• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.2
• /
• pp.85-93
• /
• 2022

Objectives: The aim of this study was to compare morbidities and duration of surgery, as well as bone formation in alveolar defects reconstructed with symphysis bone combined with allograft and iliac crest bone graft in patients with cleft palate. Patients and Methods: This randomized clinical trial was performed with 22 patients with unilateral alveolar cleft with a follow-up period of 12 months. In 12 patients, alveolar defects were reconstructed with chin bone graft plus allograft (Group A), while for the other 10 patients, iliac bone crest was used as donor site (Group B). Duration of surgery as well as occurrence of morbidities and complications were recorded. In addition, cone-beam computed tomographic (CBCT) scans were performed before surgery and 12 months after surgical procedures in order to compare bone formation between the two groups. Results: Postoperative CBCT demonstrated a mean bone fill percentage of 76.9% of the alveolar defect in Group A, compared with 77.0% in Group B. Paresthesia in the lower lip or chin did not occur in any patients of Group A. The mean duration of the surgical process was significantly shorter for Group A (40 minutes vs 76 minutes, P<0.001). In addition, patients in Group A regained normal gait faster than patients in Group B (1 day vs 9.5 days). Conclusion: Mandibular symphysis bone graft in combination with allograft results in favorable outcomes in patients with unilateral alveolar clefts.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.361-373
• /
• 2002

The purpose of this study was to evaluate the morphological changes of olveolar bone and mandibular symphysis of lower incisor by presurgical orthodontic treatment and orthognathic surgery in skeletal class III malocclusion. The sample consisted of 30 adult class III malocclusion patients who have received bilateral sagittal split mandibular osteotomy. Lateral cephalograms were taken before treatment, after presurgical orthodontic treatment and 3 months after orthognathic surgery. Skeletal and symphyseal measurements were compared and the relationships between them were analysed. The results were as follow : 1. The labial and lingual alveolar bone height in presurgical and postsurgical group were decreased than that of pretreatment group. 2. The vertical measurements of the craniofacial skeleton showed reverse correlationship with anteroposterior width of basal alveolar bone, but IMPA showed correlatiionship (p<0.01) 3. The craniofacial skeleton and the change of symphyseal measurements(symphyseal length, symphyseal width) showed no correlationship. 4. The labial alveolar bone height showed correlationship with lingual alveolar bone height(p<0.001), and negative correlationship with lingual alveolar crestal width(p<0.01). Labial and lingual alveolar crestal width has negative correlationship (p<0.05). Mandibular symphyseal length and width has positive correlationship(p<0.01). 5. IMPA, LISA showed negative correlationship with labiolingual alveolar bone height and lingual alveolar width and positive correlationship with labial alveolar base bone width.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.581-595
• /
• 2001

In performing implant procedures in the anterior portion of the maxilla, many difficulties exist because of anatomical reasons, such as the proximity of the nasal floor, lateral extension of the incisive canal, and labial concavity. On the other hand, in the posterior region of the maxilla, there is often insufficient recipient bone between the maxillary sinus and alveolar ridge due to alveolar ridge resorption and pneumatization of the maxillary sinus. In order to perform implants in such regions, ridge augmentation procedures such as onlay bone graft, guided bone regeneration, and maxillary sinus grafting are performed. In studies of Caucasians, use of autograft from mandibular symphysis has been reported to be highly successful in maxillary sinus grafting. However, in a clinical study of Koreans, autograft of mandibular symphysis has been reported to have significantly low success rate. It has been hypothesized that this is because of insufficient cancellous bone due to thick cortical bone. In order to test this hypothesis, bone quality and morphology of Koreans can be compared with those of Caucasians. In this study, the bone density and morphology of the cortical bone and cancellous bone in the mandibular symphysis of 35 Korean cadavers were evaluated. The following results were obtained: 1. In terms of bone density, type I, type II, and type III consisted of 1.4%(3/213), 72.3%(154/213), and 26.3%(56/213) of the cross-sectioned specimens, respectively. In general, the bone density tended to change from type II to type III, as cross-sectioned specimens were evaluated from the midline to the canine. Type IV wasn't observed in this study. 2. The distance between the root apex and the lower border of the cancellous bone was 18.34mm-20.59mm. Considering that the bone has to be cut 5mm below the root apex during the procedure, autografts with about 15mm of vertical thickness can be obtained. 3. The thickness of cortical bone on the labial side increased from the root apex to the lower border of the mandible. The average values ranged from 1.43mm to 2.36mm. 4. The labio-lingual thickness of cancellous bone ranged from 3.43mm to 6.51mm. The thickness tended to increase from the apex to the lower border of the mandible and decrease around the lower border of cancellous bone. From the above results, the anatomic factors of the mandibular symphysis (bone density, thickness, quantity and length of the cortical bone and cancellous bone) didn't show any difference from Caucasians, and it cannot be viewed as the cause of failure in autografts in the maxillary sinus for implants.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.5
• /
• pp.480-488
• /
• 2008

