• International Journal of Fluid Machinery and Systems
• /
• v.4 no.4
• /
• pp.375-386
• /
• 2011

The turbo-type blood pump studied in this paper has an impeller that is magnetically suspended in a double volute casing. The impeller rotates with minimal fluctuations caused by fluid and magnetic forces. In order to improve stability of the rotating impeller and to facilitate long-term use, a careful investigation of the pressure fluctuations and of the fluid force acting on the impeller is necessary. For this purpose, two models of the pump with different volute cross-sectional area are designed and studied with computational fluid dynamics software. The results show that the fluid force varies with the flow rate and shape of the volute, that the fluctuations of fluid force decrease with increasing flow rate and that the vibratory movement of the impeller is more efficiently suppressed in a narrow volute.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.871-878
• /
• 2003

With the development of micro -technology, the demand for micro actual ing device is increasing. But, it is difficult to achieve high resolution and wide bandwidth with the conventional contact systems. So, the contact-free systems which are suspended or levitated by magnetic force or air bearing were proposed. These systems can be applied to high precision stages and alignment apparatuses. This paper describes a magnetically suspended system with four degrees of freedom which are composed of three rotations (roll, pitch, yaw), and one translation ( z). The operating principle and the structure of the system are similar to variable reluctance type electric machines. In this study, the force analysis is executed using magnetic circuit and virtual work principle, and the equations that describe the dynamics of the system are presented. The multivariable PID controller is adapted to the system and the experiment is executed.

• Journal of Mechanical Science and Technology
• /
• v.17 no.5
• /
• pp.708-717
• /
• 2003

With the development of precision manufacturing technologies, the importance of precision positioning devices is increasing. Conventional actuators, dual stage or mechanically contacting type, have limitation in coping with performance demands. As a possible solution, magnetic suspension technology was studied. Such a contact-free system has advantages in terms of high accuracy, low production cost and easy adaptability to high precision manufacturing processes. This paper deals with magnetically suspended multi-degrees of freedom actuator which can realize large linear motion. In this paper, the operating principle is explained with the magnetic force analysis, and the equations of motion are derived. Experimental results of the implemented system are also given.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.9
• /
• pp.663-670
• /
• 2003

As the micro-technologies in the high precision manufacturing processes are developed, the demand for micro actuating device is increasing. But, it is difficult to achieve high resolution and wide operating range simultaneously with the conventional actuating systems which are contacting and type of dual servo system. So, the contact-free surface actuators whose movers are suspended or levitated were proposed. These systems can be applied to high precision stages and alignment apparatuses. The suspended mover can be assumed to be rigid body, but the mover is a structure in this study, therefore the vibration caused during the operating process has a serious adverse effect on the performance and it is very important to identify the vibrational characteristics. In this paper, a contact-free surface actuator is modeled in finite element method and updated by using the experimental modal data. Finally, the static and dynamic characteristics of the finite element model are predicted and then discussed.

• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.193-209
• /
• 1995

The purpose of this study was to determine the effect of intermittent low - intensity, short duration exercise during hindlimb suspension on the mass, relative weight, myofibrillar protein content, cross-sectional area of Type I and Type II fibers and SDH activity in Type II(plantaris) muscle. To examine the effectiveness of intermittent low-intensity, short duration exercise on mass, myofibrillar protein content and fiber size, the hindlimbs of adult female Wistar rats were suspended(HS) and half of these rats walked on a treadmill for 45 min/day(9 min every 2h) at 5m /min and a 15$^{\circ}$grade (HS-EX). Plantaris wet weight was 19.67% significantly smaller(p<0.005) and relative plantaris weight was 6.25% smaller compared with those of control rats following seven days of hindlimb suspension. Plantaris wet weight and relative plantaris weight increased by 27.66%, 12.22% each through intermit-tent exercise during hindlimb suspension(p<0.005, p<0.05), moreover, plantaris wet weight and relative plantaris weight of the HS-EX rats were similar to those of control rats. Soleus wet weight and relative soleus weight decreased significantly by 31% and 22.0% in the HS rats(p<0.05). Soleus wet weight and relative soleus weight increased by 10.41%, 25.64% respectively through intermittent ex-ercise during hindlimb suspension, furthermore, soleus wet weight and relative weight of the HS-EX rats were closer to those of control rats. Myofibrillar protein content of plantaris and soleus decreased significantly by 51.49%, 59.65% each, following seven days of hindlimb suspension (p<0.005) Myofibrillar protein content of plantaris and soleus increased by 51.79%, 75.47% each with significance through intermittent exercise during hindlimb suspension(p<0.005). Myofibrillar protein content of plantaris and soleus in HS-EX rats was smaller than that of control rats. No change was observed in fiber type percentage following 1 week of hindlimb suspension or exercise during hindlimb suspension. The type I fiber cross-sectional area of both soleus and plantaris muscle was 18.72% and 41.07% lower in the HS than that of the controls (p<0.05, p<.001), that of both muscles was 6.60% and 29. 3％ greater in the HS-EX than that of the HS rats. HS plus intermittent low- intensity short duration exercise resulted in Type I fiber cross-sectional area closer to the controls. Type II fiber cross-sectional area of both plantaris and soleus muscle was 22.45% and 22.58% sl nailer in the HS than in the controls, that of both muschles in the HS-EX was 14.10%, 5.78% greater than HS. Intermittent exercise during hindlimb suspension resulted in Type I, II fiber cross-sectional area closer to the control value. There was no change in SDH activity following 1week of hindlimb suspension or exercise during hindlimb suspension in the plantaris muscle. The results suggest that intermittent low intensity short duration exercise can ameliorate Type II muscular atrophy Induced by hindlimb suspension.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.337-344
• /
• 1990

Slime sampless from 10 ratating biological contactor (RBC) plants in New Jersey were microscopically examined. Filamentous bacteria such as Type 1701, Type 0041, Type 021N, Nocardia, Beggiatoa, and Sphaerotilus, which are commonly present as suspended forms also were found in RBC slimes growing as attached forms. However, the abundance wwas much different from that of activated sludge. In RBC slimes, Beggiatoa was most frequently observed filamentous bacteria and Sphaerotilus, Type 0041, Type 1701, Type 021N and Nocardia were present in decreasing order of abundance. There were morphologically two different types of Behhiatia in RBC slimes. The statistical anaysis shows that filamentous bacterial poulations between the 100 cm inside and the outside the RBC were different in most cases with significant interactions between the location and stage.

• Journal of Korean Academy of Nursing
• /
• v.23 no.2
• /
• pp.207-223
• /
• 1993

Inpatients are mostly occupied in bed with restricted activity, nearly all patient populations are at risk for the occurrence of skeletal muscle atrophy due to decreased level of activity. Restriction of mobility is far greater in pediatric patients compared with adult patients since almost all the activities of daily living is performed by parents or caregivers. It could be assumed that pediatric patients are more vulnerable to skeletal muscle atrophy than adult patients, however, there have been no attempts to reduce the atrophy of developing muscle. Therefore it is important to determine the effect of exercise in developing muscle during decreased activity. The purpose of this study was to determine the effect of periodic weight support during hindlimb suspension on the mass and cross-sectional area of Type I and II fibers in developing soleus(Type I ) muscle. To examine the effectiveness of periodic weight support activity in maintaining mass and fiber size. the hindlimb of young female Wistar rats was suspended(HS) and half of these rats walked on a treadmill for 45min / day(15min every 4h) at 5m / min at a 15 grade(HS-WS). After 7days of hindlimb suspension, soleus wet weight was 28. 57% smaller and relative soleus weight was 28. 21% smaller in comparison with con-trol rats (p〈0.05) Soleus wet weight and relative soleus weight increased by 67.72% and 71.43% each with periodic weight support activity during hindlimb suspension (p〈0.01, p〈0.005), moreover soleus wet weight and relative soleus weight of the HS -WS rats were greater than those of the control group. No change was observed in fiber type percentage of the developing soleus muscle after 1 week of hindlimb suspension plus weight support activity. Type I and II fiber cross-sectional areas of the developing soleus muscle were 50.45% and 43.39% lower in the HS group than in the control group (p〈0.0001), type I and II fiber cross-sectional areas of the developing soleus were 24.49% and 29.93% greater in the HS - WS group than in the HS rats (p〈0.0001), whereas Type I and II fiber cross-sectional areas of HS - WS group were less than those of the control group, The results suggest that periodic weight support activity can ameliorate developing soleus muscle atrophy induced by hindlimb suspension, even in type II fibers that would not have been expected to be recruited by this type of neuromuscular demand. Clinical experimental study is needed to deter-mine the effect of periodic weight bearing exercise on developing atrophied leg muscle based on these results.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.4
• /
• pp.278-287
• /
• 1993

