• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
• /
• pp.23-23
• /
• 2003

To evaluate clinical visualization of intracranial aneurysms between 3D-TOF MRA with 3.0T MR and CTA with 16-slices MDCT. In a prospective series, 12 patients with 16 aneurysms were studies with 3D-TOF MRA and CTA. MRA were performed on a GE Signa 3.0 T system (Signa VH/i, GE) with 25/3/20 (TR/TE/FA). CTA were peformed on a 16 slice MDCT (Sensation 16, Somatom, Siemens) with IV shooting of 80 ml iodinated contrast mediumat antecubital vein at a rate of 3.5 ml/sec. Four among 12 patients underwent DSA for surgery. Size, shape, neck and parent vessel of aneurysms were evaluated for comparison of visualization and detectability of aneurysms.

• 전자통신동향분석
• /
• 제8권4호
• /
• pp.23-36
• /
• 1993

기존의 공장 자동화용 통신 프로토콜로서 MAP 이 표준화되어 널리 사용되어 오고 있으나, 이는 중소기업에서 수용하기가 적합하지 않다. 따라서 Cell 레벨의 규약인 Mini-MAP 프로토콜에 기초한 산업용 네트워크를 정의하고 이에 따라 중소기업형 공장자동화 시스템을 구성하였다. 산업용 네트워크는 호스트 컴퓨터와 주스테이션, 부스테이션 등으로 이루어지며, 여기에서는 산업용 네트워크의 마스터 역할을 하는 주스테이션의 구조와 프로토콜 운영 절차 등을 설명하였다.

• Clinical and Experimental Pediatrics
• /
• 제46권12호
• /
• pp.1186-1193
• /
• 2003

목 적 : 염색체 취약부위는 세포를 특정의 화학물질에 노출시키거나 특수한 배양조건에서 배양 할 때 쉽게 파열되는 염색체상의 특정구역이다. 취약부위는 유전성질환 및 악성종양과 관련이 있으며, 현재에는 분자생물학적 실험기법의 개발로 분자수준에서 이해가 되고 있다. 새로운 취약부위 및 취약부위의 발현을 높이거나 쉽게 관찰할 수 있는 실험실적 조건을 알아보기 위하여 항암제로 사용되는 Ara-C를 이용하여 염색체파열을 조사하여 보았다. 한편 염색체 취약부위가 종양형성과 관련이 있다는 사실에 기초하여 Ara-C에 의해 발열되는 취약부위와 암유전자가 위치하는 부위 및 종양에서 일정하게 염색체변이가 관찰되는 특정의 염색체 부위와의 상관관계도 알아보고자 하였다. 방 법 : 정상 성인 남녀 각각 3명의 말초혈액 내 T-림프구를 세포배양 후 Ara-C를 첨가하고 다시 caffeine을 처리한 뒤 종전에 시행했던 방법과 동일하게 검체 처리하여 염색체파열 부위를 관찰하였다. 염색체 취약부위는 염색체상의 일정부위에서 100개의 염색체파열 당 2회 이상의 염색체파열이 6명 중 4명 이상에서 관찰되는 경우로 정의하였다. 결 과 : 1) T-림프구를 엽산이 부족한 MEN-FA 배지에서 배양 시 Ara-C는 100개의 분열세포 당 252.1개의 염색체파열을 유도하였으며, Ara-C를 처리하지 않은 대조군에서 25.2개가 관찰되어 Ara-C를 처리한 경우에 염색체파열이 의미 있게 많았다(P<0.05). 2) Ara-C에 의한 염색체파열은 엽산이 부족한 MEM-FA 배지에서 엽산이 충분한 RPMI 1640 배지에서 보다 많이 되었다(P<0.05). 한편, 2.0 mM 농도의 caffeine은 엽산만 부족한 배양 배지에서는 염색체파열을 상승시키지 못했으나, Ara-C와 병행사용 시 상승시켰다. 3) Ara-C에 의해 가장 많이 파열된 부위는 3p14.2.이었으며, 발현된 취약부위는 20부위였다. 4) 발현된 취약부위 중 7 부위는 JUN, SKI, REL, N-MYC, FHIT, MET, ETS-1, FOS의 암유전자가 위치하는 부위와 일치하였으며, 15부위는 급성림프구성백혈병, 급성골수성백혈병, 만성림프구성백혈병, 골수이형성성증, 악성흑색종, 신경모세포종, 소세포성폐암, 난소암, 유전성 신장암, 혼합성 지방육종시 염색체상에 이상이 있는 부위와 일치하였다. 결 론 : S기 특이성 항암제인 Ara-C는 정상성인의 T-림프구를 엽산이 부족한 MEM-FA배지에서 배양시 염색체 파열을 대조군에 비해 의미 있게 유도하였다. 한편으로 Ara-C 특이성 염색체 취약부위는 암유전자가 위치하는 부위 및 특정 종양에서 관찰되는 특이한 염색체변이가 있는 부위와 상당 예에서 일치하여 아직 알려지지 않은 암유전자를 찾거나 분석하는데 기초적인 자료를 제공할 뿐 아니라 염색체변화와 종양형성과정의 상관관계를 이해하는데 도움이 될 것으로 사료된다.

