• 한국해양공학회지
• /
• 제29권2호
• /
• pp.143-153
• /
• 2015

This paper presents the results of an experimental study on the motion of an FPSO (Floating production storage and off-loading) and the characteristics of the mooring systejavascript:confirm_mark('abe', '1');m according to the turret position. Model tests of a turret-moored FPSO were carried out in the Ocean Engineering basin of KRISO. The FPSO was moored using an internal turret and catenary mooring. The models (1/60 scale) that were prepared included the FPSO, turret, and mooring lines. The experiments were conducted in irregular waves and combined environments, with waves, currents, and winds. A time-domain simulation was performed using OrcaFlex. The motion response and mooring line tension from the present calculations were compared with the results of experiments, and the agreement was fairly good. In addition, the results showed that the weathervaning stability was improved when the position of the turret was moved in the bow direction.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.394-405
• /
• 2020

To assess the station-keeping performance of floating structures in the Arctic region, the ice load should be considered along with other environmental loads induced by waves, wind, and currents. However, present methods for performance evaluation in the time domain are not effective in terms of time and cost. An ice load generation module is proposed based on the experimental data measured at the KRISO ice model basin. The developed module was applied to a time domain simulation. Using the results of a captive model test conducted in multiple directions, the statistical characteristics of ice loads were analyzed and processed so that an ice load corresponding to an arbitrary angle of the structure could be generated. The developed module is connected to commercial dynamic analysis software (OrcaFlex) as an external force input. Station-keeping simulation in the time domain was conducted for the same floating structure used in the model test. The mooring system was modeled and included to reflect the designed operation scenario. Simulation results show the effectiveness of the proposed ice generation module and its application to station-keeping performance evaluation. Considering the generated ice load, the designed structure can maintain a heading angle relative to ice up to 4°. Station-keeping performance is enhanced as the heading angle conforms to the drift direction. It is expected that the developed module will be used as a platform to verify station-keeping algorithms for Arctic floating structures with a dynamic positioning system.

• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.173-193
• /
• 2023

Reliable prediction of the motion of FOWT (floating offshore wind turbine) and associated mooring line tension is important in both design and operation/monitoring processes. In the present study, a 5MW OC4 semisubmersible wind turbine is numerically modeled, simulated, and analyzed by the open-source numerical tool, OpenFAST and in-house numerical tool, Charm3D-FAST. Another commercial-level program FASTv8-OrcaFlex is also introduced for comparison for selected cases. The three simulation programs solve the same turbine-floater-mooring coupled dynamics in time domain while there exist minor differences in the details of the program. Both the motions and mooring-line tensions are calculated and compared with the DeepCWind 1/50 scale model-testing results. The system identification between the numerical and physical models is checked through the static-offset test and free-decay test. Then the system motions and mooring tensions are systematically compared among the simulated results and measured values. Reasonably good agreements between the simulation and measurement are demonstrated for (i) white-noise random waves, (ii) typical random waves, and (iii) typical random waves with steady wind. Based on the comparison between numerical results and experimental data, the relative importance and role of the differences in the numerical methodologies of those three programs can be observed and interpreted. These comparative-study results may provide a certain confidence level and some insight of potential variability in motion and tension predictions for future FOWT designs and applications.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• 한국의상디자인학회지
• /
• 제4권3호
• /
• pp.9-15
• /
• 2002

Compared with synthetic dyes, natural dyes have inferior colorfastness as a result of the exposure of the material to any environment that may be encountered during the processing, testing, storage, display or use of the dyed materials. Especially, colors on fabrics fade excessively after washing. Therefore, it is problem to infer the historic textiles with natural-dyed fabrics. The object of this study is to analyse the factors affected to colorfastness and color change during washing. In experimental, fifteen natural dyes were dyed by the Korean traditional dyeing methods onto natural fiber fabrics: cotton, silk, ramie, and flex. Total 49 dyed fabrics in combination with dyes and fibers were used for the specimen. The Launder-Ometer was used for evaluating the effects of exposure to repetitive washing from 1 to 20 washing cycles (KS K 0430). Color difference(ΔE) in the CIEL＊A＊B＊ color-order system were determined by spectrophotometer at 100 bserver. Washing caused significant changes in the color of natural-dyed fabrics. The degree and nature of color changes on the fabrics were dependent on the combination of fiber and the dye type used. The groups of violet(Lithospermum erythrorhizon Sieb.et Zucc) and black color(Ailanthus altissima Swingle, Phus trichocarpa Miq) yielded excellent colorfastness to repetitive washing. The group of indigo blue color(Polygonum tinctorium Lour.) was also very resistant to color change in washing except silk. Whereas the dye groups of Red, Yellow, Orange, Brown colors indicated greatest changes in color, particularly Carthamus tinctorius L.

