• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.61-66
• /
• 2010

In this paper we evaluated small field dose characteristics of exclusive cone fields versus square fields for stereotactic radiosugery (SRS) which is based on linear accelerators (LINAC). For this test, we used a small beam detector (stereotactic fields detector : SFD) with a 6 MV photon beam and a water phantom system (IBA, Germany). Percentage depth dose (PDD) was measured for different field sets (cones : ${\Phi}1\;cm$, ${\Phi}2\;cm$, ${\Phi}3\;cm$ ; square fields : $1{\times}1\;cm^2$, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$) at a source skin distance (SSD) of 100 cm. We measured the point depths at 1.5 cm, 5 cm, 10 cm, 20 cm, and 30 cm. The output factors were measured under the same geometrical conditions of the PDD and normalized at the maximum dose depth. To analyze the penumbra, we measured the dose profile with 95 cm of SSD, 5 cm of depth for each field sizes (${\Phi}1\;cm$, ${\Phi}3\;cm$, $1{\times}1\;cm^2$, and $3{\times}3\;cm^2$) using SFD. We obtained the values for every 1 mm interval in the physical field (90%) and 0.5 mm interval in the penumbra region (20 to 80%). The PDD variation of exclusive cones and square fields were 4.3 to 7.9% lesser than the standard field size ($10{\times}10\;cm^2$. The variation of PDD was reduced while the field size was increased. To compare the beam quality, we analyzed the $PDD_{20,10}$ and the results showed under the 1% of variations for all experiments except for ${\Phi}1\;cm$ cone and $1{\times}1\;cm^2$ fields. Output factors of exclusive cone were increased 3.1~4.6% than the square fields, and the penumbra region of exclusive cone was reduced 20% as compared to the square fields. As the previous researches report, it is very important for SRS and SFD that precise dosimetry in small beam fields. In this paper, we showed the effectiveness of exclusive cone, compared to square field. And we will study on the various detector characteristics for small beam fields.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.283-293
• /
• 2003

Domestic water treatment plants operate the rapid and slow filtering system using the filtering sands. Most of them are composed of beach sands, which have less sorption capacity of heavy metals as well as organic contaminants. Therefore, the development of fortified functional filtering materials with high removal capacity of organic and inorganic contaminants is needed to prevent the unexpected load of contaminated source water. This study aims to test the hydrochemical change and the removing capacity of heavy metals such as Cd, Cu, and Pb on the Jumunjin sand, feldspathic sand(weathering product of Jecheon granite), feldspathic mixing sand I(feldspathic sand mixed with 10 wt% zeolite), and feldspathic mixing sand II (feldspathic sand mixed with 20 wt% zeolite). Feldspathic mixing sand I and II showed the eruption of higher amounts of cations and anions compared with the Jumunjin sand and feldspathic sand. They also showed higher eruption of Si, Ca, $SO_4$ ions than that of Al, $NO_3$, Fe, K, Mg, and P. Feldspathic mixing sand II caused higher eruption of some cations of Na, Ca, Al than feldspathic mixing sud I, which is the result controlled by the dissolution of zeolite. Jumunjin sand and feldspathic sand showed very weak sorption of Cd, Cu and Pb. In contrast to this, feldspathic mixing sand I and II showed the high sorption and removal capacity of the increasing order of Cd, Cu and Pb. Feldspathic mixing sand II including 20% zeolite showed a fortified removal capacity of some heavy metals. Therefore, feldspathic mixing sand mixed with some contents of zeolite could be used as the fortified filtering materials for the water filtering and purification in the domestic water treatment plants.

