• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.23-30
• /
• 1988

The sustained-release micropellets containing rifampicin were prepared by spray congealing micropelleting technique using gelatin as the embedding matrix, and hardened by treating with the formalin-isopropanol mixture. Dissolution of rifampicin from micropellets was significantly retarded, and greatly dependent on formalin concentration, hardening time and pH of the dissolution medium. It was found that this prolongation was more distinguished in pH 1.2 dissolution medium rather than pH 7.4, which might be attributed to the swelling characteristics of gelatin used in the dissolution medium. In-vitro dissolution kinetics indicated that the drug release followed the first-order process.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.70-75
• /
• 1985

The influence of polyethylene glycol derivatives on heparin release from cylindrical monolithic type silicone segment devices was examined in physical saline solution. This water-soluble carrier caused the devices to absorb the water in aqueous media. The release rate of heparin from the devices was increased as molecular weight of polyethylene glycol was increased. Water soluble carrier incorporated into silitone segment devices permits controlled release of heparin that otherwise would be released extremly slowly from the polymer. Heparin released from the silicone segment containing polyethylene glycol showed the first-order kinetics. Without changing the release-pattern, the release rate of heparin could be controlled by varing molecular weight of polyethylene glycol, the water-soluble carrier and depleting polyethylene glycol on the outlayer of devices. The mechanism of release probably showed the creation of pore or microdomine through the devices secondary to the swelling.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.469-476
• /
• 2009

In this study, biodegradable superporous hydrogels(SPHs) with fast swelling and superabsorbent properties were prepared using biodegradable crosslinkers and their physicochemical properties were characterized. A biodegradable crosslinker (PLA-PEG-PLA DA) was synthesized by a ring opening polymerization of D,L-lactide (LA) using hydrophilic poly(ethylene glycol) as a macroinitiator, followed by diacrylation of the end groups for the introduction of polymerizable vinyl groups. Various kinds of hydrogels with different chemical compositions were prepared and characterized in terms of swelling ratio, swelling kinetics, and biodegradation properties. The synthetic results were confirmed by $^1H$-NMR, FT-IR and GPC measurements, and the porous structures of the prepared SPHs and their porosities were identified by a scanning electron microscope and mercury porosimetry, respectively. The physicochemical properties of SPHs could be controlled by varying their chemical compositions and their cytotoxicity were found to be very low by MTT assay.

• Korean Journal of Food Science and Technology
• /
• v.19 no.1
• /
• pp.12-17
• /
• 1987

Physicochemical properties and gelatinization kinetics of Ol barley starch were studied. The granule size was $13-28\;{\mu}$ and the granule shape was oval or circular. Also, Ol barley starch had amylose content of 32%. Swelling power and solubility reached to the maximum values of 7.22 and 2.28% at the gelatinization temperature of $90^{\circ}C$. The pasting temperature of starch was slightly higher than those of powder and defatted powder. Most of the increase in light penetration was accomplished from the gelatinization temperature of $80^{\circ}C$ to $90^{\circ}C$. The gelatinization reaction of lL barley starch occurred in 2 stages. The activation energy of lst stage gelatinization reaction was 23.84 kcal/mole, whereas activation energies of 2nd stage gelatinization reaction were 33.38 and 72.82 kcal/mole around $80^{\circ}C$.

• Polymer(Korea)
• /
• v.30 no.4
• /
• pp.286-292
• /
• 2006

Super water-absorbent resins were prepared by inverse suspension copolymerization of sodium acrylate, acrylamide and 2-hydroxyethyl acrylate using N, N'-methylene-bis-acrylamide as cross-linker. For the suspension copolymerization, monohexadecyl phosphate was employed as the dispersing agent, cyclohexane as the dispersing medium and potassium persulfate as the initiator. The dependence of water-absorption capacity on the amount of crosslinking agent, oil/water ratio, degree of neutralization and the composition of the copolymer were systematically investigated. Furthermore, the swelling kinetics of the super water-absorbent copolymer was carried out. The absorption of the resins is more than 1800 g/g for deionized water and 100 g/g for 0.9% NaCl solution, respectively. The copolymers showed an increased salt resistance and enhanced water retention of soil.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.269-273
• /
• 2009

The objective of this investigation was to develop a gastro-retentive(GR) dosage form of gabapentin and was to evaluate of its dissolution characteristics. GR tablet consists of expandable core tablet matrix and semi-permeable membrane coating. Poloxamer 407 and sodium bicarbonate were used to prepare the core matrix. Polyvinly acetate dispersion (Kollicoat $SR30D^{(R)}$) and polyvinyl alcohol-polyethylene glycol copolymer ((Kollicoat $IR^{(R)}$)) were employed to form the semi-permeable membrane. The GR tablets significantly expanded up to fivefold in simulated gastrointestinal fluids with no apparent damage of the coating membrane over 12 hours. Also, the swelling rate was controllable with the amount of sodium bicarbonate. The drug release was observed to be substantially sustained based on coating level. The release rate of gabapentin from the GR tablet was gradually slowed down as the coasting amount was increased. The gabapentin GR tablet with 8% coating level showed a pseudo-zero order release kinetics over 12 hours. These results suggest that this swellable GR tablet system having semi-permeable membrane coating can be applicable for hydrophilic drug substances like gabapentin.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.207-211
• /
• 2000