Orthodontists often treat cases which are difficult to treat with conventional orthodontics. In such cases, it could be treated with surgical procedures with the help of an oral surgeon. Especially, transverse deficiency of the mandible can be corrected by widening the transverse width of mandibular symphysis, using distraction osteogenesis. Transverse widening of mandibular sympysis is known as a safe treatment but still complications could occur during the treatment. We are reporting some complications of cases that mandibular symphysis transverse widening were applied. Some cases showed complications because of the inappropriate osteotomy line. Since straight vertical osteotomy line was inclined to the left, only the left bony segment was likely to expand. According to bio-mechanical considerations, it will be better to perform a step osteotomy, cutting the eccentric area of the alveolar crest and the centric area of the basal symphyseal area. Complications could also occur by the failure of the distraction device. The tooth borne distraction device was attached on the lingual side of the tooth with composite resin. During the distraction period, it was impossible to obtain appropriate distraction speed and rhythm because of frequent fall off of the distraction device. Therefore, distraction device should be attached firmly with orthodontic band or bone screw, etc. Tooth mobility increasement could also occur as a complication. 'Walking teeth phenomenon' was observed during the distraction period, showing severe teeth mobility and pain during mastication. These symptoms fade out during the consolidation period. Since the patient could feel insecure and uncomfortable, it should be notified to the patient before the procedure. Finally, alveolar crestal bone loss could occur. Alveolar crestal bone loss occurred because of lack of distraction device firmness and teeth trauma caused by lower lip biting habit. Therefore, adequate firmness of the distraction device and habit control will be needed.

• The Journal of the Korean dental association
• /
• v.57 no.6
• /
• pp.344-351
• /
• 2019

Skeletal Class III malocclusion is a relatively common form of malocclusion in Korea. In borderline cases where only mild skeletal discrepancy exists and if worsening of the facial profile is expected as a result of premolar extraction, mandibular full arch distalization with miniscrews is the treatment of choice. The purpose of this study was to investigate the pattern of tooth movement and evaluate the stability of mandibular full arch distalization and to identify correlation between stability and factors such as initial skeletal pattern, dental changes during treatment and alveolar bone in symphysis region using lateral cephalograms.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.666-671
• /
• 2000

Objectives: This study evaluated the availability of mandibular symphysis corticocancellous block grafts in patients treated for reconstruction of intraoral jaw defects. Materials & Methods: 8 patients with mandibular and maxillary bony defects were treated with corticocancellous block of symphysis. The types of defects included 4 pathologic jaw defects and 4 vertical and/or horizontal alveolar deficiencies. The age ranged from 13 to 45 years. Additional treatments such as plate fixation, alloplastic bony substitutes, and/or barrier membrane application were perfomred. They were evaluated for complications and healing of defects. Follow-up period ranged from 6 to 15 months. Results: 2 patients experienced complications such as wound dehiscence and mild resorption of exposed bone. None of the patients needed secondary operation. Paresthesia of lip, chin, and teeth were recovered completely by 6 months postoperatively. Reconstructed wound showed favorable healing and bony consolidation. Conclusion: Corticocancellous block of mandibular symphysis can be used for the reconstruction of a variety of intraoral local jaw defects selectively. Advantages were easy fixation of graft, possibility of restoration of original alveolar contour, and decreased donor site morbidity.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.209-217
• /
• 1999