• Journal of Animal Science and Technology
• /
• v.53 no.5
• /
• pp.419-428
• /
• 2011

This study was conducted to test the efficacy of Ulva pertusa kjellman as immunomodulators under lipopolysaccharide (LPS) challenge in broilers by investigating their effects on serum superoxide dismutase (SOD) like ability, immunoglobulin concentration, and splenic cytokine mRNA expression. A total of ninety six1-d-old male broiler chicks (Ross 308) were divided into 4 treatment groups with 8 replicates of 3 birds in each group. NC (negative control, no immune substances), PC (positive control, ${\beta}$-glucan 25 ppm), Ulva P (Ulva pertusa kjellman Powder 3%), and Ulva E (Extract form Ulva pertusa kjellman 0.3%) were added in feed with respective substance. Heparinized venous blood and spleens were collected from five birds per dietary treatment at 5 wk of age. The SOD like activities in Ulva P and Ulva E were significantly increased in comparison with other groups (P<0.05). The immunoglobulin M content was lower in the Ulva E than other groups (P<0.05). Expression patterns of splenic cytokine mRNA in the IL-$1{\beeta}$, IL-2 and IL-6 were similar. Expression rate of IL-$1{\beta}$, IL-2 and IL-6 in Ulva pertusa kjellman (Ulva P, Ulva E) were decreased (P<0.05) in comparison to other groups. Expression rate of IL-$1{\beta}$, IL-2 and IL-6 were significantly lower in groups treated with Ulva E than Ulva P. In conclusion, dietary supplementation of Ulva pertusa kjellman improved SOD like activity and affect immune system by inhibiting inflammatory response in broiler chicks. In addition, it is more effective to use Ulva pertusa kjellman extract than powder for immunomodulatory function. These results suggest the possibility that Ulva pertusa kjellman could be used as the immunomodulator for inflammatory response in broiler chicks.

• Development and Reproduction
• /
• v.11 no.3
• /
• pp.245-251
• /
• 2007

Vinclozolin(VCZ), a systemic dicarboximide fungicide, has been used in the control of diseases caused by microorganism of some species in fruits, vegatables and ornamental plants. Although VCZ itself is a very weak antagonist for androgen receptor binding, both melabolites M1 and M2 are effective antagonists. The present study was undertaken to examine whether prepubertal exposure to VCZ affects on the onset of puberty and the associated reproductive parameters such as hormone receptor expressions in female rats. VCZ(10 mg/kg/day) was administered daily from postnatal day 21(PND 21) through the day when the first vaginal opening(V.O.) was observed. Gross anatomy and weight of reproductive tissues were compared to test the VCZ's effects on the cell proliferation. Furthermore, histological studies were performed to assess the structural alterations in the tissues. To determine the transcriptional changes in progesterone receptor(PR), total RNAs were extracted and applied to the semi-quantitative reverse transcription polymerase chain reaction(RT-PCR). As a result, delayed V.O. was shown in the VCZ group(PND $34.00{\pm}1.22$) compared to the control group(PND $38.20{\pm}1.92$; p<0.01). VCZ treatment significantly decreased the wet weight of ovaries and uteri compared to the control group(p<0.01). Graafian follicles and corpora lutea were observed only in the ovaries from the control animals, while numerous primary, secondary follicles and small atretic follicles were observed in the ovaries from VCZ group. Similarly, hypotrophy of luminal and glandular uterine epithelium was found in the VCZ group. In the semi-quantitative RT-PCR studies, the transcriptional activity of PR in ovary(p<0.01) from VCZ group were significantly lower than those from the control group while in uterus were similar compared with the control group. The present studies demonstrated that the acute exposure to VCZ during the critical period of prepubertal stage could inactivate the reproductive system resulting delayed puberty in female rats.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.119-128
• /
• 2017

BACKGROUND: Miscellaneous cereal have been largely consumed in Korea as due to their physiological functions beneficial to human health. The cereals are currently a social concern because they have been found to contain heavy metals. Thus, monitoring heavy metals in the cereals is an important requirement for food safety analysis. In this study, we determined arsenic concentration in the cereals randomly harvested from different markets. METHODS AND RESULTS: Inorganic arsenic was determined by ICP-MS coupled with HPLC system. The HPLC-ICP-MS analysis was optimized based on the limit of detection and recover test to reach $0.13-1.24{\mu}g/kg$ and 94.3-102.1%, respectively. The concentrations of inorganic arsenic equivalent to daily exposure were levels of $19.91{\mu}g/day$ in mixed grain, $1.07{\mu}g/day$ in glutinous rice, $0.77{\mu}g/day$ in black brown rice, $0.13{\mu}g/day$ in barley and $0.11{\mu}g/day$ in soybeans. CONCLUSION: The levels of arsenic in miscellaneous cereals were found lower than the recommended The Joint FAO/WHO Expert Committee on Food Additives (JECFA) levels, suggesting that the cereals marketed in Korea are not potential concern in risk assessment.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.12a
• /
• pp.29-34
• /
• 2000