The objective of this work is to investigate the effect of molecular weight of poly(ethylene oxide) (PEO) and release medium on the release of nifedipine (NP) from PEO tablets containing NP and to get some mechanistic insights into the release of NP. The tablets containing NP were prepared by direct compression, using a flat-faced punch and die. The molecular weights of PEOs used were 200K, 900K, 2000K and 7,000K. The release kinetics were studied for 24 hours in aqueous ethanol solution, using a dissolution tester at $36.5^{\circ}C$ and 100 rpm. Drug release rate increased, as the concentration of ethanol in the dissolution medium increased, due to the increased solubility of NP. As the molecular weight of PEO increased, release rate decreased, due to the slower swelling and dissolution of PEO. The power values obtained by fitting data to the power law expression $(M_t/M_{\infty}=kt^n)$ indicated that, at low ethanol concentration, the release of NP is governed by anomalous diffusion. However, as the ethanol concentration increases, diffusional release becomes to prevail over anomalous or zero-order release. Overall, these results provided some insights into the release of NP from PEO tablet.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1025-1031
• /
• 2009

Several kinds of biodegradable hydrogels were prepared via in situ photopolymerization of Pluronic F127/poly($\varepsilon$-caprolactone) macromer and acrylic acid (AA) comonomer in aqueous medium. The swelling kinetics measurements showed that the resultant hydrogels exhibited both thermo- and pH-sensitive behaviors, and that this stimuli-responsiveness underwent a fast reversible process. With increasing pH of the local buffer solutions, the pH sensitivity of the hydrogels was increased, while the temperature sensitivity was decreased. In vitro hydrolytic degradation in the buffer solution (pH 7.4, $37^{\circ}C$), the degradation rate of the hydrogels was greatly improved due to the introduction of the AA comonomer. The in vitro release profiles of bovine serum albumin (BSA) in-situ embedded into the hydrogels were also investigated: the release mechanism of BSA based on the Peppas equation was followed Case II diffusion. Such biodegradable dual-sensitive hydrogel materials may have more advantages as a potentially interesting platform for smart drug delivery carriers and tissue engineering scaffolds.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.200-208
• /
• 2019

Probiotics show low cell viability after oral administration because they have difficulty surviving in the stomach due to low pH and enzymes. For the oral delivery of probiotics, developing a formula that protects the probiotic bacteria from gastric acidity while providing living cells is mandatory. In this study, we developed tablets using a new pH-sensitive phthalyl inulin (PI) to protect probiotics from gastric conditions and investigated the effects of different compression forces on cell survival. We made three different tablets under different compression forces and measured survivability, disintegration time, and kinetics in simulated gastric-intestinal fluid. During tableting, there were no significant differences in probiotic viability among the different compression forces although disintegration time was affected by the compression force. A higher compression force resulted in higher viability in simulated gastric fluid. The swelling degree of the PI tablets in simulated intestinal fluid was higher than that of the tablets in simulated gastric fluid due to the pH sensitivity of the PI. The probiotic viability formulated in the tablets was also higher in acidic gastric conditions than that for probiotics in solution. Rapid release of the probiotics from the tablet occurred in the simulated intestinal fluid due to the pH sensitivity. After 6 months of refrigeration, the viability of the PI probiotics was kept. Overall, this is the first study to show the pH-sensitive properties of PI and one that may be useful for oral delivery of the probiotics.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.739-746
• /
• 2017

As alternatives to antibiotics in livestocks, probiotics have been used, although most of them in the form of liquid or semisolid formulations, which show low cell viability after oral administration. Therefore, suitable dry dosage forms should be developed for livestocks to protect probiotics against the low pH in the stomach such that the products have higher probiotics survivability. Here, in order to develop a dry dosage forms of probiotics for poultry, we used hydroxypropyl methylcellulose phthalate 55 (HPMCP 55) as a tablet-forming matrix to develop probiotics in a tablet form for poultry. Here, we made three different kinds of probiotics-loaded tablet under different compression forces and investigated their characteristics based on their survivability, morphology, disintegration time, and kinetics in simulated gastrointestinal fluid. The results indicated that the probiotics formulated in the tablets displayed higher survival rates in acidic gastric conditions than probiotics in solution. Rapid release of the probiotics from the tablets occurred in simulated intestinal fluid because of fast swelling of the tablets in neutral pH. As a matrix of tablet, HPMCP 55 provided good viability of probiotics after 6 months under refrigeration. Moreover, after oral administration of probiotics-loaded tablets to chicken, more viable probiotics were observed, than with solution type, through several digestive areas of chicken by the tablets.