In order to calssify smog type durnig the summer season in Seoul, air Quality and meterorological data were analyzed by multivariate analysis. Among 15 variables relating to visibility, 10 variables were selected by multiple regression analysis for clustering of smog types; total suspended particle, sulfur dioxide, ozone, ntrogen dioxide, total hydrocarbon, south-north wind component, ralative humidity, precipitable water, mixing height and air temperature. Somg types were grouped into three clusters using cubic clustering criterion and the mumbers of days in each cluster were contained 74, 28 and 16 days. Each cluster was seperated clearly by sulfur dioxide, precipitable water and air teperature. The first cluster was representative of high ozone concentration and prevailing meterological conditions for ozone formation. Therefore, visibility in the first cluster was considered to be affected by photochemical smog. The third cluster showed characteristics of sulphurous smog type due to the higher concentration of primary pollutant, based on the dry condition than that in another cluster. On the other hand, the characteristic of the second cluster was not relatively clear, but considered to be in an intermediate characteristic between photochemical smog and sulphurous smog type.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.432-442
• /
• 2013

For magnetically suspended flywheel (MSFW) with gimballing capability, demerits of Lorentz force-type magnetic bearings and common reluctance force-type magnetic bearings are analyzed, a novel reluctance forcetype magnetic bearing (RFMB) including radial and axial magnetic bearing units with 4 separate biased permanent magnets and two conical stators is presented. By equivalent magnetic circuits' method, its magnetic properties are analyzed. To reduce the eddy loss, it was designed as radial poles with shoes and its rotor made of Iron-based amorphousness. Although the uniformity of magnetic flux density in the conical air gap determines mainly the additional tilting torque, the maximum additional tilting torques is 0.05Nm and the rotor tilting has no influence on its forces when the rotor tilts or the maximum changes does not exceed 14% when the rotor drifts and tilts simultaneously. The MSFW with this RFMB can meet the maneuvering requirement of spacecraft theoretically.

• Journal of The Korean Association For Science Education
• /
• v.33 no.4
• /
• pp.863-879
• /
• 2013

The purpose of this study was to analyze task commitment types of science learning in high school students' biology classification. Thirty students were selected as the representatives of five task commitment types according to task commitment type inventory scores. They participated in think-aloud biology classification task. To analyze the procedural characteristics of task commitment, a coding scheme and think-aloud task were developed. Characteristics of respective task commitment types were identified from the result of the think-aloud protocol coding analysis. They are TGC(task goal commitment) type, LGC(low goal commitment) type, CC(conditional commitment) type, SC(suspended commitment) type, and DC(delayed commitment) type. Findings gained from this study are expected to serve as the foundation of task commitment enhancement strategies and as the information on the characteristics of each task commitment type. Also, future studies are required to investigate the commitment-related properties not only in biology classification but also in other science learning situations.