산업 발달에 따라 날로 많은 식품들이 새롭게 개발되어지고 있다. 또한 이와 병행해서 식품으로 인한 알레르기 발생 빈도도 날로 증가하고 있으며 그 증상 또한 점차 심화되고 있는 것이 세계적인 추세이다. 우리나라도 예외는 아니어서 일반 알레르기 환자뿐 아니라 식품으로 인한 알레르기 환자들이 점차 증가됨이 보고되어지고 있다. 농산물 시장의 수입개방이후 우리나라에는 많은 해외 농산물이 수입되어지고 있으며 그 중 작년 한해의 경우 총 수입 농산물의 10%를 넘는 유전자 재조합 농산물이 우리나라에 수입되어진 것으로 통계 보고되어졌다. 이러한 관점에서 알레르기 환자의 증가와 새로운 식품 (특히 유전자 재조합 식품)의 증가에는 서로 관련성이 있을 것으로 추측되어지고 있어 (새로운) 식품에 대한 알레르기성의 예측과 관리가 필요한 실정이다. 이에 몇몇 발표된 유전자 재조합 식품에 관련된 알레르기성 검사 논문들과 실험실에서 이루어진 연구 결과들을 중심으로 유전자 재조합 식품의 알레르기 위험성에 대해 알아보고자 한다. 일반적으로 식품의 단백질이 알레르겐(allergen)으로 작용하기 위해서는 먼저 소화효소에 의해 분해되어지고 장에서 흡수되어져서 immunopotent cell에 의해 process 되어 immune system에 present 되어져야 한다. 따라서 단백질로 인한 알레르기 반응은 그 단백질의 자연적 형태 뿐만이 아니라 소화 효소에 분해된 단편들의 구조 또는 다른 알레르겐 단백질과의 유사 구조로 인한 교차 반응에 의해 발생함을 기억해야 한다. 식품 단백질 중 어떤 단백질이 알레르겐으로 작용하는가에 대한 특이성 조사에 많은 관심이 집중되어지고 있지만 아직까지는 대략 다섯 개 정도의 일반적인 특성으로서 요약되어질 수 있다. 그러나 이러한 대략의 특성에 적용되지 않는 식품 알레르겐도 많음을 잊어서는 안 될 것이다. 알레르겐으로 작용하는 식품 단백질의 일반적 특성 1. 좋은 수용성 2. 식품내에 많은 부분을 차지하는 주 단백질이 주 알레르겐으로 작용 3. 단백질내에 하나 이상의 IgE-binding site 존재 4. 위장액에 대한 저항성 5. 10～70 kDa 크기 유전자 재조합 기술이란 말 그대로 유전자를 인위적으로 새롭게 조합하는 기술로 이전의 기술로는 불가능했던 유전적 변형을 농작물과 동물에 가능하게 했으며 이로 인해 유전적으로 변형된 식용 동식물의 개발이 가능하게 되었다. 새로운 유전인자를 개체에 삽입함으로 새로운 단백질이 발현 될수 있고 그로 인해 1) 해충과 질병에 대한 저항성 증가, 2) 화학 제초제에 대한 새로운 저항성 부여, 3) 식품의 저장성 향상, 4) 식품의 영향적 보충/향상 등의 이점을 얻을 수 있다 (표 1). 세계적으로 유전자 재조합 된 새로운 농산물의 재배는 날로 증가추세에 있으며 그 중에서 가장 많은 부분을 차지하는 농산물로 soybean을 들 수 있으며 (표 2) soybean을 중심으로 그 알레르기성의 변화가 연구 조사된 몇 가지 예를 살펴보고자 한다. (표 3)에 요약된 soybean중 첫 번째 경우는 재초제에 대한 저항성을 높여주기 위해 Agrobacterium에 존재하는 EPSPS라는 단백질을 콩에서 발현하도록 찬 유전자 재조합 된 콩의 경우이다. 이 콩의 경우에는 첫째. 이전된 새로운 단백질 EPSPS가 다른 여러 식물에 이미 존재하고 있는 단백질로서 우리가 이미 이러한 식품을 섭취할 때 이 단백질도 같이 섭취해오고 있었다는 점, 둘째. 이 단백질이 소화액 분해 실험에서 짧은 시간내에 분해가 되었다는 점, 셋째. 재조합 된 콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한 콩으로 결론짓고 있다. 영양성을 높이기 위해 Brazil nut에서 methionine 함량이 풍부한 2s albumine을 콩에서 발현하도록 한 두 번째 유전자 재조합 콩의 경우 이전된 단백질 때문에 Brazil nut에 알레르기 반응을 일으키는 알레르기 환자들을 조사한 결과 역시 재조합 된 콩에도 알레르기 반응을 일으켰다는 보고이다. Brazil nut에서 콩으로 이전된 단백질이 Brazil nut에서의 알레르기성을 그대로 유지한 점을 볼 때 새로운 단백질이 어디에서 유래하는가가 중요함을 잘 보여준 연구이다 세 번째 콩의 경우 역시 영양성을 높여주기 위해 corn에서 10 kDa과 HSZ 단백질을 콩에서 발현하도록 유전자 재조합했는데 이 콩의 경우는 알레르기 환자들이 유전자 재조합 된 콩과 자연 콩에 반응의 차이를 나타내지 않았다는 결과 보고이다. 위의 세 실험 결과들을 종합해 볼 때 무엇보다도 새롭게 발현된 단백질이 원래 어떤 성질을 갖고 있으며 어디에서 유래했는지가 알레르기성 조사에 중요한 역할을 한다 할 수 있겠다. 또한 유전자 재조합된 식품들은 알레르기 환자들을 위해 표기되어져야 할 것인데 이를 위한 알레르기성 검사 실험은 공공단체를 통해 이루어져야 할 것이며 환자들마다 알레르겐으로 작용하는 단백질의 인식부위(epitope)가 다를 수 있기 때문에 적어도 10명 이상의 알레르기 환자들이 조사되어져서 검사가 이루어져야 할 것이다. 환자들의 혈청을 통한 in vitro 실험에서는 ELISA, RAST, immunoblotting과 같은 검사 방법들이 적용될 수 있고, 그 결과가 음성인 경우에 그 다음 단계로 in vivo 실험에서는 직접 환자의 피부반응검사 (skin prick test)나 DBPCFC (double-blind placebo-controlled food challenge) 검사 방법을 통해 확인되어져서 이 모든 경우가 음성인 경우와 하나라도 양성인 경우를 구별하여 식품에 표기함으로 알레르기 환자들의 유전자 재조합 식품에 대한 안전성이 보장되어져야 할 것이다.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.130-137
• /
• 2007

