• 정보처리학회논문지C
• /
• 제13C권3호
• /
• pp.383-388
• /
• 2006

대부분의 GIS 서비스들은 단일 어플리케이션에서 동작되어 왔으며, 데이터 처리와 컴퓨터 및 모바일 기술의 급속한 발전에 사용자들은 각각의 GIS 자체 데이터와 이질적인 다른 여러 지리정보시스템의 효율적인 공유를 요구하고 있다. 그러나 많은 GIS 어플리케이션들은 자체 데이터 포맷을 유지하고 있어 상이한 데이터 포맷에 대해서 처리하지 못하며, 모바일 GIS를 위한 필터링 기능이 없는 단점을 가지고 있다. 본 논문에서는 현재 사용되고 있는 지리 정보인 DXF(Drawing eXchange Format), DWG(DraWinG), SHP(SHaPefile) 등의 다양한 포맷이 가지는 특성을 수용하고 지도를 표현하기 위한 핵심 정보를 추출하는 모듈을 설계하며, 통합 뷰에 의해 가시화하여 다양한 포맷의 일관성을 보이며, 모바일 디바이스로의 확장을 위해 추출된 핵심 데이터를 GML로 생성하는 SMP(Synthetic Map Preprocessor)를 설계한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.6-107
• /
• 2002

$\textbullet$ An autonomous mobile robot was controlled through the Internet. $\textbullet$ For the direct control, the feedback data should be provided properly. $\textbullet$ Therefore, an efficient communication scheme should be defined. $\textbullet$ To overcome the transmission delay, the highly abstracted message format was used. $\textbullet$ As the feedback data, the real image sequences may suffer the transmission delay or loss of content. $\textbullet$ To resolve this, the feature information was used to construct the synthetic feedback information. $\textbullet$ By doing this, the operator could feel the hands-on control with an Internet-based robot.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.27-33
• /
• 1997

A neural network approach has been developed to determine the depth of a surface breaking crack in a steel plate from ultrasonic backscattering data. The network is trained by the use of feedforward three-layered network together with a back-scattering algorithm for error correction. The signal used for crack insonification is a mode converted 70$^{\circ}$transverse wave. A numerical analysis of back scattered field is carried out based on elastic wave theory, by the use of the boundary element method. The numerical data are calibrated by comparison with experimental data. The numerical analysis provides synthetic data for the training of the network. The training data have been calculated for cracks with specified increments of the crack depth. The performance of the network has been tested on other synthetic data and experimental data which are different from the training data.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.803-810
• /
• 2007

Although synthetic aperture focusing techniques can improve the spatial resolution of ultrasound imaging, they have not been employed in a commercial product because they require a real-time N-channel beamformer with a tremendously increased hardware complexity for simultaneous beamforming along M multiple lines. In this paper, a hardware-efficient beamformer architecture for synthetic aperture focusing is presented. In contrast to the straightforward design using NM delay calculators, the proposed method utilizes only M delay calculators by sharing the same values among the focusing delays which should be calculated at the same time between the N channels for all imaging points along the M scan lines. In general, synthetic aperture beamforming requires M 2-port memories. In the proposed beamformer, the input data for each channel is first upsampled with a 4-fold interpolator and each polyphase component of the interpolator output is stored into a 2-port memory separately, requiring 4M 2-port memories for each channel. By properly limiting the area formed with the synthetic aperture focusing, the input memory buffer can be implemented with only 4 2-port memories and one short multi-port memory.

• 한국수소및신에너지학회논문집
• /
• 제10권4호
• /
• pp.233-243
• /
• 1999

Combustion characteristics of synthetic gas from flame pyrolysis gasification of polymetric wastes are reported and the applicability of synthetic gas from flame pyrolysis gasification to a gas engine system is presented. Engine power is easily predicted by the volume percentage of the synthetic gas. Measurements have been made to obtain the range of flame existence in the function of volume percentage of CO and $H_2$ gases in the synthetic gas. In order to clarify the emission of the flames, NOx measurements by chemiluminescent analyser are taken in flames with different equivalent ratios. From the results of the engine performance data we also have demonstrated that the output of the gas engine modified from a LPG engine is about 5 ps at normal rating. We conclude that synthetic gas from flame pyrolysis gasification of polymetric wastes is applicable to a gas engine system.

