• 광물과산업
• /
• 제28권
• /
• pp.1-13
• /
• 2015

본 연구에서는 몽골에서 채취한 텅스텐으로 부터 고품위 텅스텐 정광을 생산 할 수 있는 선별공정 개발연구를 수행하였다. 선별비용 절감과 선별효율 향상을 위해 먼저 조립 산물에서 지그선별에 의해 정광산물을 회수한 다음, 단체분리도의 향상을 위해 재 분쇄 하였다. 이것을 가지고 shaking table을 적용하여 비중이 낮은 맥석광물들을 제거하였다. 이때 회수 된 중광물에는 텅스텐과 비중은 비슷하나, 비자성인 주석이 함께 수반되어 있어 이들의 제거를 위하여 건식 자력선별법을 적용하여 최종 텅스텐 정광을 회수하는 공정을 개발하였다. 본 연구에서 개발된 선별공정을 적용한 실험결과, 최적실험 조건에서 $WO_3$의 품위와 회수율이 각각 67.63%와 86.07%인 최종 정광을 얻었다.

• 전자공학회논문지CI
• /
• 제47권3호
• /
• pp.36-41
• /
• 2010

본 논문에서는 다단계 특성벡터 기반의 분류기 모델(Multistage Feature-based Classification Model: MFCM)의 성능을 향상시킨 진보된 형태의 MFCM (Advanced MFCM: AMFCM)을 제안하는데, AMFCM은 MFCM과 같이 주어진 데이터에서 추출된 전체의 특징벡터를 연결하여 이용하지 않고, 같은 성질의 특징벡터들끼리 모아서, 각각의 국지적 학습기를 통하여 분류에 이용한다. 그러나, AMFCM은 MFCM에서 사용되는 각각의 국지적 분류기를 위한 각 특징벡터의 분류기여도를 더욱 섬세하게 조정하여 최종적인 분류의 정확도를 높이는 방안을 제안한다. 제안된 AMFCM의 성능을 검증하기 위하여, 음악장르 분류의 문제에 대한 실험을 진행하였다. 또한, 국지적 분류기로 Self-Organizing Map과 중심 신경망을 사용하여 실험을 수행하였는데, 제안된 AMFCM은 사용된 국지적 분류기의 종류와 사용된 군집의 개수에 따라 기존의 MFCM에 비해 평균 8% - 15% 이상의 성능향상을 보여 준다.

• 동아시아식생활학회지
• /
• 제25권2호
• /
• pp.372-385
• /
• 2015

The purpose of this study was to develop and evaluate a nutritional education program for preschool children in association with Center for Children's Foodservice Management, childcare facilities and home in order to provide nutritional knowledge and change food attitudes in children. The program was repeated three times using the same educational theme and consisted three steps. Step 1 involved visiting education with teaching tools by a dietician. Step 2 involved home education with a worksheet and participating in events with parents. Step 3 involved repeated education with a textbook by a preschool teacher education reports sent to the center. The subjects of this study were 3 to 5-year-old children at 89 childcare facilities located in Busanjingu. Interest in meals at childcare facilities, dietary guidance for parents of children, and dietary attitudes of children were evaluated before and after education. Number of parents interested in meals managed by childcare facilities (kitchen visiting, meals observation, progress of children's education) increased after education. Mean scores for meal awareness in parents in the form of three questions (proper food distribution, hand washing before mealtime, nutritional and hygienic satisfaction with meals) significantly (p<0.05) increased after education. Mean dietary guidance for parents' scores for all questions except table manner significantly (p<0.01) increased after education. Mean dietary attitudes for children in the form of six questions (try to eat various vegetable, eat meals without leaving, wash hands before mealtime, eat cleanly, reduce sodium intake and keep table manner) also significantly (p<0.001) increased after education. As a results, the nutritional education program applied in this study, positive influenced children's nutritional knowledge and dietary attitudes, and parents' dietary guidance of children.

• 한국가구학회지
• /
• 제26권4호
• /
• pp.314-327
• /
• 2015

20th century, beginning of modern, the style of art and design, separated reasonable and sensitive code. Art form including cubism, constructivism, futurism and different form including fauvism, expressionism, surrealism and abstract expressionism coexist two code in early modern. But the style of design was separated each period with geometric and organic form, reasonable and sensitive code. Replacement timing on two design style was the transition period of the production-oriented step to the sale-oriented step in marketing. In early stage modern it was stable production-oriented step. Geometric style include G. Rietvevld (Red and Blue chair), M. Breuer (Wassily chair), Fanizon and Martinelli (I-Ching) was simple and functional, received the absolute support. An aggressive demand generation and sales promotion for the design change was needed so that excess supply in the market with a stable production. In sale-oriented step for sales promotion in mid modernism, it was accepted transitions to the sensual organic volume with elegant and sleek style include C. Eames (LCW chair), V. Panton (Panton chair) and C. Mollino (Arabesco Tea table).