• Advances in concrete construction
• /
• 제6권1호
• /
• pp.47-68
• /
• 2018

This article reports the utilization of fly ash (FA) waste product from industry and silpozz which is an agro-waste from agriculture as an environmental friendly material in construction industry. The evaluation of strength and durability study was observed using FA and silpozz as a partial replacement of Ordinary Portland Cement (OPC). The studied parameters are compressive strength, flexural strength, split tensile strength and bond strength as well as the durability study involves the acid soluble chloride (ASC), water soluble chloride (WSC), water absorption and sorptivity. Scanning electron microscopy (SEM) and XRD of selected samples are also done. It reveals from the test results that the deterioration factor (DF) in compressive strength is 4% at 365 days. The DF of split tensile strength and flexural strength is 0.96% and 0.6% at 90 days respectively. The minimum slip is 1mm and 1.1mm after 28 days of testing bond strength for NWC and SWC sample respectively. The percentage decrease in bond strength is 10.35% for 28 days SWC samples. The pre-cast blended concrete samples performed better to chloride diffusion. Modulus of elasticity of SWC samples are also studied.The water absorption and sorptivity tests are conducted after 28 days of curing.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.109-112
• /
• 2003

인터넷 사용중 인쇄를 하였을 때 만족스러운 결과를 가지지 못하는 것은 스크린 상의 page와 인쇄물의 page들이 다르게 나타나기 때문이다. HTML과 CSS는 브라우저 기반의 정보를 표현하는데 있어 적합하고 충분하지만, 인쇄기 반의 정보를 표현하는데는 부족하다. 그래서 사용되는 것이 XSL-FO(XSL Formatting Object) 이다. 고품질의 출력과 출력장치에 무관한 인쇄에 있어서 PostScript가 사용되고 있다. 본 논문에서는 XML-FA 와 Postscript의 장점을 이용해 사용자가 원하는 결과물을 갖는 것과, XML문서의 XML-FA 와 Postscript의 Segment간의 대응 관계를 분석하고 매핑시킴으로써 Postscript로 변환의 기술을 연구하였다. 변환 결과로 기존 인쇄물 보다 더 나은 결과물을 얻을 수 있었다.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.209-218
• /
• 2019

This study proposes a new approach to Control the Orientation and position based on obstacle avoidance technology by multi sensors fusion and autonomous travelling control of mobile robot system for implimentation of Smart FA. The important focus is to control mobile robot based on by the multiple sensor module for autonomous travelling and obstacle avoidance of proposed mobile robot system, and the multiple sensor module is consit with sonar sensors, psd sensors, color recognition sensors, and position recognition sensors. Especially, it is proposed two points for the real time implementation of autonomous travelling control of mobile robot in limited manufacturing environments. One is on the development of the travelling trajectory control algorithm which obtain accurate and fast in considering any constraints. such as uncertain nonlinear dynamic effects. The other is on the real time implementation of obstacle avoidance and autonomous travelling control of mobile robot based on multiple sensors. The reliability of this study has been illustrated by the computer simulation and experiments for autonomous travelling control and obstacle avoidance.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.369-376
• /
• 2019

A complete solution for a soluble-boron-free (SBF) small modular reactor (SMR) is pursued with a new burnable absorber concept, namely centrally-shielded burnable absorber (CSBA). Neutronic flexibility of the CSBA design has been discussed with fuel assembly (FA) analyses. Major design parameters and goals of the SBF SMR are discussed in view of the reactor core design and three CSBA designs are introduced to achieve both a very low burnup reactivity swing (BRS) and minimal residual reactivity of the CSBA. It is demonstrated that the core achieves a long cycle length (~37 months) and high burnup (~30 GWd/tU), while the BRS is only about 1100 pcm and the radial power distribution is rather flat. This research also introduces a supplementary reactivity control mechanism using stainless steel as mechanical shim (MS) rod to obtain the criticality during normal operation. A further analysis is performed to investigate the local power peaking of the CSBA-loaded FA at MS-rodded condition. Moreover, a simple $B_4C$-based control rod arrangement is proposed to assure a sufficient shutdown margin even at the cold-zero-power condition. All calculations in this neutronic-thermal hydraulic coupled investigation of the 3D SBF SMR core are completed by a two-step Monte Carlo-diffusion hybrid methodology.

