• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.716-718
• /
• 2012

본 연구에서는 가우스분포함수의 형태에 따라 DGMOSFET에 스켈링이론을 적용하였을 때 문턱 전압이하특성의 변화를 분석하고자 한다. 포아송방정식의 분석학적 해를 구할 때 사용하는 전하분포함수에 가우시안 함수를 적용함으로써 보다 실험값에 가깝게 해석하였으며 이때 가우시안 함수의 변수인 이온주입범위 및 분포편차에 대하여 문턱전압이하 특성의 변화를 관찰하였다. 본 연구의 모델에 대한 타당성은 이미 기존에 발표된 논문에서 입증하였으며 본 연구에서는 이 모델을 이용하여 문턱전압이하 특성을 분석할 것이다. 스켈링이론은 소자파라미터의 변화에 대하여 출력 특성을 변함없이 유지하기 위하여 적용하는 이론이다. DGMOSFET에 스켈링이론을 적용한 결과, 가우스함수의 형태에 따라 문턱전압이하 특성이 매우 크게 변화하였으며 특히 문턱전압의 변화는 상대적으로 매우 크게 나타난다는 것을 관찰하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.237.1-237.1
• /
• 2016

Electrical properties of graphene-based field effect transistors (G-FETs) can be degraded in ambient conditions owing to physisorbed oxygen or water molecules on the graphene surface. Passivation technique is one of a fascinating strategy for fabrication of G-FETs, which allows to sustain electrical properties of graphene in the long term without disrupting its inherent properties: transparency, flexibility and thinness. Ironically, despite its importance in producing high performance graphene devices, this method has been much less studied compared to patterning or device fabrication processes. Here we report a novel surface passivation method by using atomically thin self-assembled alkane layers such as C18- NH2, C18-Br and C36 to prevent unintentional doping effects that can suppress the degradation of electrical properties. In each passivated device, we observe a shift in charge neutral point to near zero gate voltage and it maintains the device performance for 1 year. In addition, the fabricated PG-FETs on a plastic substrate with ion-gel gate dielectrics exhibit not only mechanical flexibility but also long-term stability in ambient conditions. Therefore, we believe that these highly transparent and ultra-thin passivation layers can become a promising candidate in a wide range of graphene based electronic applications.

• 한국정보통신학회논문지
• /
• 제16권6호
• /
• pp.1260-1265
• /
• 2012

본 연구에서는 가우스분포함수의 형태에 따라 DGMOSFET에 스켈링이론을 적용하였을 때 문턱전압이하특성의 변화를 분석하고자 한다. 포아송방정식의 분석학적 해를 구할 때 사용하는 전하분포함수에 가우시안 함수를 적용함으로써 보다 실험값에 가깝게 해석하였으며 이때 가우시안 함수의 변수인 이온주입범위 및 분포편차에 대하여 문턱전압이하 특성의 변화를 관찰하였다. 본 연구의 모델에 대한 타당성은 이미 기존에 발표된 논문에서 입증하였으며 본 연구에서는 이 모델을 이용하여 문턱전압이하 특성을 분석할 것이다. 스켈링이론은 소자파라미터의 변화에 대하여 출력특성을 변함없이 유지하기 위하여 적용하는 이론이다. DGMOSFET에 스켈링이론을 적용한 결과, 가우스함수의 형태에 따라 문턱전압이하 특성이 매우 크게 변화하였으며 특히 문턱전압의 변화는 상대적으로 매우 크게 나타난다는 것을 관찰하였다.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.710-714
• /
• 2007

LSGM$(La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.2}O_{3-{\delta}})$ is the very promising electrolyte material for lower-temperature operation of SOFCs, especially when realized in anode-supported cells. But it is notorious for reacting with other cell components and resulting in the highly resistive reaction phases detrimental to cell performance. LDC$(La_{0.4}Ce_{0.6}O_{1.8})$, which is known to keep the interfacial stability between LSGM electrolyte and anode, was adopted in the anode-supported cell, and its effect on the interfacial reactivity and electrochemical performance of the cell was investigated. No severe interfacial reaction and corresponding resistive secondary phase was found in the cell with LDC buffer layer, and this is due to its ability to sustain the La chemical potential in LSGM. The cell exhibited the open circuit voltage of 0.64V, the maximum power density of 223 $mW/cm^2$, and the ohmic resistance of $0.17{\Omega}cm^2$ at $700^{\circ}C$. These values were much improved compared with those from the cell without any buffer layer, which implies that formation of the resistive reaction phases in LSGM and then deterioration of the cell performance is resulted mainly from the La diffusion from LSGM electrolyte to anode.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.326-330
• /
• 2013

The Korea Superconducting Tokamak Advanced Research (KSTAR) device is an advanced superconducting tokamak to establish scientific and technological bases for attractive fusion reactor. This device requires 3.5 Tesla of toroidal field (TF) for plasma confinement, and requires a strong poloidal flux swing to generate an inductive voltage to produce and sustain the tokamak plasma. KSTAR was originally designed to have 16 serially connected TF magnets for which the nominal current rating is 35.2 kA. KSTAR also has 7 pairs of poloidal field (PF) coils that are driven to 1 MA/sec for generation of the tokamak plasma according to the operation scenarios. The KSTAR Magnet Power Supply (MPS) was dedicated to the superconducting (SC) coil commissioning and $2^{nd}$ plasma experiment as a part of the system commissioning. This paper will describe key features of KSTAR MPS for the $2^{nd}$ plasma experiment, and will also report the engineering and commissioning results of the magnet power supplies.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.25-31
• /
• 2008

유도전동기의 자계는 전류의 방향에 따라 자화 및 감자되는 특성을 가지고 있다. 전통기의 자계를 형성하는데 필요한 자화전류는 유도성으로 무효전력의 대부분을 차지하고 있다. 무효전력은 유도전동기가 동작하는데 필요한 자계를 지속시키는 역할을 한다. 유도전통기의 역률은 낮은 편이므로 역률 보상이 필요하다. 유도전동기를 정격출력보다 낮은 부하로 운전할 경우 유효전력에 비해 무효성분의 비율증가로 역률이 낮아진다. 역률 보상장치의 용량은 전동기 정격에 맞도록 설치하기를 권고하고 있다. 그러나 부하의 운전상황에 따라 역률 보상용 커패시터 값은 수정하기가 어렵다. 본 논문에서는 저압 소용량 유도 전동기에 연결된 부하의 변화에 따라 전력 및 역률의 동작특성을 해석한 결과 기존에 제시된 낮은 역률 보상용 파라미터는 수정되어야 함을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.135-135
• /
• 2015

Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.