• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.67-67
• /
• 2011

퍼멀로이의 내식성, 기계적 성질 등을 증가시키기 위해 복합도금을 실시하였다. 실리카 나노분말의 분산특성을 Zeta potential을 이용하여 측정하였으며 알칼리 도금액에서 퍼멀로이-실리카 복합도금을 실시하였다. 실리카 나노분말의 응집을 최소로 하기 위하여 전극의 RPM 변화, 첨가제와 초음파의 복합처리에 따른 변화, 전류 밀도 변화를 살펴보았다.

• 품질경영학회지
• /
• 제13권1호
• /
• pp.26-30
• /
• 1985

In the light of the properties of colloids, in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Nylon, wool and silk, the typical amphoteric fibers were dyed with Acid dye and various combinations were prepared by combining pH, temperature and dye concentration, in order to generate flowing electric potential which were measured by microviolt meter and specific conductivity meter. The results were transformed to Zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers, and these data were statistically analysed by principle component analysis.

• 한국환경과학회지
• /
• 제27권3호
• /
• pp.167-177
• /
• 2018

The removal characteristics of As and Se ions from aqueous solution by hexadecyl trimethyl ammonium bromide (HTMAB) modified anthracite (HTMAB-AT) were investigated under various conditions of contact time, pH and temperature. When the pH is 6, the zeta potential value of anthracite (AT) is -24 mV and on the other hand, the zeta potential value of the HTMAB-AT is +44 mV. It can be seen that the overall increase of about 60 mV. Increasing the (+) potential value indicates that the surface of the adsorbent had a stronger positive charge, so adsorption for the anion metal was increased. The isotherm data was well described by Langmuir and Temkin isotherm model. The maximum adsorption capacity was found to be 7.81 and 6.89 mg/g for As and Se ions from the Langmuir isotherm model at 298 K, respectively. The kinetic data was tested using pseudo first and pseudo second order models. The results indicated that adsorption fitted well with the pseudo second order kinetic model. The mechanism of the adsorption process showed that adsorption was dependent on intra particle diffusion model according to two step diffusion. The thermodynamic parameters(${\Delta}G^{\circ}$, ${\Delta}H^{\circ}$, and ${\Delta}S^{\circ}$) were also determined using the equilibrium constant value obtained at different temperatures. The thermodynamic parameters indicated that the adsorption process was physisorption, and also an endothermic and spontaneous process.

• 대한화학회지
• /
• 제54권1호
• /
• pp.93-98
• /
• 2010

본 연구에서는 Urea와 산 처리로 질소 및 산소 관능기가 도입된 다중벽 탄소나노튜브를 각각 제조하였으며, 표면처리에 따른 전기이중층 커패시터 (EDLCs) 특성을 관찰하였다. XPS, zeta-potential, 및 BET 분석방법을 이용하여 구조특성을 확인하였으며, 전기화학적 특성은 1 M 황산용액의 전해질에서 각각 50 $mVs^{-1}$과 100 $mVs^{-1}$의 주사속도로 순환전류 전압곡선 특성 실험을 통해 고찰하였다. 실험 결과로부터 MWNTs의 질소 원소구성비가 늘어날수록 축전용량이 증가하는 것을 확인하였으며, Urea 처리된 MWNTs의 축전용량이 가장 높은 수치를 나타내었다. 이는 전극 표면과 전하 활성종 간의 젖음성이 증가하고, 표면 관능기의 밀도가 증가하기 때문인 것으로 사료된다.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.779-789
• /
• 2013

This study aimed to investigate the emulsifying properties of bovine lactoferrin in food emulsion system. First, lactoferrin solution was prepared to study its surface activities, such as surface adsorption characteristics and ${\zeta}$-potential. Second, some physicochemical properties of lactoferrin emulsion which resulted from variations of environmental conditions (i.e., pH or NaCl addition) were determined. As for surface adsorption characteristics evaluated by surface tension, it was decreased with increasing lactoferrin concentration in solution ($1{\times}10^{-5}{\rightarrow}0.2wt%$) and showed a plateau (${\fallingdotseq}44$mN/m) above 0.01 wt%. It was also changed with pH and the minimum value of 53.8 mM/m was observed at pI of lactoferrin. This was related to changes in ${\zeta}$-potential of the lactoferrin solution with respect to pH. Fat globule size of lactoferrin emulsion was decreased with increasing lactoferrin concentration and a stable emulsion was formed above 0.5 wt% lactoferrin in emulsion with fat globule size $d_{32}$ of ca. 0.33 ${\mu}m$ as confirmed by creaming stability experiment (i.e., Turbiscan). As with surface tension, fat globule size of lactoferrin emulsion also changed with pH and showed a maximum value at pI. As evaluated by Turbiscan, in the presence of NaCl, the lactoferrin emulsion showed instability in particular above 10 mM.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.111-117
• /
• 2008

