• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.153-171
• /
• 2015

Twelve large-scale composite deck slabs were instrumented and tested in a cantilever diaphragm configuration to assess the effect of fibers and welded wire mesh (WWM) on the in-plane shear capacity of composite deck slabs. The slabs were constructed with reentrant decking profile and reinforced with different types and dosages of secondary reinforcements: Conventional welded wire mesh (A142 and A98); synthetic macro-fibers (dosages of $3kg/m^3$ and $5.3kg/m^3$); and hooked-end steel fibers with a dosage of $15kg/m^3$. The deck orientation relative to the main beam (strong and weak) was also considered in this study. Fibers and WWM were found efficient in distributing the applied load to the whole matrix, inducing multiple cracking, thereby enhancing the strength and ductility of composite deck slabs. The test results indicate that fibers increased the slab's ultimate in-plane shear capacity by up to 29% and 50% in the strong and weak directions, respectively. WWM increased the ultimate in-plane shear capacity by up to 19% in the strong direction and 9% in the weak direction. The results suggest that discrete fibers can provide comparable diaphragm behavior as that with the conventional WWM.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.332-337
• /
• 2000

Forming mechanism of fibrous TiC during self-propagating high temperature synthetic reaction was analyzed and suggested. It was revealed that critical temperature for the stable fiber formation was not the melting point of TiC, but the eutectic reaction temperature of TiC and C. Minimum amount of TiC diluent addition required to form fibers was calculated to be 25.6%, which was consistent with the experimental result. Synthesized fibers were found hollow tube-like. The morphology was explained by the diffusion rates of C and Ti in TiC, and by the molar volume chnage of C during the reaction. Expanding shell model was suggested for the hollow fiber formation mechanism.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.393-401
• /
• 2018

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.999-1018
• /
• 2016

Enhanced tensile properties of fiber reinforced concrete make it suitable for strengthening of reinforced concrete elements due to their superior corrosion resistance and high tensile strength properties. Recently, the use of fibers as strengthening material has increased motivating the development of numerical tools for the design of this type of intervention technique. This paper presents numerical analysis results carried out on a set of concrete beams reinforced with short fibers. To this purpose, a database of experimental results was collected from an available literature. A reliable and simple three-dimensional Finite Element (FE) model was defined. The linear and nonlinear behavior of all materials was adequately modeled by employing appropriate constitutive laws in the numerical simulations. To simulate the fiber reinforced concrete cracking tensile behavior an approach grounded on the solid basis of micromechanics was used. The results reveal that the developed models can accurately capture the performance and predict the load-carrying capacity of such reinforced concrete members. Furthermore, a parametric study is conducted using the validated models to investigate the effect of fiber material type, fiber volume fraction, and concrete compressive strength on the performance of concrete beams.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.41-41
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.329-335
• /
• 2001

In this study, synthetic fiber fabrics such as polyester, nylon 6, acrylic and acetate were dyed with indigoid vat dye. The effects of the composition of alkaline reduction, dyeing time and dyeing temperature on color strength and color fastness of the fabrics were investigated. Also the color fastnesses to wash and light of the dyed fabrics were studied. In dyeing of polyester, nylon, acrylic and acetate fiber fabrics with indigo vat dyes, it appears that these fabrics have high values of K/S up to Ig/L of sodium hydroxide and 6g/L of reducing agent. Indigo vat dyeing for synthetic fiber fabrics was verb fast, and lead to dyeing equilibrium within twenty minutes. The K/S values of dyed fabrics did not changed in dye concentration more than 10% o.w.f.. Synthetic fiber fabrics dyed with indigoid dyes had bad light fastness.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권2호
• /
• pp.81-88
• /
• 2013

Wet-spun silk fibers have attracted the attention of many researchers because of 1) the unique properties of silk as a biomaterial, including good biocompatibility and cyto-compatability and 2) the various methods available to control the structure and properties of the fiber. Cellulose nanofibrils (CNFs) have typically been used as a reinforcing material for natural and synthetic polymers. In this study, CNF-embedded silk fibroin (SF) nanocomposite fibers were prepared for the first time. The effects of CNF content on the rheology of the dope solution and the characteristics of wet-spun CNF/SF composite fibers were also examined. A 5% SF formic acid solution that contained no CNFs showed nearly Newtonian fluid behavior, with slight shear thinning. However, after the addition of 1% CNFs, the viscosity of the dope solution increased significantly, and apparent shear thinning was observed. The maximum draw ratio of the CNF/SF composite fibers decreased as the CNF content increased. Interestingly, the crystallinity index for the silk in the CNF/SF fibers was sequentially reduced as the CNF content was increased. This phenomenon may be due to the fact that the CNFs prevent ${\beta}$-sheet crystallization of the SF by elimination of formic acid from the dope solution during the coagulation process. The CNF/SF composite fibers displayed a relatively smooth surface with stripes, at low magnification (${\times}500$). However, a rugged nanoscale surface was observed at high magnification (${\times}10,000$), and the surface roughness increased with the CNF content.

