• 제목/요약/키워드: symmetric link

검색결과 42건 처리시간 0.023초

페이딩 채널에서 최선 릴레이 선택을 갖는 네트워크 코딩의 성능 (Performance of Network Coding with Best Relay Selection in Fading Channels)

  • 김남수
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.193-200
    • /
    • 2013
  • 최근 이동통신 뿐 만 아니라 TV방송 등에서도 릴레이를 이용한 양방향 무선채널의 전송효율을 높이기 위한 네트워크 코딩에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 동시에 여러 개의 릴레이가 전송하는 대신 최선의 릴레이를 이용하여 양방향 데이터를 전송하는 네트워크 코딩 시스템의 평균 전송용량 및 오수신율을 유도하였다. 일반적으로 양방향 통신 시스템의 경우 순방향 및 역방향 링크의 데이터 비대칭성이 존재하므로, 데이터 대칭 링크와 비대칭 링크도 포함하여 성능을 유도하였다. 유도한 결과 병렬 릴레이의 수가 증가할수록 공간 다이버시티에 의한 신호 대 잡음비(SNR) 이득이 증가함을 알 수 있었고, 대칭 링크의 경우 주어진 조건하에서 단일 릴레이를 사용하였을 때보다 9개의 릴레이가 존재하는 경우 11.4 dB의 SNR 이득을 얻을 수 있었다. 또한 비대칭 링크의 경우, 오수신율은 데이터 비대칭성보다는 릴레이의 수에 민감하다는 결과를 얻었다.

Influence of steel-concrete interaction in dissipative zones of frames: I - Experimental study

  • Ciutina, Adrian;Dubina, Dan;Danku, Gelu
    • Steel and Composite Structures
    • /
    • 제15권3호
    • /
    • pp.299-322
    • /
    • 2013
  • In the case of seismic-resistant composite dual moment resisting and eccentrically braced frames, the current design practice is to avoid the disposition of shear connectors in the expected plastic zones, and consequently to consider a symmetric moment or shear plastic hinges, which occur only in the steel beam or link. Even without connectors, the real behaviour of the hinge may be different from the symmetric assumption, since the reinforced concrete slab is connected to the steel element close to the hinge locations, and also due to contact friction between the concrete slab and the steel element. The paper presents the results and conclusions of experimental tests on composite portal eccentrically braced frames and beam-to-column moment-resisting joints, carried out within the CEMSIG Research Centre of the Politehnica University of Timisoara, in order to check the validity of the assumption stated above. Reference steel and composite specimens with and without connectors in the plastic zones have been tested under monotonic and cyclic seismic type loading.

Effect of rigid connection to an asymmetric building on the random seismic response

  • Taleshian, Hamed Ahmadi;Roshan, Alireza Mirzagoltabar;Amiri, Javad Vaseghi
    • Coupled systems mechanics
    • /
    • 제9권2호
    • /
    • pp.183-200
    • /
    • 2020
  • Connection of adjacent buildings with stiff links is an efficient approach for seismic pounding mitigation. However, use of highly rigid links might alter the torsional response in asymmetric plans and although this was mentioned in the literature, no quantitative study has been done before to investigate the condition numerically. In this paper, the effect of rigid coupling on the elastic lateral-torsional response of two adjacent one-story column-type buildings has been studied by comparison to uncoupled structures. Three cases are considered, including two similar asymmetric structures, two adjacent asymmetric structures with different dynamic properties and a symmetric system adjacent to an adjacent asymmetric one. After an acceptable validation against the actual earthquake, the traditional random vibration method has been utilized for dynamic analysis under Ideal white noise input. Results demonstrate that rigid coupling may increase or decrease the rotational response, depending on eccentricities, torsional-to-lateral stiffness ratios and relative uncoupled lateral stiffness of adjacent buildings. Results are also discussed for the case of using identical cross section for all columns supporting eachplan. In contrast to symmetric systems, base shear increase in the stiffer building may be avoided when the buildings lateral stiffness ratio is less than 2. However, the eccentricity increases the rotation of the plans for high rotational stiffness of the buildings.