• 한국의상디자인학회지
• /
• 제6권3호
• /
• pp.45-53
• /
• 2004

Natural dyes have poor colorfastness as a result of the exposure of the dyed fabric to sunlight encountered during the display or wearing. As colors on fabrics fade excessively under sunlight, it is a problem to infer and restore the historic textiles with natural-dyed fabrics to original colors. The object of this study is to analyse the factors affected to color change under light. In experimental, fifteen natural dyes were dyed by the Korean traditional dyeing methods onto natural fiber fabrics: cotton, silk, ramie, and flex. Total 49 dyed fabrics in combination with dyes and fibers were used for the specimen. The Weather-O-meter was used for evaluating the effects of exposure to light for 2.5 to 450 hours. The process of color changes in the CIEL *A*B* color-order system to the exposure time were determined by spectrophotometer at 10$^{\circ}$ observer. Sunlight exposure caused significant changes in the color of natural-dyed fabrics. The degree and nature of color changes on the fabrics were dependent on the combination of fiber and the type of dye used. The groups of violet(Lithospermum erythrorhizon Sieb.et Zucc.) and black color(Ailanthus altissima Swingle, Phus trichocarpa Miq) yielded excellent colorfastness to light. The group of indigo blue color(Polygonum tinctorium Lour.) was also very resistant to fading in both exposure except silk. Whereas the dye groups of Red, Yellow, Orange, Brown colors indicated greatest changes in fading, particularly Carthamus tinctorius L.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.736-741
• /
• 2017

본 논문은 회전익 항공기의 와이퍼 시스템의 설계 개선에 관한 연구이다. 국내 회전익 항공기의 우천환경 운용 시, 와이퍼 닦임 성능 저하 및 떨림 현상이 발생하였다. 와이퍼 시스템은 크게 와이퍼 암 조립체, 전동기, 와이퍼 변환기 조립체, 플랙스 드라이브로 구성되며, 와이퍼 시스템에 문제가 발생하면 우천환경의 작전에 제한사항이 발생하여 작전능력이 감소한다. 이러한 와이퍼 시스템의 문제를 야기한 원인은 크게 2가지로 검토되었으며, 첫번째 사유는 항공기 기동조건에서 와이퍼 암에 작용하는 부상력 때문이며, 두번째는 구성품들의 과다한 유격 때문이다. 이 2가지 문제를 개선하기 위해서 본 연구가 수행되었으며, 4가지의 와이퍼 구성품 중 와이퍼 암을 개선하였다. 개선 내용으로는 와이퍼 암의 누름압(스프링 장력) 증가, 기어 공차 개선, 재질 및 형상 변경이 수행되었다. 개선형상의 검증은 구성품 단위 내구성 시험, 항공기 지상 시험, 비행 시험이 수행되었으며, 설계 개선된 와이퍼 암을 장착하였을 시 닦임 성능 및 유격문제가 해소된 것을 확인 할 수 있었다. 닦임성능은 육안으로 확인하였으며, 유격문제는 와이퍼 작동거리를 측정하여 확인하였다. 현재 국내 회전익 항공기는 개선 형상을 적용하여 문제없이 운용하고 있으며, 이러한 설계 개선 과정은 향후 회전익 항공기 개발 시 유용한 참고자료가 될 것이다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.123-133
• /
• 2014

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of improving the lubricating system to lubricate cylinder parts optimally by an electronically controlled quill device according to changes of engine load and revolution speed. In order to apply the developed accumulating distributor to an integrated cylinder lubricator by the electronically controlled system as the third research stage, the lubricating system is improved in the electronically controlled quill device with a solenoid valve. In this study, the effects of lubricator revolution speed, driving pressure(or plunger stroke) and cylinder back pressure on oil feed rate and lubrication inequality rate are investigated by using the integrated cylinder lubricator system with an accumulated distribution by the electronic control(I.C.S.), and the oil feed rate and lubrication inequality rate of I.C.S. are compared with those of the motor-driven cylinder lubricator by the electronically controlled quill system equipped with an accumulating distributor(E.D.S.). It is found that the oil feed rate of I.C.S. is smaller than that of E.D.S. due to the reduction of delivery velocity by the higher delivery pressure, and the variances of lubrication inequality rate for I.C.S. have become smaller than those of E.D.S. as the driving pressure in all experimental conditions increases, except for the driving pressure of 26 bar(plunger stroke 2 mm) at the cylinder lubricator speed of 120 rpm.

• 대한의용생체공학회:의공학회지
• /
• 제37권6호
• /
• pp.215-221
• /
• 2016

Conformity between the femoral component and tibial insert within the knee replacement may be measured in frontal or sagittal view, and shows differences in the curvature radius of the femoral component depending on the flexion angle, i.e., curvature radius has a complex effect on contact stress. Therefore, it is essential to confirm how the curvature radius effects contact stress, and provide an important variable to reduce contact stress. This study correlated contact stress with curvature radius measured in frontal and the sagittal views and confirmed the effect of curvature radius for assessment of the Newly Designed Unicompartment Knee Replacement (NDUKR). Finite element models were constructed for NDUKR and $Zimmer^{(R)}$ Unicompartment High Flex Knee Replacement system (ZUKR), incorporating the curvature radius as measured in either frontal or sagittal view. The femoral component had 1200N of compressive load applied approximately 1.65xbody weight. Contact stress was predicted at flexion angles $0^{\circ}C$, $30^{\circ}C$, $60^{\circ}C$, $90^{\circ}C$ and $120^{\circ}C$, for NDUKR: 42, 47.7, 47.7, 51.2, and 54.1 MPa, and ZUKR: 41.2, 49.5, 53.2, 54.3, and 57.4 MPa, respectively. Correlation analysis showed the influence of curvature radius measured from the sagittal view was larger than for frontal view.