This in vitro study examined the effect of surface defects on cutting blades on the extent of the cyclic fatigue fracture of HEROShaper Ni-Ti rotary files using fractographic analysis of the fractured surfaces. A total of 45 HEROShaper (MicroMega) Ni-Ti rotary flies with a #30/.04 taper were divided into three groups of 15 each. Group 1 contained new HEROShapers without any surface defects. Group 2 contained HEROShapers with manufacturing defects such as metal rollover and machining marks. Croup 3 contained HEROShapers that had been clinically used for the canal preparation of 4-6 molars A fatigue-testing device was designed to allow cyclic tension and compressive stress on the tip of the instrument whilst maintaining similar conditions to those experienced in a clinic. The level of fatigue fracture time was measured using a computer connected the system. Statistical analysis was performed using a Tukey's test. Scanning electron microscopy (SEM) was used for fractographic analysis of the fractured surfaces. The fatigue fracture time between groups 1 and 2, and between groups 1 and 3 was significantly different (p<0.05) but there was no significant difference between groups 2 and 3 (p>0.05). A low magnification SEM views show brittle fracture as the main initial failure mode At higher magnification, the brittle fracture region showed clusters of fatigue striations and a large number of secondary cracks. These fractures typically led to a central region of catastrophic ductile failure. Qualitatively, the ductile fracture region was characterized by the formation of microvoids and dimpling. The fractured surfaces of the HEROShapers in groups 2 and 3 were always associated with pre-existing surface defects. Typically, the fractured surface in the brittle fracture region showed evidence of cleavage (transgranular) facets across the grains, as well as intergranular facets along the grain boundaries. These results show that surface defects on cutting blades of Ni-Ti rotary files might be the preferred sites for the origin of fatigue fracture under experimental conditions. Furthermore this work demonstrates the utility of fractography in evaluating the failure of Ni-Ti rotary flies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.233-240
• /
• 2017