SBIBD를 이용한 분산시스템의 부하 균형 알고리즘 (Synchronous Distributed Load Balancing Algorithm Employing SBIBD)

  • 김성열
    • 한국정보통신학회논문지
    • /
    • 제8권2호
    • /
    • pp.386-393
    • /
    • 2004
  • 분산시스템에서 비집중화된 방법으로 부하균형을 유지하기 위해서는 네트워크상의 각 노드는 다른 노드들의 부하상태정보를 가져야만 한다. 네트워크상에 v 개의 노드가 존재할 때 모든 노드간에 부하정보를 교환하기 위해서는 $Ο({v^2})$의 트래픽 오버헤드가 필요하게 된다. 이 논문에서는 분산된 노드간에 동기적으로 동작하는 부하균형 알고리즘을 제시한다. 이를 위해 먼저 SBIBD(Symmetric Balanced Incomplete Block Design)에 근거하여 (v,k+1,1)구조에 의해 $v={k^2}+k+1$ 개의 노드간의 통신을 위해 2k 정규그래프 구조를 갖는 네트워크 토폴로지를 구성하였다. 이 망에서 동작하도록 고안된 부하균형 알고리즘은 Ο(v√v)의 메시지 오버헤드를 가지면서 각각의 노드가 v개의 모든 노드에 대한 부하상태정보를 가지도록 한다. 또한 이 알고리즘은 모든 링크가 부하상태정보 전송을 위해 √v의 동일한 트래픽을 갖도록 설계되었다.

FWM에 의한 채널 간섭이 존재하는 장거리 WDM 시스템에서의 전력 대칭 MSSI 보상법을 통한 수신 성능 개선 (Reception Performance Improvement of the Long-Haul WDM System with the Channel Interference Due to FWM Effect through the Power Symmetric Mid-Span Spectral Inversion)

  • 이성렬;장원호;이윤현
    • 한국전자파학회논문지
    • /
    • 제13권7호
    • /
    • pp.716-725
    • /
    • 2002
  • 본 논문에서는 FWM(Four Wave Mixing)에 의한 채널 간 간섭이 존재하는 장거리 WDM 전송 시스템에서의 최적 펌프 전력 조건을 만족하는 전력 대칭 MSSI(Mid-Span Spectral Inversion) 보상법의 적용 가능성과 성능개선 정도를 시뮬레이션과 분석적 방법을 통해 검토해 보았다. 먼저 최적 펌프 전력 조건의 MSSI를 채택한 전송 시스템에 입력 광 펄스의 전력과 주파수 첩 파라미터의 변동에 따른 수신단에서의 EOP(Eye Opening Penalty) 평가를 통해 양호한 수신 성능을 유지할 수 있는 최대 송신 전력의 범위를 알아보았고, WDM 수신단에서 FWM에 의한 누화의 영향을 20 dB SNR 이상으로 할 수 있는 채널당 최대 입력 전력의 크기를 채널 간격에 따라 계산해 보았다. 광 송신단에서 변조된 광 펄스가 정도의 차이 없이 down-chirp되어 있는 WDM 전송 링크에 제안된 MSSI 보상을 적용하면 10 Gbps 전송의 경우 양호한 수신 특성을 유지시킬 수 있는 채널 당 최대 입력 전력을 5.3 dBm으로, 채널 간격을 0.4 nm로 하여 최대 68개의 채널 전송이 가능하다는 것을 확인할 수 있었다. 즉 제안한 최적 펌프 전력 조건 하에서의 전력 대칭 MSSI 보상법이 WDM 시스템의 장거리 초광대역 조건을 만족시킬 적합한 새로운 링크 전송 기술임을 확인할 수 있었다.

수 10 Gbit/s 모바일 프론트홀 링크에서 색분산에 의한 OFDM 신호 전송성능 열화 분석 (Degradation of OFDM Signal Performance by Chromatic Dispersion in a Several 10 Gbit/s Mobile Front-haul Link)

  • 원용욱;서동선
    • 전기전자학회논문지
    • /
    • 제20권1호
    • /
    • pp.26-30
    • /
    • 2016
  • 본 논문에서는 광섬유 분산에 의한 직교 주파수 분할 다중방식(OFDM: orthogonal frequency division multiplexing)의 부 반송파 신호왜곡에 대해 조사하였다. 광섬유 색 분산은 OFDM 신호 간의 위상차를 발생시키고, 이는 OFDM 신호 왜곡을 유기하는 비대칭 첨두전력대 평균전력 비율을 유기한다. 광섬유 분산의 영향을 확인하기 위한 실험은 직접검출 광 모바일 프론트홀 시스템에서 수행하였다. 4 Gbit/s의 QPSK-OFDM 심볼의 경우, 100 km 전송에서 EVM이 40 %에 도달함을 확인하였다.