This study was concerned with comparing the measured values of labial alveolar bone through the lateral cephalometric radiography and mandibular incisor cross-sectional tomogram between two groups, one group of mandibular prognathism patients who needed an orthognathic surgery as an experimental group and the other group who had normal molar relationships as a control group. The purpose of the study was to find out the predisposing factor of bone resorption and gingival recession before orthodontic treatment. The results were as follows: 1. The cross-sectional area of labial alveolar bony plate in mandibular prognathism was significantly smaller than that of control group. 2. In mandibular prognathism, the distance between cementoenamel junction and alveolar crest was significantly greater than control group. 3. There were negative correlations between area of labial alveolar bony plate and distance from cementoenamel junction to alveolar crest, and positive correlations between area of labial alveolar bony plate and distance from alveolar crest to root apex. 4. In mandibular prognathism, there were positive correlations between IMPA and thickness of symphysis, and negative correlations between IMPA and the alveolar bony height. The results of the present study suggest the mandibular prognathism patients are prone to the gingival recession due to the small amount of labial alveolar bone around lower incisors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.266-275
• /
• 2008

Dental endosseous implants require sufficient alveolar bone volume and quality for complete bone coverage and initial stability. But, atrophy or resorption of alveolar bone height and width according to patient's age and period of tooth loss can prevent ideal implant placement. Bone graft procedure has been proposed before or simultaneously with the placement of dental implants in patients with insufficient alveolar bone volume. While allografts, xenografts, and alloplastic bone grafts have been proposed and studied for alveolar ridge augmentation, the use of autogenous bone grafts represents the 'gold standard' for bone augmentation procedures. Conventional bone grafts are usually harvested from distant sites such as the ilium or ribs. Recently there is a growing use of intraoral bone grafts from intraoral donor sites such as mandibular symphysis, mandibular ramus and maxillary tuberosity. We recommend that the mandibular ramus is a safe autogenous bone graft donor site for bone harvesting with low morbidity. We report various effective autogenous bone graft procedures from mandibular ramus for the implant placement on various atrophic alveolar ridges.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.943-953
• /
• 1999

Severe alveolar ridge deficiency can prevent ideal implant placement. Ridge augmentation procedures are necessary to regain lost alveolar structures. The corticocancellous block bone graft was harvested from the mandibular symphysis. This block bone was fixed to the lateral aspect of the ridge with titanium screws. Seven months later, the autogenous bone graft was reentered and sufficient bone volume was gained to allow implant placement. The fixation screws were removed and 3I implants were inserted. No complication and postoperative alteration in chin contour were observed. This report demonstrates that chin graft offers a predictable alternative in the reconstruction of ridge deficiency for implant placement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2014

Purpose: The aim of this study was to investigate differences between the morphology of the mandibular symphysis and four facial skeletal types. Materials and Methods: 40 cone-beam computed tomographies were selected and classified in to 4 groups according to their vertical and anterior-posterior skeletal patterns. The bone volume ($mm^3$) of the symphysis, the cross sectional area corresponding to the 4 mandibular incisors' axis: the cross sectional area of total bone ($mm^2$), the area of the cancellous bone ($mm^2$) and the thickness (mm) of labial and lingual alveolar bone at 2 mm, 3 mm under the cemento-enamel junction (CEJ) were measured. General linear model (GLM), Kruskal-Wallis test and Tukey honestly significant difference (HSD) test were subsequently used for statistical analysis. Results: The lingual cortical bone thickness of the lateral incisors at 2, 3 mm under CEJ was greater in the Class I low angle group than the other 3 groups (P < 0.05). There were no statistically significant differences in the volume of the mandibular incisor bony support, cross-sectional area of total bone and cancellous bone at the mandibular incisor' axis. Conclusion: Patients in Class I, low angle group have a thicker lingual mandibular symphysis than Class I, high angle patients.