• 한국동물위생학회지
• /
• 제22권3호
• /
• pp.247-255
• /
• 1999

Sequential morphologic changes in the lymphoid organs were examined after ocular and cloacal inoculation in 3weekold chicks with a highly virulent strain (SH/92) of infectious bursal disease virus (IBDV). The infected chickens were sacrificed at 6, 12, 24, 48, 72, and 96 hrs post inoculation (Pl), and thymus, harderian gland, ceacal tonsil, and spleen were observed. Histologically, the significant lesions were characterized by lymphocyte depletion and the earliest detectable changes were evident at 12 hrs Pl. In thymic cortex, lymphoid depletion with apoptosis and prominent "tingible body macrophages" were observed. As the infection advanced, the lesions showed more severe changes. Dying cells were characterized either by capping of nuclear chromatin (apoptosis) or by cytoplasmic swelling (necrosis). In situ staining for apoptosis, some lymphoid cells revealed typical positive reaction, even the stainability was variable depend on every lymphoid organs. These results suggest that IBBV (SH/92) cause severe damage both primary and secondary lymphoid organs, and both T and B lymphocytes. Also the lymphoid depletion of these organs is caused by necrosis and apoptosis induced by IBDV.d by IBDV.

• Preventive Nutrition and Food Science
• /
• 제10권3호
• /
• pp.207-213
• /
• 2005

Molecular structures and functional properties of starches isolated from normal, waxy, and zero amylose barleys were examined. Amylopectins from zero amylose starch had the largest molecular weight $(M_w)$, whereas those from high amylose starch, the smallest. A good correlation between the $(M_w)$ and the radius of gyration $(R_g)$ was observed among amylopectins from various starches, indicating similar polymeric conformation in solution even with the differences in the $(M_w)$. The debranched amylopectin molecules from different types of barley starches exhibited similar profiles, implying that the packing geometry of double helices in the different types of barley starches may be similar. Zero amylose starch showed the highest peak viscosity (326 RVU) in RV A viscograms at lower pasting temperature $(67.6^{\circ}C)$, compared to normal and high amylose starches. Relationship between RVA peak viscosity and amylose content suggested that the presence of amylose inhibited the development of granular swelling of barley starches during cooking. A rapid retrogradation, traced by differential scanning calorimetry (DSC) and strain-controlled rheometry, occurred in the high amylose starch sample during storage, while zero amylose starch showed a very good resistance to retrogradation, indicating excellent storage stability.

• 대한수의학회지
• /
• 제60권3호
• /
• pp.109-116
• /
• 2020

This study aimed to develop a semi-nested polymerase chain reaction assay for the direct detection of Mycoplasma synoviae (M. synoviae) from clinical samples using three newly designed oligonucleotide primers specific to the variable lipoprotein haemagglutinin (vlhA) gene and differentiate M. synoviae field strains based on a nucleotide deletion or the insertion of the proline-rich repeat (PRR) region of the vlhA gene. The developed semi-nested polymerase chain reaction (PCR) assay revealed positive results in 12 out of 100 clinical samples collected from chickens showing lameness and joint swelling. Six positive samples were selected randomly for sequencing, and sequence analysis revealed 96.3-100% nucleotide identities compared to the reference sequences. Phylogenetic analysis showed that sequences of the strains in this study were closely related to WVU1853 (Spain), CK.MS.UDL.PK.2014.2 (Pakistan), and F10-2AS (USA) strains, but they were distinct from the M. synoviae-H vaccine strain sequence. M. synoviae obtained from these samples were identified as types A and C with a length of 38 and 32 amino acids, respectively. These results indicated that the specific and sensitive semi-nested PCR could be a useful diagnostic tool for the direct identification of clinical samples, and the sequence analysis of the partial vlhA gene can be useful for typing M. Synoviae.

