regain it would be proper that the standard additional ratio is 44 per cent of dry weight after boiling-off. 3. Boil-of percent of the sizing sample skein used in the size test did not show a statistical significance comparing with the boil-off percent of sample skeins (24 skeins) which may represent that of a lot. To observe this result boil-off percent of the sizing sample skein may represent that of a lot. 4. In Korea if conditioned weight test substitute for test of boil-off and moisture regain, we make a profit of two billion won in a year at the current market-price.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2016

In order to convert wave energy into large quantities of high-efficiency power, it is necessary to study the optimal converter system appropriate for the environment of a specific open ocean area. A wave energy converter system with a counterweight converts the translation energy induced from the heave motion of a buoy into rotary energy. This experimental study evaluated the primary energy conversion efficiency of the system, which was installed on an ocean generating basin with a power take-off system. Moreover, this study analyzed the energy conversion performance according to the weight condition of the buoy, counter-weight, and flywheel by changing the load torque and wave period. Therefore, these results could be useful as basic data such as for the optimal design of a wave energy converter with a counterweight and improved energy conversion efficiency.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.124-132
• /
• 2015

When Building Information Modeling (BIM) was introduced at the early stage, it was only utilized as a three-dimensional visualization tool. Nowadays, however, BIM is being studied for increasing design productivity and managing enormous information on building life cycle. One of the representative research is developing 'common prototype BIM libraries'. BIM data made of common prototype libraries should be utilized in various ways, quantity takeoff, code checking, energy analysis and so on. However, common prototype BIM libraries are not enough to estimate accurate cost. For example, composite wall libraries should be divided into several single objects, wall structure and finishes, for the quantity takeoff and construction cost calculation. In this paper, we are suggesting an automated division algorithm of composite wall and developing a system prototype for it. This study is expected to reduce extra modeling work and contribute to fast and accurate cost calculation in the construction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.495-503
• /
• 1992

The internal and external outputs of the agricultural sub-systems of mixed livestock-crop farms in Pabna Bangladesh were analysed, to clarify the multiple functions of cattle in farm systems. Production systems with grazing areas were relatively more productive than those with no grazing. There was a tremendous variation in farm income, largely because of land area. An increase of one ha in land area was estimated to boost farm income by about 50%. Number of cattle, cattle off-take percentage and milk off-take per average cow related positively to farm income. As land area decreased the relative importance of cattle production increased. Crops were dominant in producing food for home consumption. Cattle contributed only 5-6 per cent to home consumption. Cattle supplied a significant cash income: 45 per cent in the villages with grazing areas and 57 per cent in the other villages. In future, the cash output from cattle will decline and emphasis will shift to the role of cattle in supporting crop production. Any research or development strategy for livestock needs to focus first on the importance of the complex relation between livestock and crops.