• Advances in concrete construction
• /
• 제6권4호
• /
• pp.323-344
• /
• 2018

The study herein reports the impact of Steel Fiber (SF) and Ground Granulated Blast Furnaces slag (GGBFS) content on the fresh and hardened properties of fly ash (FA) based Self-Compacting Geopolymer Concrete (SCGC). Two series of self-compacting geopolymer concrete (SCGC) were formulated with a constant binder content of $450kg/m^3$ and at an alkaline-to-binder (a/b) ratio of 0.50. Fly ash (FA) was substituted with GGBFS with the replacement levels being 0%, 25%, 50%, 75%, and 100% by weight in each SCGC series. Steel fiber (SF) wasn't employed in the assembly of the initial concrete series whereas, within the second concrete series, an SF combination was achieved by a constant additional level of 1% by volume. Fresh properties of mixtures were through an experiment investigated in terms of slump flow diameter, T50 slump flow time, V-funnel flow time, and L-box height ratio. Moreover, the mechanical performance of the SCGCs was evaluated in terms of compressive strength, splitting tensile strength, and fracture toughness. Furthermore, a statistical analysis was applied in order to judge the importance of the experimental parameters, like GGBFS and SF contents. The experimental results indicated that the incorporation of SF had no vital impact on the fresh characteristics of the SCGC mixtures whereas GGBFS aggravated them. However, the incorporation of GGBFS was considerably improved the mechanical properties of SCGCs. Moreover, the incorporation of SF with the total different quantity of GGBFS replacement has considerably increased the mechanical properties of SCGCs, by close to (65%) for the splitting strength and (200%) for compressive strength.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2682-2695
• /
• 2021

This paper aims to evaluate the structural dynamic responses and damage/failure of the nuclear fuel reprocessing plant under the free drop impact of spent fuel cask (SFC) and fuel assembly (FA) during the on-site transportation. At the present Part I of this paper, the large-scale SFC model free drop test and the corresponding numerical simulations are performed. Firstly, a composite target which is composed of the protective structure, i.e., a thin RC plate (representing the inverted U-shaped slab in the loading shaft) and/or an autoclaved aerated concrete (AAC) blocks sacrificial layer, as well as a thick RC plate (representing the bottom slab in the loading shaft) is designed and fabricated. Then, based on the large dropping tower, the free drop test of large-scale SFC model with the mass of 3 t is carried out from the height of 7 m-11 m. It indicates that the bottom slab in the loading shaft could not resist the free drop impact of SFC. The composite protective structure can effectively reduce the damage and vibrations of the bottom slab, and the inverted U-shaped slab could relieve the damage of the AAC blocks layer dramatically. Furthermore, based on the finite element (FE) program LS-DYNA, the corresponding refined numerical simulations are performed. By comparing the experimental and numerical damage and vibration accelerations of the composite structures, the present adopted numerical algorithms, constitutive models and parameters are validated, which will be applied in the further assessment of drop impact effects of full-scale SFC and FA on prototype nuclear fuel reprocessing plant in the next Part II of this paper.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.679-683
• /
• 2006

A feeding trial was conducted with 10 sheep for 12 weeks to examine the effect of soybean oil (SBO) supplementation on long-chain fatty acids composition, especially cis9,trans11-conjugated linoleic acid (c9,t11-CLA) in fat tissues. Sheep were fed either a SBO supplemented diet (5%, DM basis) or a control diet without SBO. Chopped rye grass hay was fed as roughage. Concomitant increases in contents of total cholesterol (T-C) and HDL-cholesterol (HDL-C) in the plasma of sheep were observed from the SBO supplementation. The supplementation of SBO reduced (p<0.05) the proportions of $C_{16:1}$, $C_{17:0}$ and $C_{17:1}$ but increased (p<0.05) the proportions of $C_{18:0}$ and octadecenoic acid (t11-$C_{18:1}$) in the intramuscular fat. The $C_{18:0}$ proportion only in the subcutaneous fat was increased (p<0.05) by the SBO supplementation. The SBO supplementation slightly increased CLA proportion in the intramuscular fat and subcutaneous fat.