• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2013

The present study proposed a methodology to analyze the networking efficiency of arterial road networks. The methodology was motivated to design three-dimensional networks and to analyze the networking ability quantitatively, which is a novel approach compared to existing methods depending on the two-dimensional network definition and the qualitative analysis for improving arterial road networks. The method considered the interdependence between high-level freeways and low-level highways, the ITS-based information for traffic and road conditions, and the physical networking. These three factors were quantified by a networking index (NI), and the networking efficiency was measured by a networking rate (NR). The present study proved that the networking efficiency (NR) was influenced by travel information sharing (i.e., ITS) and physical factors. This supports the fact that the integrated improvements of physical and ITS factors are necessary for an arterial road. The proposed method was applied for an actual arterial road network. It was found that the nation-wide NR was higher than that for the metropolitan area, which might be due to the difficulty in switching between high- and low-level networks and the lack of ITS functions in the metropolitan area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.91-91
• /
• 2013

Imagine a world where we could biomanufacture hybrid nanomaterials having atomic-scale resolution over functionality and architecture. Toward this vision, a fundamental challenge in materials science is how to design and synthesize protein-like material that can be fully self-assembled and exhibit information-specific process. In an ongoing effort to extend the fundamental understanding of protein structure to non-natural systems, we have designed a class of short peptides to fold like proteins and assemble into defined nanostructures. In this talk, I will talk about new strategies to drive the self-assembled structures designing sequence of peptide. I will also discuss about the specific interaction between proteins and inorganics that can be used for the development of new hybrid solar energy devices. Splitting water into hydrogen and oxygen is one of the promising pathways for solar to energy convertsion and storage system. The oxygen evolution reaction (OER) has been regarded as a major bottleneck in the overall water splitting process due to the slow transfer rate of four electrons and the high activation energy barrier for O-O bond formation. In nature, there is a water oxidation complex (WOC) in photosystem II (PSII) comprised of the earthabundant elements Mn and Ca. The WOC in photosystem II, in the form of a cubical CaMn4O5 cluster, efficiently catalyzes water oxidation under neutral conditions with extremely low overpotential (~160 mV) and a high TOF number. The cluster is stabilized by a surrounding redox-active peptide ligand, and undergo successive changes in oxidation state by PCET (proton-coupled electron transfer) reaction with the peptide ligand. It is fundamental challenge to achieve a level of structural complexity and functionality that rivals that seen in the cubane Mn4CaO5 cluster and surrounding peptide in nature. In this presentation, I will present a new strategy to mimic the natural photosystem. The approach is based on the atomically defined assembly based on the short redox-active peptide sequences. Additionally, I will show a newly identified manganese based compound that is very close to manganese clusters in photosystem II.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.175-179
• /
• 1997

bliniaturization oi microwave circuit components is an important issue with the development in the mobile communication. Capacitors, inductors anti hybrid devices of these are building blocks of electric circuits, and the fabrication of these devices using thin film technology will influence on the miniaturization of electronic devices In this paper, we report the successful fabrication of the inductors, capacitors and LC hybrid devices using a ferroelectric and a ferromagnetic oxide thin iilm. Au, stable at high temperatures in oxidizing ambient, is patterned by lift-off process, and oxide thin films are deposited by ion beam sputtering and chemical vapor deposition. These devices are characterized by a network analyzer in 0.5-15GtIz range We got the inductance of 5nH, capacitance oi 10, 000 pF and resonant frequencies of $10^{6}-10^{9}Hz$.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.1-24
• /
• 2007

With the development of information technology (IT), various information systems (IS) such as Web-based systems and mobile systems have appeared utilizing different technologies. However, recent studies on IS use and user satisfaction rarely account for technological differences among IS and environmental characteristics where IS are intended to be used. The purpose of this research is to investigate the determinants of the use of Web-based ticketing systems for cultural activities and to empirically validate their relationships. Environmental psychology suggests that human beings respond to external stimuli from environments with their emotions, and their emotional states influence human actions, e.g., IS use in this research. Applying environmental psychology to the use of Web-based systems in the culture and entertainment industry, we propose that web site characteristics first influence a user's internal state of mind (i.e., flow) and then the flow state influences the IS use. Studies related to the state of flow collectively affirm the key role played by the flow construct in shaping individual attitudes and behaviors toward IS. Users' flow states are captured by their shopping enjoyment, perceived behavioral control, and the level of concentration on the IS use. Referring to social presence theory, we have included such web site characteristics as content quality, context of web site, and community quality. In our research model, a second order construct is utilized to represent web site quality, because flow theory suggests that holistic experiences with web-based systems (rather than individual characteristics of the web site) are important in explaining the IS use. Further, we have included trust as another important factor influencing the IS use since business transactions on the web encompass higher uncertainty comparing to offline transactions. In order to test our hypotheses, we have conducted an online survey which results in 1,141 valid responses in the final sample. The data were collected from respondents who have experiences in Internet ticketing systems. Although it was a convenient sample, the sample represents a wide variety of user demographics. Validity and reliability of the research instrument were tested and research hypotheses were examined using PLS Graph 3.0. The results indicate that web site characteristics significantly influence the level of user concentration, user's enjoyment in shopping, and perceived behavioral control. Further, the use of Internet ticketing systems is influenced by users' flow states and trust in the web channel. User satisfaction is turned out to be affected by the use of Internet ticketing systems. Unlike extant research on the relationship between web site characteristics and its use, our study has found that, in the culture and entertainment industry, the impact of web site characteristics on IS use is mediated by a user's flow state. This finding has a practical implication that web site design should include as many features that enhance shopping enjoyment and concentration. Other practical implications of these findings and future research implications are also discussed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.15-21
• /
• 2004

