• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권5호
• /
• pp.254-259
• /
• 2019

Objectives: Crown-root fracture and cervical caries in maxillary premolars constitute a challenge in cases of subgingival placement of restoration margins. Surgical extrusion has been practiced successfully in permanent anterior teeth. The aim of the present retrospective study was to assess the clinical outcome of surgical extrusion after orthodontic extrusion in maxillary premolars. Materials and Methods: Twenty-one single, tapered root maxillary premolars with subgingival crown-root fracture or caries were included. Presurgical orthodontic extrusion was performed on all teeth to prevent root resorption. Extent of extrusion and rotation was determined based on crown/root ratio. The postoperative splinting period was 7 to 14 days. Clinical and radiographic examination was performed at an interval of 1, 2, and 3 months. Results: After the mean follow-up of $41.9{\pm}15.2months$, failure was observed as increased mobility in 3 of 21 cases. No significant difference was observed in the outcome of surgical extrusion based on tooth type, age, sex, $180^{\circ}$ rotation, or time for extraction. Furthermore, marginal bone loss was not observed. Conclusion: Surgical extrusion of maxillary premolars can be a possible therapeutic option in cases of subgingival crown-root fracture.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.287-295
• /
• 2007

As a general treatment modality of subgingival tooth defect in aethetic area, implant or crown and bridge therapy after extraction of affected tooth can be used. But as more conservative treatment, crown lengthening can be considered and not to lose periodontal attachment and impair aethetic appearance, surgical extrusion can be considered as a treatment of choice. In this case report, 3 cases of surgical extrusion was represented and appropriate time for initiation of endodontic treatment according to the post-surgical tooth mobility was investigated. In 8 patient who has subgingival tooth defect in aethetic area, intracrevicular incision is performed and flap was reflected with care not to injure interproximal papillae. With forcep or periotome, tooth was luxated and sutured in properely extruded position according to biologic width with or without $180^{\circ}$ rotation. 8 cases show favorable short and long term results. In some cases, surgical extrusion with $180^{\circ}$ rotation can minimized extent of extrusion and semi-rigid fixation without apical bone graft seems to secure good prognosis. In 8 cases, endodontic treatment started about 3 weeks after surgery. This time corresponds with the moment when mobility of extruded tooth became 1 degree and this results concide with other previous reports. If it is done on adequate case selection and surgical technique, surgical extrusion seems to be a good treatment modalilty to replace the implant restoration in aethetic area.

• Restorative Dentistry and Endodontics
• /
• 제41권1호
• /
• pp.63-67
• /
• 2016

During clinical endodontic treatment, we often find radiopaque filling material beyond the root apex. Accidental extrusion of calcium hydroxide could cause the injury of inferior alveolar nerve, such as paresthesia or continuous inflammatory response. This case report presents the extrusion of calcium hydroxide and treatment procedures including surgical intervention. A 48 yr old female patient experienced Calcipex II extrusion in to the inferior alveolar canal on left mandibular area during endodontic treatment. After completion of endodontic treatment on left mandibular first molar, surgical intervention was planned under general anesthesia. After cortical bone osteotomy and debridement, neuroma resection and neurorrhaphy was performed, and prognosis was observed. But no improvement in sensory nerve was seen following surgical intervention after 20 mon. A clinician should be aware of extrusion of intracanal medicaments and the possibility of damage on inferior alveolar canal. Injectable type of calcium hydroxide should be applied with care for preventing nerve injury. The alternative delivery method such as lentulo spiral was suggested on the posterior mandibular molar.

• 대한치과의사협회지
• /
• 제57권11호
• /
• pp.679-688
• /
• 2019

A 8-year-old patient presented with a crown-root fracture of the maxillary right central incisor with an oblique subgingival fracture line. A multidisciplinary treatment approach including endodontic treatment, surgical extraction and intraalveolar repositioning was used to gain sufficient crown length of the fractured maxillary incisor. The coronally repositioned maxillary right central incisor was stabilized by a resin wire splint. Apexification using MTA was performed. Resin core and direct resin restoration(Cl IV) on fractured teeth was built up. Clinical and radiographic follow-up of the maxillary right central incisor after 36 months showed no signs of root resorption or pathology and acceptable aesthetics and functions were maintained. Surgical extrusion can be considered as a good treatment modality for young patients.

• 구강회복응용과학지
• /
• 제36권4호
• /
• pp.262-271
• /
• 2020

변연골 하방으로까지 파절선이 연장된 치아를 수복하기 위해 파절선의 노출 및 생물학적 폭경의 재확립을 위한 삭제형 골수술을 동반한 외과적 치관 연장술을 고려해 볼 수 있다. 그러나 이 술식은 특히 전치부에서 심미성을 훼손시킬 수 있다. 따라서 지지골과 치은을 희생시키지 않으면서 파절선을 치조와 하방에서 상방으로 위치 시킬 수 있는 교정적 정출술이 권장된다. 이 술식은 생물학적 폭경의 재확립과 더불어 수복물을 건전한 치아 구조에 위치할 수 있도록 해 준다. 또 다른 대안으로, 교정적 정출술 보다 방법이 간단하며 시간이 적게 소요되고 한번의 술식만으로 정출이 완료되는 외과적 정출술도 고려해 볼 수 있다. 외과적 정출술을 이용할 경우 구강내 교정 장치를 위치시키고 조정하기 위해 환자가 치과에 여러번 방문할 필요가 없다. 본 연구에서는 상악 중절치에서 치관-치근 파절이 발생한 경우 교정적 정출술 또는 외과적 정출술을 통한 다각적 방법을 병용함으로써 성공적으로 수복한 증례를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제50권3호
• /
• pp.204-209
• /
• 2012

