• 한국항공우주학회지
• /
• 제45권4호
• /
• pp.318-327
• /
• 2017

최근 날씨와 주야 조건에 상관없이 지구 관측을 수행할 수 있는 영상레이더 탑재체가 활발하게 연구되고 있다. 한국항공우주연구원은 2013년 한국 최초의 영상레이더 위성인 다목적실용위성5호를 성공적으로 개발 및 발사하였으며 현재 영상레이더 차세대 시리즈 위성인 다목적실용위성6호를 개발하고 있다. 본 논문은 영상레이더 탑재체의 설계와 분석을 위하여 필수적인 영상레이더 탑재체 시스템 성능 분석 시뮬레이터의 개발에 관한 것이다. 시스템 성능 분석 시뮬레이터는 안테나 패턴 생성 시뮬레이터와 시스템 성능 분석 시뮬레이터, 그리고 영상 품질 분석 시뮬레이터로 이루어진다. 영상레이더시스템 성능 분석 시뮬레이터의 시뮬레이션 결과로부터 영상레이더 설계 단계에서 위성용 영상레이더 탑재체의 설계 및 분석 툴로써 적용 가능할 것으로 기대한다.

• 한국건축시공학회지
• /
• 제20권3호
• /
• pp.245-252
• /
• 2020

합성수지 거푸집은 내부식성이 우수한 경량의 고밀도 폴리에틸렌(HDPE)를 재료로 사용한다. 합성수지 거푸집의 전과정 평가를 위하여 ISO FDIS 13352에서 요구하는 시스템 경계를 만족하도록 공정 흐름도를 고려하였다. 이에 따라 고려된 시스템 경계는 Cradle-to- Product shipmen이다. 고려된 시스템 경계에서 투입 에너지원, 사용재료, 운송수단, 제작공정 등으로부터 산정한 전과정 목록(LCI) 데이터베이스를 분석하였다. 합성수지 거푸집의 LCI 데이터 분석으로 부터 환경부의 환경영향평가지수 방법론에 기반하여 분류화, 정규화, 특성화 및 가중치 과정을 거쳐 환경영향평가를 수행하고, 그 결과는 유로폼의 환경영향 평가값과 비교하였다. 실험결과, 전용횟수를 고려한 CO₂ 배출량은 유로폼 대비 2배 이상의 전용성을 갖는 합성수지 거푸집이 약 32 % 가량 낮았다. 이는 합성수지 거푸집 사용은 유로폼 대비 자재 생산을 1/2로 줄일 수 있으며, CO₂ 배출량 저감으로 이어질 수 있다.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.29-36
• /
• 2010

합성과 천연 에메랄드의 열처리에 따른 분광특성 변화를 가시광선과 적외선 분광분석으로 관찰하였다. X-선 형광분석 결과 flux 합성 에메랄드에서는 Mo과 Co이 검출 되었고, hydrothermal 합성 에메랄드에서는 Cl 성분이 나타났다. 자외선-가시광선 분광분석 결과는 콜롬비아산 에메랄드 시료에서 열처리 후에 전체적인 흡수 세기가 증가 한 것을 확인 하였다. 적외선 분광 분석 결과, hydrothermal 합성 에메랄드에서 Cl 성분에 관련된 피크가 $3000-2600cm^{-1}$에서 나타났고, 천연 에메랄드에서는 $CO_2$에 기인하는 $2358cm^{-1}$피크가 열처리후에 감소된 것을 확인하였다. 이는 열처리 후에 기체 성분이 변화된 것과 일치 하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.46-53
• /
• 2008

Recently, the synthetic material stern tube bush has been applied by ship owner's requirement because the synthetic material has a merit. That is to say, when stern tube seal is damaged and sea water comes into stern tube, it can work without problem because of water lubricating property. However, the material also has a demerit of temperature rise problem when some factors meets on synthetic material, for example, not sufficient lubrication oil supply and not proper shaft alignment and so on. As known in the world, the RAILKO bush is rampant for synthetic material by some ship owner because of the above mentioned reason. However, the bush has several accidents on large container vessel. Unfortunately or fortunately our yard has a chance to apply the RAILKO bush owing to requirement of specific ship owner. Therefore, it is much more required to approach the accurate shaft alignment analysis. In line with this reason, we had a shaft alignment calculation considering hull deformation and hull flexibility (hull stiffness). Also, in the calculation, we had considered dynamic condition which is reflected he propeller thrust forces and moments and oil film stiffness on the shaft alignment calculation. According to he shaft alignment calculation, bearing slope was applied on the tern tube bush and was measured. The RAILKO bush should be applied the running in procedure according to maker's recommendation for performing the oil film on the bush surface. Finally, the vessels were delivered successfully without any problem with AILKO bush as shown on his paper.