This experiment was conducted to establish a cultivation system for sorghum in reclaimed soils. Pot experiments were used to test the effects on seedling establishment of sowing depth, soil water content, and soil salinity using seeds of Nampungchal-susu and Hwanggeumchal-susu in reclaimed soil. Field experiments were also conducted to examine differences in growth characteristics and yield production, by sowing time, and planting distance. The result of the pot experiment, examining seedling establishment at various sowing depths revealed that, it was the highest 76.7% when the seeds were sown at a depth of 3 cm. Seedling establishment did not differ with soil water content between 10~30 kpa and at 51~70 kpa. No effects of seed moisture absorption before sowing were observed. Seedling establishment showed no differences with soil salinity below $3.2\;dS\;m^{-1}$, but decreased with Salinity above $4.8\;dS\;m^{-1}$. In field experiments to assess the effects on seedling establishment ratio of sowing time, Nampungchal-susu was revealed to have a high seedling establishment ratio following sowing on June 15. Hwanggeumchal-susu did not exhibits effects of sowing time, on seedling establishment ratio but exhibited higher seedling establishment when in low soil salinity conditions than when sown in high soil salinity conditions. With respect to yield, the yield of the seeds sown on June 15 was higher by 13% for Nampungchal-susu and by 29% for the Hwanggeumchal-susu than that those sown on June 25. With respect to soil salinity, the yield at a soil salinity of $3.2dS\;m^{-1}$ was lower by 23% than that at $1.6dS\;m^{-1}$ or lower for Nampungchal-susu, and was lower by 30% Hwanggeumchal-susu. With respect to planting density, both breeds showed the highest yield at $60{\times}10cm$. These results suggest that a sowing time of June 15 and a seeding distance of $60{\times}10cm$ are appropriate for sorghum in reclaimed land.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.263-270
• /
• 2010

This is a research on development of water purification equipment called artificial floating island (=AFI) for the stagnant water area which can secure exuberant landscape and water-friendility. The equipment devised in this study is designed to make up the weakness of conventional AFIs and improves the removal efficiency of pollutants using the mixture of media and plants. The air compressor positioned at the inlet releases air with inflow continuously, the water pump at the outlet sprays as a form of fountain with causing a disturbance on stable water column, then, both of them contribute improvement of water quality over a large area. We applied Bio-stone as a media in this system and performed an experiment of pre-efficiency test, and we concluded that the higher pollutants concentration of inflow, the higher removal efficiency we obtained. At the result of lab-scale experiment, in the case of high-concentration inflow, in the removal efficiency of SS is 62.2%, BOD is 50.2%, COD is 55.1%, T-N is 31.6%, T-P is 38.4%. In addition, to evaluate the field application, we set up the facilities in Sin-gal lake located in Yongin-Si Gyeonggi-Do, and researched on the removal efficiency of outflow relative to the inflow. As a result, SS is 53.5%, BOD is 32.8%, COD is 36.9%, T-N is 22.6%, T-N is 33.2%.