• Coupled systems mechanics
• /
• 제2권2호
• /
• pp.175-190
• /
• 2013

Pounding damage has been observed frequently in major earthquakes in the form of aesthetic, minor or major structural cracks and collapse of buildings. Studies have identified a building located at one end of a row of buildings as very vulnerable to pounding damage, while buildings in the interior of the same row are assumed to be safer. This study presents the results of a shake table investigation of pounding between two and three buildings in a row. Two steel portal frames, one stiffer and another more flexible, were subjected to pounding against a frame with eight other configurations. Three pounding arrangements were considered, i.e., the reference frame (1) on the right of the second frame, (2) in the middle of two identical frames, and (3) on the right of two identical frames. Zero seismic gap was adopted for all tests. Five different ground motions are applied from both directions (right to left and left to right). The amplification of the maximum deflection due to pounding was calculated for each configuration. The results showed that, for the stiffer building in a row, row building pounding is more hazardous than pounding between only two buildings. The location of the stiffer frame, whether at the end or the middle of the row, did not have much effect on the degree of amplification observed. Additionally, for all cases considered, pounding caused less amplification for stronger ground motions, i.e., the ground motions that produced higher maximum deflection without pounding than other ground motions.

• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.63-70
• /
• 2003

본 논문에서는 반도체 제조장비의 핵심 부품 중에 하나인 질량유량제어기(MFC, Mass Flow Controller)클 설계하고 구현하였다 Microchip社의 마이크로콘트롤러(Microcontroller) PIC 16F876을 사용하여 개발된 MFC는 여러가지 문제점을 가진 아날로그(Analog) 방식의 MFC와 고가의 DSP(Digital Signal Processor) 및 고분해능의 AD변환기(Analog to Digital Convertor)를 사용하는 디지털 MFC의 장점을 혼합한 하이브리드형(Hybrid-Type)이다. 본 논문에서 개발된 MFC는 크게 센서부(Sensor Unit), 제어부(Control Unit), 구동기부(Actuator Unit)로 구성되었으며, 성능향상을 위한 자동보정(Automatic Calibration) 알고리즘과 표준테이블(Reference Table) 방식을 사용하였다.

• 대한치과의사협회지
• /
• 제10권3호
• /
• pp.155-158
• /
• 1972

As a factor of dentistry, the form of the tooth especially the size plays an important part. And in orthodontics the relation between the tooth size, arch length and the basal arch is regarded important, and it is closely related to the extraction and retension probolem in treatment planning. The auther's study of the mesio-distal crown diameters of permanent teeth, width and length of the dental arch and basal arch from the cast of 50 men and 53 women who could be measured clerly, among 102 men and 107 women regarded as the normal occlusion showed the followings. 1. Table 1 and table 2 showed the measurement of the mesio-distal maximum width of the permanent teeth, width and length of the dental arch and basal arch of the upper and lower dentitions. 2. Men's mesio-distal width of the teeth, arch length and arch width of the upper and the lower dentition, basal arch width and basal arch length are larger than those of wonen's 3. We compared the Koreans with the American white. Upper central incisors, upper first molars and lower second premolars of the latter were larger than those of the former. And the Koreans's rest tooth of the rest were comparatively larger.

• 한국지반신소재학회논문집
• /
• 제17권3호
• /
• pp.33-46
• /
• 2018

본 논문에서는 대심도 굴착시 흙막이 벽체에 대한 실내 모형실험 결과를 다루었다. 지반의 지하수위와 벽체의 강성등의 영향인자가 흙막이 벽체 및 지반 거동에 미치는 영향에 대한 정성적 고찰을 위하여 기존 CIP 벽체와 CS-H벽체의 휨강성에 따른 상사법칙을 적용하여 제작 및 사용하여 모형실험을 수행하였으며, 실제 현장을 모사하여 버팀보 설치 및 굴착을 진행하였다. 또한 벽체, 지반 거동 분석을 위하여 PIV 분석을 수행하였으며, 벽체변위, 지반침하 및 지반 수평변위를 분석하여 지하수위가 높아질수록 벽체 강성이 작아질수록 변위가 커지는 것을 확인하였다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제4권1호
• /
• pp.55-66
• /
• 1998

This paper presents a simple method for relieving the ambiguity problems within the sub-voxel based surface-fitting approach for the surface construction. ECB algorithm is proposed to avoid the ambiguity problem which is the root of the holes within the resulting polygon based approximation. The basic idea of our disambiguation strategy is the use of a set of predefined modeling primitives (we call SMP) which guarantees the topological consistency of resulted surface polygons. 20 SMPs are derived from the extension of the concept of the elementary modeling primitives in the CB algorithm [3], and fit one to five faces of them to the iso-surface crossing a cell with no further processing. A look-up table which has a surface triangle list is pre-calculated using these 20 SMPs. All of surface triangles in the table are from the faces of SMPs and are stored in the form of edge list on which vertices of each surface triangle are located. The resulted polygon based approximation is unique at every threshold value and its validity is guaranteed without considering the complicated problems such as average of density and postprocessing. ECB algorithm could be free from the need for the time consuming post-processing, which eliminates holes by revisiting every boundary cell. Through three experiments of surface construction from volume data, its capability of hole avoidance is showed.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.684-690
• /
• 2010

A drum cam with rotational follower has a cam mechanism and it is mainly used in its application such as index table and ATC of machine tool. Also its use can reduce the backlash in its kinematic movement. To machine the drum cam with rotational follower, 5-axis CNC machine tool is generally used and its kinematic principle is included in it's design. Until now, the commercialized CAM software can't cover the application of the drum cam machining. Even if, some special software was developed for machining a drum cam, the post processing method for finish machining was not developed yet. And to overcome the problem, the form tool is still used on the tool path of rough machining. This study includes the induction of the post processing technique for the finish machining of drum cam on three 5-axis CNC machine tools, type AC, AB and BC. To prove the finishing geometric profile, the result was clearly verified through inspection and geometric measurement after direct machining of the drum cam in AC type 5-axis machine tool in this study.