• 에너지공학
• /
• 제13권3호
• /
• pp.181-190
• /
• 2004

Computational models for analyzing the in-reactor behavior of metallic fuel pins under transient conditions in liquid-metal reactors are developed and implemented in the TRAMAC (TRAnsient thermo-Mechanical Analysis Code) for a metal fuel rod under transient operation conditions. Not only the basic models for a fuel rod performance but also some sub-models used for transient condition are installed in TRAMAC. Among the models, a fission gas release model, which takes the multi-bubble size distribution into account to characterize the lenticular bubble shape and the saturation condition on the grain boundary and the cladding deformation model have been developed based mainly on the existing models in the MAC-SIS code. Finally, cladding strains are calculated from the amount of thermal creep, irradiation creep, and irradiation swelling. The cladding strain model in TRAMAC predicts well the absolute magnitudes and gen-eral trends of their predictions compared with those of experimental data. TRAMAC results for the FH-1,2,6 pins are more conservative than experimental data and relatively reasonable than those of FPIN2 code. From the calculation results of TRAMAC, it is apparent that the code is capable of predicting fission gas release, and cladding deformation for LMR metal fuel finder transient operation conditions. The results show that in general, the predictions of TRAMAC agree well with the available irradiation data.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.74-83
• /
• 1994

A series of isotropic consolidation tests, undrained and drained triaxial compression tests was carried out to investigate the physical characteristics and behaviours of marine silty sands collected from the western coast of Korea. This study also included a theoretical development of the constitutive equation to evaluate stress-strain relationship and volume change of silty sands. The results and main conclusions of the study are summarized as follows; 1. Isotropic compression and swelling index are linearly decreased with an increase in relative density. 2. Both undrained shear strengh and elastic modulus are increased with an increase in relative density and confining pressure. 3. Internal friction angles obtained from drained and undrained compression tests of the soils are proportional to relative density. 4. The phenomenon of dilatancy of each sample is less profound when confining stress is increased but more profound when relative density is increased. 5. The slope of critical state lines is 1.78 for Saemangum, 1.70 for Siewha and 1.26 for Sukmoon sands. 6. In this study, Drucker-Praper type criterion is used and hardening function of Cap model is modified by hyperbolic fuction. This will improve a lack of physical meaning of hardening parameters in conventional Cap model. 7. A newly developed constitutive equation to the forementioned silty sands and checked its applicability. This is in good agreement with the measured data.

• 대한수의학회지
• /
• 제21권1호
• /
• pp.33-40
• /
• 1981

In order to clarify the morphological changes in the mammary glands of cows affected with coliform (Escherichia coli) mastitis, histopathological observations were undertaken on the mastitis of the lactating rabbits which was experimentally induced with E. coli or its endotoxin isolated from cases of acute and chronic matitis in dairy cattle. In the bacterial suspension-infused groups the affected quarters of udder showed cloudy swelling, hyperemia and hemorrhage to local necrosis and firmness. The microscopic findings of early stage of the mastitis were appearance of large numbers of heterophils in the glandular lumina and ducts accompanied by degeneration, necrosis and desquamation of epithelial cells, and also infiltration of heterophils, hemorrhage and edema in the interstitial tissue, and destruction of alveoli. Later, proliferation of firoblasts, plasma cells, lymphocytes, eosinophils and histiocytes appeared in the glandular tissue and necrotic foci of glandular tissue were surrounded by highly proliferated connective tissue. Granuloma-like inflammatory changes could be observed in the glandular tissue on the 7th days after infusion. The inflammatory response in the group infused with E. coli strain isolated from the natural case of acute mastitis was rapid and severe as compared with that of chronic mastitis. In the endotoxin-infused group the morphological changes were similiar to those of the bacterial suspension-infused groups.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.605-616
• /
• 2014

