• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.579-582
• /
• 2002

For train service, safety and reliability is an inevitable performance. Specially, turn-out system of the railway for safety because of actual part. Hence the management is strictly executed over turn-out systems of the railway. Also number of turn-out system need to monitoring systems. In this paper, the data multi-acquisition system for monitoring it is necessary to reduce the cost from the expensive characteristics of multi-monitoring system according to the importance of each data because this system is based on communication of one to several units. We designed the data multi-acquisition system using numbers of micro-controller and the experiment was executed to the actual turn-out system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.673-676
• /
• 2001

The photovoltaic power generation system has a great future as clean energy instead of fossil fuel, which has many environmental problems such as exhausted gas or air pollution. In a utility interactive photovoltaic generation system, a three phase inverter is used for the connection between the photovoltaic array and the utility. This paper presents a three phase inverter for photovoltaic power system with current controller, voltage controller, PLL control system and the phase detector of interactive voltage by using dq transformation. The proposed inverter system provides a sinusoidal ac current for domestic loads and the utility line with unity power factor.

• International Journal of Ocean System Engineering
• /
• 제2권4호
• /
• pp.223-232
• /
• 2012

For the accurate estimation of the position and orientation of a UUV (unmanned underwater vehicle), a low-cost AHRS (attitude heading reference system) was developed using a low-cost IMU (inertial measurement unit) sensor which provides information on the 3D acceleration, 3D turning rate and 3D earth-magnetic field data in the object coordinate system. The main hardware system is composed of an IMU sensor (ADIS16405) and TMS320F28335, which is coded with an extended kalman filter algorithm with a 50-Hz sampling frequency. Through an experimental gimbal device, good estimation performance for the pitch, roll, and yaw angles of the developed AHRS was verified by comparing to those of a commercial AHRS called the MTi system. The experimental results are here presented and analyzed.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.53-56
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• 산업공학
• /
• 제19권3호
• /
• pp.245-254
• /
• 2006

Equipments in container terminal have a lot of parts, and an equipment breakdown affects the productivity of terminal. In this paper, we develop a maintenance management system for improving reliability, availability and maintainability of equipments in container terminals. The developed system consists of five modules : equipment structure module, equipment operation management module, maintenance control module, spare part control module and data analysis module. The system supports reliability engineers to manage and improve RAM of equipments in container terminals. For example, FMEA, failure state analysis and life distribution parameters estimation are easily or automatically done by the system. This system also provides optimal preventive maintenance intervals by simulation and optimal yearly PM schedules for equipments in container terminal are recommended.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.147-160
• /
• 2013

System integration is an important element for the construction of naval combat ships. In particular, because impeccable combat system integration together with the sensors and weapons can ensure the combat capability and survivability of the ship, the integrated performance of the combat system should be verified and validated whether or not it fulfills the requirements of the end user. In order to conduct systematic verification and validation, a data analysis tool is requisite. This paper suggests the Data Extraction, Recording and Analysis Tool (DERAT) for the data analysis of the integrated performance of the combat system, including the functional definition, architecture and effectiveness of the DERAT by presenting the test results.

• KIEE International Transactions on Power Engineering
• /
• 제12A권1호
• /
• pp.20-25
• /
• 2002

This paper deals with the development of dynamic equivalents of the Korea Electric Corporation (KEPCO) systems. Several coherency identification methods are studied in order to find a proper method to well represent the dynamic characteristics of the KEPCO system. Also, this paper presents the comparison of the detail and classical aggregation methods in terms of the dynamic and static characteristics of the system. The nonlinear time simulation of the developed KEPCO equivalent system and the original system is performed to illustrate the validity of the equivalent system.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.316-331
• /
• 2019

A practical application of a supercapacitor energy storage system in a polarization instrument is proposed on the basis of the energy storage requirements of an induced polarization (IP) transmitter for geophysical exploration. We focused on the energy storage system of a supercapacitor, the topology of the power converter, and the system control strategy as key technologies, and we performed theoretical research and experimental tests on the system and developed an experimental platform. The experiments validated the theoretical research on the key technologies of the supercapacitor energy storage system and demonstrated the effectiveness of the innovation. Results showed that the storage system is efficient and satisfies the energy storage needs of the IP transmitter.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.387-395
• /
• 2020

Accuracy of an integrated Global Positioning System (GPS) / Inertial Navigation System (INS) relies heavily on the visibility of GPS satellites. Especially, its accuracy is dramatically degraded in urban canyon due to signal obstructions due to large structures. In this paper, we propose a new integrated positioning system that effectively combines INS, GPS, ultrasonic sensor, and barometer in GPS-denied environments. In the proposed system, the ultrasonic sensor provides velocity information along the forward direction of moving vehicle. The barometer output provides height information compensated for the pressure variation due to fast vehicle movements. To evaluate the performance of the proposed system, an experiment was carried out by mounting the proposed system on a test car. By the experiment result, it was confirmed that the proposed system bears good potential to maintain positioning accuracy in harsh urban environments.

• Smart Structures and Systems
• /
• 제29권6호
• /
• pp.791-797
• /
• 2022

A complex system is comprised of numerous entities containing physical components, devices and hardware, events or phenomena, and subsystems, there are intricate interactions among these entities. To reasonably identify the critical fault propagation paths, a system fault propagation model is essential based on the system failure mechanism and failure data. To establish an appropriate mathematical model for the complex system, these entities and their complicated relations must be represented objectively and reasonably based on the structure. Taking a command and control system as an example, this paper proposes a hierarchical fault propagation analysis method, analyzes and determines the edge betweenness ranking model and the importance degree of each sub-system.