이중 버퍼 제어기 구조의 터보 복호기를 사용한 전송률 가변 비대칭 TDD 시스템 설계 (Design of Variable Data Transfer Rate Asymmetric TDD System Using Turbo Decoder with Double Buffer Controller)

  • 박병관;김미래;김효종
    • 한국항공우주학회지
    • /
    • 제47권2호
    • /
    • pp.161-168
    • /
    • 2019
  • 본 논문에서는 소형 무인기 데이터 링크 시스템에 적용이 가능한 전송률 가변 비대칭 TDD(Time Division Duplex) 방식에 대해 다루었다. 긴 복호 시간이 필요한 터보 복호기를 비대칭 TDD 방식에 적용하기 위하여 이중 버퍼 제어기 구조의 터보 복호기를 제안하였다. 제안 방법은 전송률 가변과 동일 송수신 시간에 최대의 데이터 전송이 가능하다. 제안 방식을 적용한 데이터 링크 시스템을 제작하여 성능을 확인하였다. 측정 결과, 대칭 TDD 방식에 비해 전송률은 최대 약 1.8배 증가하였다. PER(Packet Error Rate) 성능은 동일하며, 전송률 가변이 가능함을 확인하였다.

4세대 이동통신을 위한 FDD 방식을 고려한 점유 주파수 대역폭 산출 (Calculation of FDD-based Occupied Frequency Bandwidth for 4G Mobile)

  • 현영주;이영환;장동원;김경석
    • 한국콘텐츠학회논문지
    • /
    • 제7권10호
    • /
    • pp.10-18
    • /
    • 2007
  • 현재 이동통신 서비스는 TV 및 비디오를 서비스하는 3세대(3G) 이동통신이 이루어지고 있다. 그리고 향후 보다 낮은 비용과 빠른 전송속도를 갖는 4세대(4G) 이동통신이 도래할 것이다. 따라서 본 논문에서는 4세대 이동통신을 위한 기술기준 요소 중 송수신단의 공통 기술기준인 점유 주파수 대역폭을 FDD기반으로 설계하였다. 이동통신의 전송특성은 상/하향의 비대칭적인 통신 트래픽이 예상된다. 따라서 본 논문에서는 상/하향의 점유주파수 대역폭을 1:3과 1:6인 경우를 고려하여 물리계층 파라미터를 제안하였다. 또한 설계된 물리계층 파라미터를 모의실험을 통해 검증하였다. 본 논문의 결과를 4세대 이동통신을 위한 점유주파수 대역폭으로 제안한다.

페리네트를 이용한 필드버스 시스템의 성능 해석 (Performance analysis of fieldbus systems using Petri net)

  • 박홍성;이재수;홍성수
    • 제어로봇시스템학회논문지
    • /
    • 제2권3호
    • /
    • pp.220-228
    • /
    • 1996
  • This paper presents a extended stochastic Petri net (ESPN) model for CTN(Circulated Token with No duration) service in the data link layer of IEC/ISA fieldbus. It is assumed that a station on the fieldbus has a specified minimum token holding time, a finite capacity buffer, and one transmitter queue with the highest priority. The mean transmission (or service) time at a station and the mean token rotation time for the symmetric fieldbus system atr derived using the presented SPN model and the moment generating function. These performance measures are represented in terms of the minimum token holding time, the number of stations, the arrival rate of messages, and the mean length of messages. The presented performance measure are validated by computer simulations.

  • PDF

THE DESIGN OF AN EFFICIENT LOAD BALANCING ALGORITHM EMPLOYING BLOCK DESIGN

  • Chung, Il-Yong;Bae, Yong-Eun
    • Journal of applied mathematics & informatics
    • /
    • 제14권1_2호
    • /
    • pp.343-351
    • /
    • 2004
  • In order to maintain load balancing in a distributed system, we should obtain workload information from all the nodes on network. This processing requires $O(v^2)$ communication overhead, where v is the number of nodes. In this paper, we present a new synchronous dynamic distributed load balancing algorithm on a (v, k + 1, 1)-configured network applying a symmetric balanced incomplete block design, where $v\;=\;k^2$\;+\;k\;+\;1$. Our algorithm needs only $O(\sqrt[v]{v})$ communication overhead and each node receives workload information from all the nodes without redundancy. Therefore, load balancing is maintained since every link has the same amount of traffic for transferring workload information.