When the periodic cellular structure is loaded or swelling beyond the critical value, the structure may undergo a pattern transformation owing to the local elastic instabilities, thus leading to structural collapse and the structure changing to a new configuration. Based on this deformation-triggered pattern, we have proposed the novel composite gel materials. This designed material is a type of architectural material possessing special mechanical properties. In this study, the mechanical behavior of the composite gel periodic structure with various gel inclusions is studied further through numerical simulations. When pattern transformation occurs, it results in a different elastic relationship compared with the material at untransformed state. Based on the obtained nominal stress versus nominal strain behavior, the Poisson's ratio and corresponding deformed structure patterns, we investigate the performance of designed composite materials and the effects of the uniformly distributed gel inclusions on composite materials. A better understanding of the characteristics of these composite gel materials is a key to develop its potential applications on new soft machines.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.225-231
• /
• 2019

Bio-based polyester polyol was synthesized via esterification between azelaic acid and isosorbide. After esterification, bio-based polyurethanes were synthesized using polyester polyol, 1,3-propanediol as the chain extender, and 4,4'-diphenylmethane diisocyanate, in mixing ratios of 1:1:1.5, 1:1:1.8, 1:1:2, and 1:1:2.3. The bio TPU (Thermoplastic Polyurethane) samples were characterized by using FT-IR (Fourier Transform Infrared Spectroscopy), TGA (Thermal Gravimetric Analysis), DSC (Differential Scanning Calorimetry), and GPC (Gel Permeation Chromatography). The mechanical properties (tensile stress and hardness) were obtained by using UTM, a Shore A tester, and a Taber abrasion tester. The viscoelastic properties were tested by an Rubber Processing Analyzer in dynamic strain sweep and dynamic frequency test modes. The chemical resistance was tested with methanol by using the swelling test method. Based on these results, the bio TPU synthesized with the ratio of 1:1:2.3, referred to as TPU 4, showed the highest thermal decomposition temperature, the largest molecular weight, and most compact matrix structure due to the highest ratio of the hard segment in the molecular structure. It also presented the highest tensile strength, the largest elongation, and the best viscoelastic properties among the different bio TPUs synthesized herein.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.22-29
• /
• 2019

Chitosan-polyvinyl alcohol (PVA) -bamboo charcoal/silica (CS-PVA-BC/SI) hybrid fillers with compatibilized styrene-butadiene rubber (SBR) composites were fabricated by the interpenetrating polymer network (IPN) method. The structure and composition of the composite samples were characterized by scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FT-IR). The viscoelastic behaviors of the rubber composites and their vulcanizates were explored using a rubber processing analyzer (RPA) in the rheometer, strain sweep and temperature sweep modes. The storage and loss moduli of SBR increased significantly with the incorporation of different hybrid fillers, which was attributed to the formation of an interphase between the hybrid fillers and rubber matrix, and the effective dispersion of the hybrid fillers. The mechanical properties (hardness, tensile strength, oxygen transmission rate, and swelling rate) of the composite samples were characterized in detail. From the results of the mechanical test, it was found that BC-CS-PVA0SBR had the best mechanical properties. Therefore, the BC-CS-PVA hybrid filler provided the best reinforcement effects for the SBR latex in this research.

• Clinical Pain
• /
• 제18권2호
• /
• pp.107-110
• /
• 2019

Flexor carpi radialis (FCR) muscle is located in the forearm anteriorly that runs through a synovial fibro-osseous tunnel in the forearm. We described a case of FCR tendon rupture due to repetitive overuse injury. A 55-year-old man, right-hand dominant, presented with right forearm pain and swelling which started 3 days ago while playing amateur golf. Focal tenderness and bruising over volo-ulnar region of the right forearm were examined. Plain radiographs showed soft tissue edema around lesion area and no detectable fracture. Ultrasonography showed multiple hypoechoic lesions suspected as hematoma of the flexor muscle group. After done magnetic resonance imaging, he was diagnosed with rupture of FCR tendon at proximal origin and strain of flexor digitorum superficialis and palmaris longus muscle. He received compressive dressing and restriction of wrist range of motion for three weeks. Two months later, remaining traces of lesions were observed at the follow-up ultrasonography and the pain disappeared.