• 콘크리트학회논문집
• /
• 제14권6호
• /
• pp.900-909
• /
• 2002

섬유는 콘크리트의 취약점인 인장 및 균열저항성을 증가시켜 그 효용성을 크게 한다. 그러나, 섬유의 균열저항성을 합리적으로 예측하기 위해서는 균열후의 거동예측기법이 정립되어야 한다. 따라서, 본 연구의 목적은 최근 들어 개발되고 있는 구조용 합성섬유 보강콘크리트의 균열후 거동(Post-Cracking Behavior)을 예측하기 위한 해석기법을 제시하는데 있다. 이를 위하여 합성섬유 보강 콘크리트 보의 균열단면해석에 있어서, 우선적으로 균열단면을 강체운동으로 가정하고, 균열폭(crack width) 및 균열면에 대해 기울기 90$^{\circ}$ 인 단일섬유의 인발실험(pullout test)에 의한 인발 하중(pullout load)과 변위(slip)의 관계를 이용하여 개개 섬유의 균열이후 거동을 묘사하였다. 또한 실제 섬유의 매립방향과 매립길이의 다양성을 확률적으로 고려하여 균열면에서의 유효섬유개수를 산정한 뒤에 FRC 보의 휨거동해석을 수행하였고, FRC 보 실험을 시행한 결과와 비교한 결과 잘 일치하는 것으로 나타났다. 본 해석결과로부터 하중-처짐 곡선, 모멘트-곡률 곡선 등을 도출할 수 있으며, 본 연구의 모델은 일정수준의 균열 저항성 또는 인성지수(toughness performance)를 얻기 위한 섬유의 기하형상을 개발하는데 유용한 방법으로 사용될 수 있다. 또한 평균응답, 파괴모드의 운동학으로 표현된 이 모델은 FRC 보 실험 결과들을 유사하게 예측할 수 있기 때문에 앞으로 섬유보강콘크리트 부재의 합리적인 설계 및 해석에 효율적으로 활용될 수 있을 것으로 사료된다.

• 한국의류학회지
• /
• 제35권4호
• /
• pp.431-441
• /
• 2011

Microbial colorants produced from Zooshikella sp. were developed as a reddish dye for fabrics. The reddish colorants were extracted from cell mass of Zooshikella sp. using 100% ethanol and were identified as prodiginine by 1H-NMR and FT-IR analysis. Microbial prodiginine had a maximum spectrophotomatric absorbance at 530nm and were chemically stable and 30 to $60^{\circ}C$. The microbial prodiginine could dye natural fibers such as cotton, silk, and wool as well as synthetic fibers such as nylon. The maximum K/S values of the dyed fiber were shown at 540 run with a color appearance of RP (reddish purple). Silk and nylon had an excellent dyeability among the experimental fibers. The optimum pH for the dyeing of experimental fibers was at pH 3.0 and dyeability was improved as the temperature increased. The cover change of dyed multifiber fabrics with the microbial prodiginine were measured after washing with detergents and a dry cleaning solvent for the selection of a proper fabric against microbial prodiginine. Among the experimental fibers, silk and nylon did not show significant color change after washing. Therefore, under the criteria of dyeability, silk and nylon were excellent fabrics for being dyed by microbial prodiginine.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.29-35
• /
• 2013

The objective of the current study is to evaluate the effects depending on the types of reinforcing fibers being influential in view of mechanical properties and impact resistance of hybrid fiber reinforced concrete (HFRC) for applications to precast concrete structure. Hybrid fibers applied therefor were three types such as PP/MSF (polypropylene fiber+macro synthetic fiber), PVA/MAF (polyvinyl alcohol fiber+MSF) and JUTE/MSF (natural jute fiber+MSF), where the volume fraction of PP, PVA and natural jute was applied with 0.2 %, respectively, while based on 0.05 % volume fraction of MSF. The HFRC was tested for slump, compressive strength, flexural strength and impact resistance. The test result demonstrated that mixture of such hybrid fibers improve compressive strength, flexural strength and impact resistance of concrete. Moreover, it was found that HFRCs to which hydrophilic fibers, i.e. PVA/MSF and JUTE/MSF, were mixed show more improved features that HFRC to which non-hydrophilic fiber, i.e. PP/MSF was mixed. Meanwhile, the finding that PVA/MSF HFRC exhibited better performance than JUTE/MSF HFRC was attributed from the former having higher aspect ratio than that of the latter.