치은연 하방에 치아 우식증이나 치아 파절이 발생했을 때, 치아를 탈구시켜 즉시 정출시키는 외과적 정출술을 이용한 치관 연장술은 자연치를 보존하고 추가적인 치주적 수술 없이 단기간에 심미적인 보철 치료를 가능하게 한다. 본 환자는 16세 남환으로 본원 보존과로부터 상악 좌측 중절치의 심미 수복을 위해 본원 보철과로 의뢰되었다. 상악 좌측 중절치는 근관치료가 되어 있었으며 치관-치근 파절로 인해 협측 치관 길이는 4mm였으며 구개측 판막을 열었을 때 근심 구개측 치경부 파절 범위는 치은 하방 3-4mm에 위치하였다. 외과적 정출술을 통한 치관연장술을 시행하였으며 경과 관찰 및 임시 치아의 단계를 거쳐 3개월 후에 전부 도재관으로 수복하여 만족할 만한 임상결과를 얻을 수 있었다.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.305-312
• /
• 2008

치아의 치관-치근 파절은 치아파절이 치관과 치근에 걸쳐 발생되어 법랑질, 상아질 및 백악질까지 이환된 경우로 정의되며, 치수이환여부에 따라 복잡파절과 비복잡파절로 분류될 수 있다. 치관-치근 파절의 빈도는 유치열에서 2%, 영구치열에서 5%로 나타나며, 보통 상악 전치부에 호발한다. 이러한 치관-치근 파절된 치아의 수복을 위해서는 생물학적 폭경이 유지되어야 한다. 이를 위하여 사용되는 방법은 골삭제 후 치은절제술, 교정적 견인, 외과적 정출 후 수복하는 방법과, 인위적으로 발치하여 근관치료와 수복 후 재식하는 방법 등이 있다. 이중 외과적 정출술은 치아를 발거하여 파절부를 치은 연상으로 이동시켜 재식하는 방법으로서, 이는 치관부 파절편이 임상치근의 1/2 미만인 경우에 적응증이 될 수 있으며, 발견하지 못한 다른 파절편을 직접 시진할 수 있고 때로는 파절선을 순측에 위치시켜 치료시 시야확보 및 접근이 용이하다는 등의 장점이 있다. 본 증례에서는 외상으로 치관-치근 파절된 미완성 치근단의 상악 중절치를 가진 환아에서 외과적 정출술 후 근관치료와 광중합복합레진을 이용한 치관수복을 시행하였으며, 정기적 검진시 양호한 결과가 관찰됨을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제56권2호
• /
• pp.134-140
• /
• 2018

임상치관이 짧아 보철 수복이 어려운 경우 임상치관연장술이 효과적인 치료법이 될 수 있다. 임상치관 연장을 위한 술식에는 수술적 치관연장술, 교정적 정출술, 외과적 정출술이 있는데, 임상상황을 고려하여 최선의 선택을 해야 한다. 수술적 방법과 교정적 방법을 선택할 때, 적절한 고려사항과 주의점에 대해 여러 증례와 함께 보고하고 결정흐름도를 제시하고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.557-564
• /
• 2008

Purpose: Various methods are used in clinical crown lengthening procedure, Esthetic is more important in anterior region than in posterior region. Therefore when performing clinical crown lengthening procedure in esthetic region, clinicians should choose method which doesn't impair esthetic. Surgical extrusion could be a good method to achieve esthetic results. Material and Methods: Two patients were scheduled to clinical crown lengthening procedure in esthetic region. Teeth were extruded with periotome carefully to the intended level. Extruded teeth were anchored with sutures. Sutures are removed after 7day. Restorations were seated after extruded teeth were stabilized. Result: Five to six months later, both cases showed favorable esthetic outcome that were harmonious with adjacent teeth. Conclusion: When clinicians are to do clinical crown lengthening procedure in esthetic region, predictable esthetic outcome could be achieved with surgical extrusion.

• 소성∙가공
• /
• 제24권2호
• /
• pp.89-94
• /
• 2015

Medical catheter tubes are disposable devices that are inserted into the body cavities such as the pleura, trachea, esophagus, stomach, urinary bladder, ureter, or blood vessels for surgical procedures. Each hole of the inner tube is called a lumen, which is used as a passage for drug injections, waste discharge, polypus removal, blood transport, or injection of a camera or sensor. The catheter tube is manufactured by extrusion. The flow in the inner extrusion die affects the thickness and diameter of the tube. In the current study computer simulation of flow in an extrusion die for catheter tubing was performed. Velocity, pressure, shear rate, and shear stress were investigated and the die design was examined.