• 대한화학회지
• /
• 제13권3호
• /
• pp.233-240
• /
• 1969

The synthesis is described of new pepsin substrates of benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine ethyl ester and benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine for studies on the specificity of pepsin, and thin layer chromatographic examination of the peptides prepared showed the new substrates are homogeneous and also, same examination of the incubation mixtures showed that two synthetic substrates are cleaved by pepsin at the L-tyrosyl-L-phenylalanyl bond and hydrolysis of these substrates by pepsin is achieved without transpeptidation. It is found that synthetic peptides are moderately soluble with the amount of the substrate up to a concentration of 0.7 mM in aqueous sodium citrate buffers (0.04 M) in the pH range 1.8-4.0, thus obviating the necessity for the adding of an organic solvent in the assay mixture. The kinetic parameters for synthetic substrates are tabulated in the following table. The data in the table indicate that the susceptibility of synthetic peptides to peptic hydrolysis are relatively large and the change of the carboxyl-terminal group of synthetic substrate from glycine ethyl ester to glycine causes a small decrease in the susceptibility of the L-tyrosyl-L-phenylalanyl bond.

• Journal of Radiation Protection and Research
• /
• 제44권4호
• /
• pp.149-155
• /
• 2019

Background: Magnetic resonance (MR) image guided radiation therapy system, enables real time MR guided radiotherapy (RT) without additional radiation exposure to patients during treatment. However, MR image lacks electron density information required for dose calculation. Image fusion algorithm with deformable registration between MR and computed tomography (CT) was developed to solve this issue. However, delivered dose may be different due to volumetric changes during image registration process. In this respect, synthetic CT generated from the MR image would provide more accurate information required for the real time RT. Materials and Methods: We analyzed 1,209 MR images from 16 patients who underwent MR guided RT. Structures were divided into five tissue types, air, lung, fat, soft tissue and bone, according to the Hounsfield unit of deformed CT. Using the deep learning model (U-NET model), synthetic CT images were generated from the MR images acquired during RT. This synthetic CT images were compared to deformed CT generated using the deformable registration. Pixel-to-pixel match was conducted to compare the synthetic and deformed CT images. Results and Discussion: In two test image sets, average pixel match rate per section was more than 70% (67.9 to 80.3% and 60.1 to 79%; synthetic CT pixel/deformed planning CT pixel) and the average pixel match rate in the entire patient image set was 69.8%. Conclusion: The synthetic CT generated from the MR images were comparable to deformed CT, suggesting possible use for real time RT. Deep learning model may further improve match rate of synthetic CT with larger MR imaging data.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.405-410
• /
• 2014

In this paper, we compare the quality of images reconstructed by a conventional delayed-sum (DS) algorithm and radiation pattern-based DS algorithm. In order to evaluate the quality of images, we apply the target-to-clutter ratio (TCR), which is commonly used in synthetic aperture radar (SAR) image assessment. The radiation pattern-based DS algorithm enhances the TCR of the image by focusing the target signals and preventing contamination of the radar scene. We first consider synthetic data obtained through GprMax2D/3D, a finite-difference time-domain (FDTD) forward solver. Experimental data of a 2-GHz bandwidth stepped-frequency signal are collected using a vector network analyzer (VNA) in an anechoic chamber setup. The radiation pattern-based DS algorithm shows a 6.7-dB higher TCR compared to the conventional DS algorithm.

• 한국의상디자인학회지
• /
• 제2권2호
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1138-1145
• /
• 2011

The internal broadband noise of a centrifugal fan in a household refrigerator is predicted using hybrid CAA techniques based on stochastic turbulent synthetic model. First, the unsteady flow field around the centrifugal fan is predicted using computational fluid dynamics(CFD) method. Then, the turbulent flow field is synthesized by applying the stochastic turbulent synthetic technique to the predicted flow field. The aerodynamic noise sources of the centrifugal fan are modeled on a basis of the synthesized turbulent field. Finally, the internal broadband noise of the centrifugal fan is predicted using the boundary element method(BEM) and the modeled sources. The predicted noise spectrum is compared with the experimental data. It is found that the predicted result closely follows the experimental data. The proposed method can be used as an effective tool for designing low-noise fans without expensive computational cost required generally for the LES and DNS simulations to resolve the turbulence flow field responsible for the broadband noise.