It is possible to detect flaws in pipelines without interruption using all EMAT transducer because it is a non-contact transducer which can transmit ultrasonic waves into specimens without couplant. And it ran easily generate guided waves desired in each specific problem by altering the design of coil and magnet. In the present work, EMAT systems have been fabricated to generate surface waves, and selectively the plate wave of $A_1\;or\;S_1$ mode. The surface wave of 1.5MHz showed a good signal-to-noise ratio without distortion in its propagation along a pipeline, while the $S_1$ mode of 800kHz and the $A_1$ mode of 940kHz were distorted according to their dispersive properties. The wider the excitation pulse becomes, the better the mode selectivity of the plate waves becomes. A pipe of 256mm inner diameter and 5.5m thickness with 5 flaws was used for comparing the flaw detectability among the modes under consideration.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.37-52
• /
• 2006

A mobile device like ceil phone is the necessity of modern people, of ich con be easily connected to a wireless internet through such a mobile device. The demand for a wireless data communication is growing rapidly. However, agencies have not yet completed standardization of a markup language. Due to the development of the Mobile Device, agencies in this field have provided different data formats with each Mobile Device Platform. Traditionally, contents is hand-tailored to suit the target device. A key problem is that the characteristics and capabilities of the mobile device are too diverse to service the most suitable mobile contents. Because of these problems, the need for a re-usable document description language increases. In this paper, we defined Template file that is common data to service mobile devices. We proposed a method that could be an effective wireless web service though design and the implementation of the Call manager & the XSL Generator. In the methodology, when requesting a wireless internet service, a mobile device finds out markup language and a hardware specification of the mobile device through the Call Manager component supports. The XSL Generator component creates the XSL file dynamically that is the most suitable to a device. Finally, contents is serviced to each device by XSLT. It can generate a wireless page more easily by reusing the existing web contents through such course. Therefore, it can save the time and expense for generating a wireless page.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.71-79
• /
• 2016

As computer technology continues to evolve, the Computational Sciences utilized in Physics, Chemistry, Materials Science, and Life Sciences have been attracting more attention. In Korea, to compensate for the drawbacks in Computational Science, students and researchers have been using the EDISON platform. The EDISON platform provides a web portal service for education and research and an environment for addressing complex issues involving five fields, e.g., Computational Fluid Dynamics (CFD), Nanophysics, Computational Chemistry, Structural Dynamics, and Computational Design. As the platform and user scale increase beyond service provision, the need for efficient operation of its currently running data management system is on the rise. In this study, we resolve the data synchronization issues between the existing EDISON platform and web portal. As the EDISON platform is integrated with the web portal, a file management service is implemented to integrate the management of user data and files, which ultimately improves the overall efficiency of file management.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2016

In the future network such as Internet of Things (IoT), the number of computing devices are expected to grow exponentially, and each of the things communicates with the others and acquires information by itself. Due to the growing interest in IoT applications, the broadcasting in Opportunistic ad-hoc networks such as Machine-to-Machine (M2M) is very important transmission strategy which allows fast data dissemination. In distributed networks for IoT, the energy efficiency of the nodes is a key factor in the network performance. In this paper, we propose a fuzzy logic based probabilistic multi-hop broadcast (FPMCAST) algorithm which statistically disseminates data accordingly to the remaining energy rate, the replication density rate of sending node, and the distance rate between sending and receiving nodes. In proposed FPMCAST, the inference engine is based the fuzzy rule base which is consists of 27 if-then rules. It maps input and output parameters to membership functions of input and output. The output of fuzzy system defines the fuzzy sets for rebroadcasting probability, and defuzzification is used to extract a numeric result from the fuzzy set. Here Center of Gravity (COG) method is used to defuzzify the fuzzy set. Then, the performance of FPMCAST is evaluated through a simulation study. From the simulation, we demonstrate that the proposed FPMCAST algorithm significantly outperforms flooding and gossiping algorithms. Specially, the FPMCAST algorithm has longer network lifetime because the residual energy of each node consumes evenly.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.11-16
• /
• 2005

The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.3
• /
• pp.243-250
• /
• 2011

This experiment was conducted to evaluate agronomic characteristics, forage quality and dry matter (DM) yield of early-maturing hairy vetch 'Cold green', 'Haymaker plus', 'Cappello' and medium-late maturing cultivar 'Cheong pa', 'Challenger', 'Hungvillosa' and 'Latigo' at Seongju in the Kyeongbuk from 2009 to 2011. The experiment was arranged in randomized complete block design with three replications. Hairy vetchs were seeded on Sep. 26 and Oct. 11 in 2009 and 2010. Vetch plants were harvested on 30 Apr. in 2010 and 2011. Cold tolerance for Haymaker plus and Cappello were a little lower than other cultivars. Fifty percent-flowering dates of Cold green had earlier than others and Haymaker plus and Cappello were earlier than Cheong pa, Challenger, Hungvillosa and Latigo. Cheong pa and Challenger were ealirer than Hungvillosa and Latigo. The DM yield of Cold green was the highest (p<0.05) of the cultivar except Haymaker plus. Haymaker plus was higher (p<0.05) than others and Cappello, Cheong pa, Challenger were higher (p<0.05) than Hungvillosa and Latigo in 2010. In 2011, the DM yield of Cold green was the highest (p<0.05) of the cultivar and Haymaker plus was higher (p<0.05) than others. Cappello was higher (p<0.05) than Hungvillosa and Latigo. Cheong pa and Challenger were higher (p<0.05) than Latigo. Vetch cultivar was high in crude protein (CP) and low in Acid detergent fiber (ADF). According to the results obtained from this study, it is suggested that early-maturing cultivar would be recommendable for fall sown vetch for DM production.