• 논리연구
• /
• 제14권3호
• /
• pp.101-137
• /
• 2011

마틴뢰프는 그의 직관주의적 유형론에서의 판단형식들에 관한 분석에 의거하여, 통상적인 논리법칙들과 수학의 흥미로운 판단들은 분석판단이 아닌 종합판단에 해당하며, 분석판단의 논리는 결정가능하고 완전하지만 종합판단의 논리는 결정가능하지 않으며 불완전하다고 주장한다. 이 글의 목적은 마틴뢰프의 논지를 보다 분명히 하여 검토하려는 것이다. 1절에서 필자가 이해한 단형 유형론의 기본 사항들을 검토한 후, 2절에서는 마틴뢰프의 분석/종합 구분을 보다 분명히 드러내고, 마틴뢰프의 구분에 대한 가능한 비판 및 '통상적인 논리법칙들과 수학의 흥미로운 판단들은 종합판단에 해당한다'는 논제를 검토한다. 3절에서는 '분석판단의 논리는 결정가능하고 완전하지만 종합판단의 논리는 결정가능하지 않으며 불완전하다'는 논제를 보다 분명히 드러내어 검토한다.

• Korean Journal of Radiology
• /
• 제22권8호
• /
• pp.1352-1368
• /
• 2021

Objective: For an accurate dynamic contrast-enhanced (DCE) MRI analysis, exact baseline T1 mapping is critical. The purpose of this study was to compare the pharmacokinetic parameters of DCE MRI using synthetic MRI with those using fixed baseline T1 values. Materials and Methods: This retrospective study included 102 patients who underwent both DCE and synthetic brain MRI. Two methods were set for the baseline T1: one using the fixed value and the other using the T1 map from synthetic MRI. The volume transfer constant (K^trans), volume of the vascular plasma space (v_p), and the volume of the extravascular extracellular space (v_e) were compared between the two methods. The interclass correlation coefficients and the Bland-Altman method were used to assess the reliability. Results: In normal-appearing frontal white matter (WM), the mean values of K^trans, v_e, and v_p were significantly higher in the fixed value method than in the T1 map method. In the normal-appearing occipital WM, the mean values of v_e and v_p were significantly higher in the fixed value method. In the putamen and head of the caudate nucleus, the mean values of K^trans, v_e, and v_p were significantly lower in the fixed value method. In addition, the T1 map method showed comparable interobserver agreements with the fixed baseline T1 value method. Conclusion: The T1 map method using synthetic MRI may be useful for reflecting individual differences and reliable measurements in clinical applications of DCE MRI.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.103-108
• /
• 1995

By applying the P$_1$ and P$_2$ equations to the operator form of a synthetic acceleration, we derive the p,-acceleration (diffusion synthetic acceleration: DSA) and P$_2$-acceleration (p$_2$SA) schemes in one dimensional slab geometry. We Fourier-analyze the derived acceleration schemes with the discrete-ordinates transport equation and showed that the DSA outperforms the P$_2$SA. These results confirm that one cannot simply assume that replacement of the DSA with a higher order approximation will lead to a better acceleration performance.

• 통합자연과학논문집
• /
• 제10권3호
• /
• pp.171-174
• /
• 2017

Non-hydrolyzable fluorinated organosilicon compounds as an eletrolyte for the application of lithium-ion batteries (LIB) are synthesized. New synthetic method for the perfluorinated organosilicon compound containing spacer such as ethyl and propyl group with cyano moiety instead of ethylene glycol to prevent hydrolysis and to promote conductivity are developed in one pot reaction with moderately high yield. Air-sensitive boron trifluoride etherate is no longer required in this reaction. The products are characterized by spectroscopic analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.43.2-43.2
• /
• 2010

In this study, metallurgical grade (MG) silicon with 99% purity produced by arc furnace process was systematically investigated for slag refining. The most problematic impurities to remove from MG silicon are boron (B) and phosphorus (P). To remove B and P from MG-silicon, we used synthetic slag in the molten state. MG-silicon with synthetic slag of CaO, $SiO_2$, and $CaF_2$ was melted using by high-frequency induction furnace with electrical output of 50kW. Specimens prepared by various refining process conditions(holding time, mixture ratio) were inspected by combined analysis of ICP-MS and XRF. With this approach, B has been reduced to <5ppm, P to <1ppm and other impurities to 0.1~0.2% except for Calcium. Calcium has been increased from 17ppm to 1500ppm. Problem of calcium contamination will be resolved by additional refining processes.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.415-419
• /
• 2016

As the need for clean coal technology has grown, so has the global research and development efforts into integrated gasification combined cycle (IGCC) plants. An IGCC plant couples a gas turbine to a gasification block. Various technical and economic problems exist in designing such a system. One such problem is the difficulty in realizing economies of scale because the single-train flow capacity of commercial IGCC synthetic gas turbine plants is limited; the capacity does not exceed a net power rating of 300 MW. To address this problem, this study modeled and simulated a synthetic gas turbine with the goal of evaluating the feasibility of a 500 MW or larger IGCC plant. First, a gas turbine with the best output and efficiency was chosen for use with natural gas. The turbine was modeled using GateCycle (a simulation tool), and the integrity of the model validated by comparing the result to the design value. Next, off-design modeling was carried out for a gas turbine with synthetic gas based on its on-design model, and the result was compared with the study result of the gas turbine manufacturer. The simulation confirmed that it is possible to create a large capacity IGCC plant by undertaking the remodeling of a gas turbine designed to use natural gas into one suitable for synthetic gas.