We have studied surface roughness, contamination of impurity, bonding with some gas element, reflectance and zeta potential on masks to be generated or changed during photolithography/dry or wet etching process. Mask surface roughness was not changed after photolithography/dry etching process. But surface roughness was changed on some area under MoSi film of Cr/MoSi/Qz. There was not detected any impurity on mask surface after plasma dry etching process. Reflectance of mask was increased after variable plasma etching treatment, especially when mask was treated with plasma including $O_2$ gas. Blank mask was positively charged when the mask was treated with Cr plasma etching gas($Cl_2:250$ sccm/He:20 $sccm/O_2:29$ seem, source power:100 W/bias power:20 W, 300 sec). But this positive charge was changed to negative charge when the mask was treated with $CF_4$ gas for MoSi plasma etching, resulting better wet cleaning. There was appeared with negative charge on MoSi/Qz mask treated with Cr plasma etching process condition, and this mask was measured with more negative after SC-1 wet cleaning process, resulting better wet cleaning. This mask was charged with positive after treatment with $O_2$ plasma again, resulting bad wet cleaning condition.

• 멤브레인
• /
• 제12권1호
• /
• pp.41-50
• /
• 2002

하전된 마이크로채널의 전기이중층에서 계면동전기 흐름에 의해 발생되는 흐름전위는 일반적 Helmholtz-Smoluchowski 관계식으로부터 중공사 멤브레인 기공의 제타전위를 결정하는데 적용된다. 흐름전위는 실제 운전상황이나 물리화학적 조건에서의 표면특성 및 기공과 입자간 상호작용에 대한 유용한 실시간 정보를 제공함이 알려져 있다. 무리화학적 인자들이 주공사에 의한 여과에 미치는 영향을 투과플럭스와 흐름전위의 동시적 모니터링으로 고찰하였다. 특히, 본 연구에서는 중공사의 위치에 따른 흐름전위를 측정함으로써 중공사 길이 방향과 멤부레인 오염 진행에 따라 달라지는 케이크층 효과를 규명하는 실험방법을 다루었다. 실험결과, 입자농도가 증가할수록 투과플럭스는 감소하나 흐름전위는 증가하였다. 입자농도가 증가하면서 케이크층 성장은 활발하지만 쌓인 하전 입자들의 표면전하 효과로 흐름전위는 증가한 것이다. 용액의 이온화 세기를 KCI 0.1 mM에서 10mM로 증가하면 투과플럭스와 흐름전위가 함께 감소하였다. 이는, 이온화 세기의 증가로 라텍스입자 주위의 Debye 길이 감소로 치밀한 케이크층이 형성되고, 전기이중층의 얇아진 확산층에 의한 이온흐름의 약화로 흐름전위는 감소한 것을 판단된다.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.109-115
• /
• 2012

2단계 유화중합에 의한 단분산의 블루칼라 착색 poly(styrene-co-acrylic acid) 라텍스를 성공적으로 제조하였다. 0.21 ${\mu}m$의 polystyrene 시드를 이용하여 중합 2단계에서 Blue 606 염료와 acrylic acid의 중합으로 carboxyl 음이온을 갖는 블루칼라 라텍스를 합성하였다. 본 연구에서 제조한 블루칼라 라텍스는 모두 1.01 이하의 우수한 단분산도를 가지며 0.25~0.42 ${\mu}m$ 범위의 입자경을 나타내었다. 중합 2단계에서 acrylic acid 부가시간이 늘어남에 따라 입자경은 증가하였고 30 min 이상으로 늘어남에 따라 콜로이드 안정성을 갖는 블루칼라 라텍스가 제조되었다. 20 wt% AA 농도에서 -145 mV의 제타전위와 $-9.4{\times}10^{-6}\;cm^2/Vs$의 전기영동이동도를 나타내었다. 25 wt% DVB 농도하에서 396.7 K의 높은 유리전이온도를 나타내었다.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2135-2139
• /
• 2000

시아노구아니딘-포름알데히드 수지에 의한 음이온성 콜로이드 입자의 응집현상은 음이온성 입자의 표면전하와 디아미노메틸렌우레아(diaminomethylene urea: DU) 이온과의 전기적인 작용에 기인한다고 보고되어 있다. 본 논문에서는 음이온성 염료폐수를 응집처리하기 위하여 100~500 nm의 양이온성 시아노구아니딘-포름알데히드 수지를 합성하였고, 응집제 수용액의 pH가 낮을수록 응집제의 Zeta potential은 높게 측정되었다. 농도 0.4 g/L 반응성 염료폐수를 응집처리하였을 경우 pH가 3, 5, 7, 9, 11 중에서 pH가 3인 조건이 다른 pH조건보다 COD, 색도 제거율이 높게 나타났으며, pH 3인 조건에서 400 ppm 주입시 COD 74%, 색도 90% 정도 제거할 수 있었다.